Seville Classics UltraHD ULTRAGUARD 16248 User manual

SC201204
ASSEMBLY INSTRUCTIONS
UltraHD® 24" D Tall Storage Cabinet (Model No. 16248)
36 in. W x 24 in. x 72 in. H
(91.4 cm x 60.9 cm x 1.83 m)
Reference page 12 for special care and
maintenance of stainless steel
Granite

1

(#1-A) Left Side Panel
(#2-A) Right Side Panel
(#6-A) Left Door
(#7-A) Right Door
#7-A1
#7-A3
#41 #53
#52
#6-A3
#7-A2
#52
#6-A3
#6-A2
#41
#6-A1
2

(#4) Bottom Panel x 1 PC
(#5) Middle Shelf x 3 PCS
PARTS LIST
(#1-A3) Side Panel Reinforcement Connection Part x 2 PCS
(#2-A1) Right Side - Upper Panel x 1 PC
(#1-A1) Left Side - Upper Panel x 1 PC
(#1-A2) Left Side - Bottom Panel x 1 PC
(#2-A2) Right Side - Bottom Panel x 1 PC
(#3) Top Panel x 1 PC
Please check the parts carefully according to the parts list. If you are missing any parts, please contact our
customer service department. (Please refer to page 13)
3

(#9) Middle Back Panel x 2 PCS
(#6-A1) Left Door - Upper Panel x 1 PC
(#6-A2) Left Door - Bottom Panel x 1 PC
(#6-A3) Door Panel Connection Part x 2 PCS
(#7-A2) Right Door - Bottom Panel x 1 PC
(#7-A3) Key Rod x 1 PC
(#8) Upper Back Panel x 1 PC
PARTS LIST
Please check the parts carefully according to the parts list. If you are missing any parts, please contact our
customer service department. (Please refer to page 13)
(#7-A1) Right Door - Upper Panel x 1 PC
4

(#17) Middle Corner Protection x 2 PCS
(#23) Magnet x 2 PCS
(#22) Key x 2 PCS
PARTS LIST
Please check the parts carefully according to the parts list. If you are missing any parts, please contact our
customer service department. (Please refer to page 13)
(#16) Corner Protection - B x 2 PCS
(#6) Leveling Feet x 4 PCS
(#34) HOOK x 12 PCS
(#10) Bottom Back Panel x 1 PC
(#15) Corner Protection - A x 2 PCS
5

(#41) Screw F (M4 x 8L) x 96 PCS
(#54) Screw N (M4 x 10L) x 28 PCS
(#52) Screw K (M5 x 10L) x 8 PCS
(#42) Screw G (M4 x 30L) x 16 PCS
(#53) Screw L (M4 x 6L) x 1 PC
(#55) Screw M (M6 x 50L) x 2 PCS
PARTS LIST
Please check the parts carefully according to the parts list. If you are missing any parts, please contact our
customer service department. (Please refer to page 13)
(#21) Screw Driver x 1 PC
(#25) Wrench x 1 PC
6

PARTS LIST
Please check the parts carefully according to the parts list. If you are missing any parts, please contact our
customer service department. (Please refer to page 13)
(#55-A) Wall Anchor x 2 PCS
(#27) WASHER (M4) x 2 PCS
(#60) Mounting Strap x 2 PCS
(#27-B) WASHER (M8)x 2 PCS
(#61) Screw O (M4 x 12L) x 2 PCS
M8X20 pcs
7

TIP:
WARNING:
Step 1: Install (#1-A) Left Side Panel.
Note:
Step 2: Install (#2-A) Right Side Panel.
Step 3: Install (#6-A) Left Door.
Note:
UltraHD® 24"D Tall Storage Cabinet (Model No. 16248)
*NOTE: We recommend using TWO people to assemble the cabinet.
Some parts may have sharp edges. To avoid injury,
wearing gloves is recommended during assembly.
This package contains an updated product
construction designed for easier transportation
while maintaining a rigid structure.
Maximum loading capacity is 600 LBS.
A magnetic screwdriver is included for your
convenience. If using a power screwdriver,
keep toruqe setting on LOW during assembly.
1). Place (#6-A1) Left Door - Upper Panel and (#6-A2)
Left Door - Bottom Panel together, line up screw
holes, use 1pc (#41) Screw F to tighten from the side.
2). Place the (#6-A3) Door Panel Connection Part over
the touching sides, line up the screw holes, use 4pcs
(#41) Screw F to tighten from the top, and use 4pcs
(#52) Screw K to tighten from outside edge.
Make sure the (#6-A1) Left Door - Upper Panel is
flushed with (#6-A2) Left Door - Bottom Panel.
Make sure the (#1-A1) Left Side Upper Panel is
flushed with (#1-A2) Left Side Bottom Panel.
Place the (#1-A1) Left Side - Upper Panel and (#1-A2)
Left Side Bottom Panel together, place the (#1-A3)
Side Panel Reinforcement Connection Part over the
touching edges, line up screw holes, use 4pcs (#42)
Screw G to tighten from the side, then use 6pcs of
(#41) Screw F to tighten from the top side.
Repeat Step 1,Place the (#2-A1) Right Side Upper
Panel and (#2-A2) Right Side Bottom Panel together,
place the (#1-A3) Side Panel Reinforcement
Connection Part over the touching edges, line up
screw holes, use 4pcs (#42) Screw G to tighten from
the side, then use 6pcs (#41) Screw F to tighten from
the top side.
8

Step 4: Install (#7-A) Right Door.
Note:
Step 5: Install (#7-A3) Key Rod.
Step 6: Install (#3) Top Panel to (#1-A1) Left Side Upper
Panel and (#2-A1) Right Side Upper Panel.
Note:
Step 7:
Bottom Panel and (#2-A2) Right Side Bottom Panel.
Note:
Repeat Step 3, use (#7-A1) Right Door - Upper Panel,
(#7-A2) Right Door - Bottom Panel, (#6-A3) Door Panel
Connection Part, use 1pc (#41) Screw F to tighten the
touching sides, use 4pcs (#41) Screw F to tighten from
the top touching side, and 4pcs (#52) Screw K to tighten
from outside edge.
Make sure the (#7-A1) Right Door - Upper Panel is
flushed with (#7-A2) Right Door - Bottom Panel.
Insert (#7-A3) Key Rod into the bottom tab hole of
(#7-A2) Right Door - Bottom Panel, twist out the
pre-assembled (#53) Screw L on the key rod linkage
plate, attach (#7-A3) Key Rod by lining up the screw hole
and tightening back in the (#53) Screw L.
Before tightening screws, make sure the bottom corners
of (#1-A1, #2-A1) Left Side Upper Panels are completely
flushed with the back and front corners of (#3) Top
Panel.
Before tightening screws, make sure the bottom corners
of (#1-A2, #2-A2) Left Side Bottom Panel and Right Side
Bottom Panels are completely flushed with the back and
front corners of (#4) Bottom Panel.
Attach (#3) Top Panel to (#1-A1) Left Side Upper Panel
and (#2-A1) Right Side Upper Panel. Make sure the front
of the panel faces downward. Line up screw holes, use
8pcs (#41) Screw F to tighten.
Install (#4) Bottom Panel to (#1-A2) Left Side
Attach (#4) Bottom Panel to (#1-A2) Left Side Bottom
Panel and (#2-A2) Right Side Bottom Panel. Make sure
the front of the bottom panel faces downward.
Line up screw holes, use 8pcs (#42) Screw G to tighten.
#53
#7-A3
#7-A1
#7-A2
#41
#41 #52
#6-A3
9
UltraHD® 24"D Tall Storage Cabinet (Model No. 16248)
*NOTE: We recommend using TWO people to assemble the cabinet.

Step 8: Install (#8, #9 and #10) Back Panels.
Step 9: Install (#6) Leveling Feet.
Step 10: Install (#15, #16 and #17) Corner Protections.
1). Attach (#10) Bottom Back Panel onto both
Bottom of Left and Right Side Panels (#1-A2 and
#2-A2) and Bottom Panel (#4), line up screw holes,
use 11pcs (#41) Screw F to tighten. Don't tighten
screws completely.
2). Attach both (#9) Middle Back Panel above
(#10) Bottom Back Panel the same way.
Place the groove of the (#9) Middle Back Panel
onto the top edge of the (#10) Bottom Back Panel,
line up screw holesuse onto the Left and Right
Side Panels (#1-A2 and #2-A2) ,use 12pcs (#41)
Screw F to tighten .Don't tighten screws
completely.
3). Attach both (#8) Upper Back panel onto both
Top of Left and Right Side Panels (#1-A2 and #2-
A2) and Top Panel (#3).Use 11pcs (#41) Screw F to
tighten.Then use 6pcs (#41) Screw F to tighten the
connection part of Upper /Middle/Bottom Back
panels. Tightening all screws step by step finally.
1). Attach 4pcs (#15, #16) Corner Protection A, B
onto Top of the cabinet, use 20pcs (#54) Screw N
to tighten.
2). Attach 2pcs (#17) Middle Corner Protection to
the middle of (#1-A) Left Side Panel and (#2-A)
Right Side Panel, use 8pcs (#54) Screw N to
tighten.
Use (#25) Wrench to install 4 pcs
(#6) Leveling Feet onto the (#4) Bottom panel.
Wheels are not included with this unit,
however there are 4 screw holes built into
(#4) Bottom Panel for installation. Wheels can
be purchased at www.SevilleClassics.com.
(Model #: WEB128)
See page 13 for installation instructions.
#6
#8
#9
#9
#10 #41
#2-A2 #4
10
UltraHD® 24"D Tall Storage Cabinet (Model No. 16248)
*NOTE: We recommend using TWO people to assemble the cabinet.

Step 11: Install (#23) Magnet.
Step 12: Install (#6-A, #7-A) Left and Right Doors.
Step 13: Install (#5) Middle Shelves.
Note: 150 lbs. maximum loading for each shelf.
Place (#23) Magnet onto (#3) Top Panel and
(#4) Bottom Panel facing the front, use 4pcs
(#41) Screw F to tighten.
1). Attach (#6-A) Left Door to (#1-A) Left Side
Panel, use 11pcs (#41) Screw F to tighten.
Note: The screw holes on the door hinge have
tolerance, enabling the door to be adjusted and
centered in the door frame. Place top, middle
and bottom Screws first. Don't tighten screws
completely - this may save time by avoiding
having to make slight adjustments for leveling
door panels later.
2). Install (#7-A) Right Door the same way.use
11pcs (#41) Screw F to tighten.
1). Decide the height for the each Middle Shelf
(#5). Place 12pcs of (#34) Hook into the hook
slot where each corner of shelf should be
placed. Make sure the hooks supporting each
shelf are at same height.
Note: All (#5) Middle Shelves need a hook at
each corner to support it.
2). Place each (#5) Middle Shelf into cabinet
and push down onto (#34) Hooks.
#34
#5
#41
#6-A
#7-A
11
UltraHD® 24"D Tall Storage Cabinet (Model No. 16248)
*NOTE: We recommend using TWO people to assemble the cabinet.

Step 14: Install Mounting Strap (#60)
UltraHD® Stainless Steel Care Instructions
• Lightly wipe with warm water and clean microfiber cloth
• Always wipe in the direction of the surface grain (NEVER ACROSS)
• Wipe away excess water with dry clean cloth
A. Remove 1pc Screw F (#41) from the back panel.
B. Attach the Mounting Strap (#60) to the back
panel as the left photo shows using Screw O (#61)
and Washer (#27).
C. Drill a hole in the wall with a 5/16" drill bit,
insert the Wall Anchor (#55-A) into the hole.
D. Attach the other end of the Mounting Strap
(#60) to the wall using Screw M (#55) and Washer
(#27-B).
Repeat steps A through D to install the other
mounting strap.
The stainless steel is protected with UltraGuard® fingerprint resistant finish.
DO NOT use traditional stainless-steel cleaners. To safely manage unwanted
fingerprints and prevent new stains, perform the following steps once monthly:
12
UltraHD® 24"D Tall Storage Cabinet (Model No. 16248)
*NOTE: We recommend using TWO people to assemble the cabinet.

13
UltraHD® 24"D Tall Storage Cabinet (Model No. 16248)
*NOTE: We recommend using TWO people to assemble the cabinet.
Installing Wheels (WEB128)* and Additional Shelves (UHD16248S)**
**Sold separately on SevilleClassics.com. Requires 2 pairs.
**Sold separately on SevilleClassics.com.
Installing Wheels
Step 1: Follow the previous instructions to Step 9.
DO NOT install Leveling Feet (#6).
Step 2: Install 2 pairs of wheels (WEB128) to the
bottom of the cabinet. Use screws included with
wheels to fasten.
Installing Additional Shelves
Step 1: Follow the previous instructions to Step 13.
Install additional shelves (UHD16248S)
the same way.
WEB128

Seville Classics, Inc.
19401 Harborgate Way Torrance, CA 90501 USA
Telephone: [phone] within USA
Fax: [phone]
Hours: 9:00am - 4:30pm (Pacific Standard Time)
E-mail: [e-mail]
Website & Online Store: www.sevilleclassics.com
UltraHD® Tall Storage Cabinet UltraHD® Mega Storage Cabinet
Model No. 16236 (Granite) Model No. 16238 (Granite)
Model No. 20143 (Graphite)
Model No. 20148 (Graphite)
Model No. 20153 (Red) Model No. 20158 (Red)
Model No. 20133 (White)
CONTACT INFORMATION
If you are missing any parts, have any questions, or need additional assistance in assembly, please contact our
bilingual (English and Spanish) customer service department at:
***Please visit our website or call and inquire about our additional UltraHD Line***
UltraHD® Line
14

UltraHD® 4-Drawer Rolling Cabinet UltraHD® 6-Foot Height Adjustable Workbench
Model No. 20205 (Granite)
Model No. 20292 (Granite)
UltraHD® Wall Cabinet with Open Shelf UltraHD® 2-Door Rolling Workbench
Model No. 20230 (Granite) Model No. 20262 (Granite)
Model No. 20140 (Graphite) Model No. 20142 (Graphite)
Model No. 20150 (Red) Model No. 20152 (Red)
UltraHD® Rolling Trash Bin UltraHD® Lighted Workcenter
Model No. 20215
Model No. 20247 (Granite)
Model No. 20246 (Graphite)
Model No. 20157 (Red)
UltraHD® Line