Seville Classics airLIFT OFF65807 User manual

Model #: OFF65807, OFF65808, OFF65840
OFF92008B, OFF92009B
V2020
Thank you for choosing Seville Classics! We hope that you enjoy your new sit-to-
stand desk. Please read through this user guide for parts list, instructions, frequently
asked questions, and contact information
052220052220
AIRLIFT® Gas-Spring
Standing Desk Converter

Parts List
A. AIRLIFT® Desk (1)
C. Tray (1)
D. Zip-Ties (2)
E. Allen Wrench (1)
F. Wire Clip (4)
G. Screws (6)
B. Brackets (2)
Please make sure you have all the parts on this list.
If you’re missing parts, contact us for replacements at [phone] or send an email to
[email protected]
Telephone: [phone]
Fax: [phone]
Hours: 8:30 AM – 4:30 PM (PST)
Email: [email protected]
Homepage: www.SevilleClassics.com
Dimensions: 35.43" W x 23.23" D x (6.25" to 19.1") H
Maximum weight on tray: 5 lbs. (2 kgs)
Maximum weight capacity overall: 33 lbs. (15 kgs)
FAQS
A. Yes! Be sure the desk is below it’s 33 lbs. maximum weight limit.
Q. What size is the base?
A. Base measures 32.75 inches wide and 22 inches deep.
Q. Do I need to plug it in?
2. Pull up on both AIRLIFT® levers and press down on desktop to lower.
Required Tools (not included)
Scissors
1 6

STEP 1. Remove AIRLIFT® DESK (A) from box and set on flat table.
STEP 2.
both sides of the
AIRLIFT® DESK (A).
STEP 3.
Flip TRAY (C) upside down.
BRACKETS (B) to underside of TRAY (C)
with SCREWS (G) and Allen Wrench (E).
Safety
DO NOT place devices on desk edge.
DO NOT
DO NOT route wires through desk legs.
MAKE SURE devices have cables long enough for
the full-range (15 in/38 cm) of height-adjustment.
Requires 2
personal injury.
2
5
A
C
G
B
E

3 4
STEP 5. Hook BRACKETS (B) over the bolts on the inner legs of the AIRLIFT® DESK (A).
Tighten bolts clockwise with included ALLEN WRENCH (E).
STEP 6. Place your belongings on the desktop to finish!
Organize loose cables
with included ZIP TIES (D).
ALWAYS route your cables through the REAR of the desk.
NEVER route cables through the legs of the desk.
Cable Management
WARNING:DO NOT PLACE HANDS ON
DESK LEGS. MOVING PARTS CAN CRUSH. monitors through the REAR of the desk.
STEP 4. Pull up on both AIRLIFT® levers and desktop to lift.
E
D