Seville Classics NSF WEB452 User manual

Customer Service Informaon
Telephone: [phone]
Fax: [phone]
Hours: 8:30 AM – 4:30 PM (PST)
Email: [e-mail]
Homepage: www.SevilleClassics.com
Cauon
Place heavier items on the lower shelves and lighter ones on the top.
Do not stand or climb on the shelving system.
Do not drop heavy items on the system.
Do not move the system while loaded.
032020
Specicaons
Dimensions: 36" W x 14" D x 56" H
Weight capacity Per shelf Overall
On wheels
70 lbs. (31.75 kg.)
500 lbs. (226.8 kg.)
View assembly online here:
hps://www.youtube.com/watch?v=N6iRVVqBG-I
STEP 6. (Optional)
Insert LABELS (I) to front of BINS (F, G, H).
7-Tier 22-Bin Commercial-Grade NSF
Bin Rack
Model #: WEB452/SHE16511BX
Thank you for choosing Seville Classics! We hope that you enjoy your
commercial-grade steel wire shelving! Please read through this guide for
parts list, assembly instrucons, frequently asked quesons and further
contact informaon.
032020

Parts List
Please make sure you have all the parts on this list.
If you’re missing parts, contact us for replacements at
[phone] or send an email to Supp[email protected]m
1
E. Shelves (7)
G. Large bin (6)
D. Locking wheels (2)
B. Slip-sleeves (28)
Assembly Instrucons
STEP 1.
Screw WHEELS (C, D) into base of
boom poles.
Repeat for all boom poles.
STEP 2.
Snap SLIP SLEEVES (B) around the
grooves on BOTTOM POLES (A) for
your lowest shelf.
TIP! Count the number of grooves
from the boom of the pole to keep
the height consistent.
A. Pairs of poles (4)
F. Small bin (12)
C. Wheels (2)
I. Label (30)
H. Extra-large bin (4)
2
STEP 3.
Fit SHELF (E) over the top of the 4 poles
and over SLIP SLEEVES (B).
Repeat STEPS 2-3 for next shelf.
TIP! If necessary, lightly tap shelves into
place with a rubber mallet.
STEP 4.
Screw PAIRS OF POLES (A) together.
STEP 5.
Repeat STEPS 2-3 for remaining shelves.
Set BINS (F, G, H) on shelves.
Congratulaons!
Enjoy your new bin rack organizer!