Seville Classics SHE18321B User manual

Customer Service Informaon
Telephone: [phone]
Fax: [phone]
Hours: 8:30 AM – 4:30 PM (PST)
Email: Suppor[email protected]
Homepage: www.SevilleClassics.com
062019
FAQs
Q. Can it hold a countertop dishwasher?
A. Sure! Table top holds up to 500 lbs. per shelf and up to 1000 lbs. evenly distributed
across the shelves and top. Its's perfect for appliances.
Q. Can I use it in a restaurant?
A. Yes, our stainless-steel worktable is cered by the NSF to NSF/ANSI Standard 2 -
Food Equipment for use in dry environments like restaurant storage rooms.
Q. Can I change the order of shelves?
A. Yes! Feel free to install the basket or the shelf rst at any height of your choosing.
Safety
Do not p the table over or place upside down.
Do not place more than 1000 lbs. on the desk top.
Specicaons
Dimensions: 24" L x 20" W x 36" H
Weight capacity (top): 300 lbs
Weight capacity (basket): 50 lbs
Weight capacity (boom shelf): 100 lbs
Weight Capacity: 450 lbs. evenly distributed
Weight: 32.3 lbs.
Model: SHE18321B
Thank you for choosing Seville Classics! We hope that you enjoy your new
stainless-steel table. Please read through this user guide for parts list, assembly
instrucons, frequently asked quesons and contact informaon.
062019
Stainless-Steel Top
NSF Kitchen Work Table Cart

Parts List
A. Top (1)
Please make sure you have all the parts on this list.
If you’re missing parts, contact us for replacements at
[phone] or send an email to [e-mail]
1
B. Shelf (1)
C. Poles (4 )
F. Basket (1)
E. Track (2)
I. Feet (4)
H. Wheels (4)
G. Sleeves (24)
2
Assembly Instrucons
STEP 1.
Fit caps to the boom of
LEVELING FEET (I) and
screw into POLES (C).
Or, screw WHEELS (H) into
the base of POLES (C).
STEP. 2
Clip SLIP SLEEVES (G) around
boom grooves.
IMPORTANT: Count up
from boom grooves to
make sure all slip sleeves are
at the same height.
Fit SHELF (B) over slip
sleeves and press down.
STEP 3.
Repeat STEP 2 at the desired
height for the BASKET (F).
STEP. 4
Clip SLIP SLEEVES (G) around
top grooves.
Fit TOP (A) over slip sleeves
and press down.
CONGRATULATIONS!
Enjoy your new stainless-
steel worktable!
OR