Seville Classics Airlift OFF42631 User manual


Lock casters to prevent the table from rolling.

To lower, pull up on the adjustment lever while
pressing down on the table top.
Release adjustment lever to lock in height.
Safety
Do not place more than 35 lbs. on the desk top.
Telephone: [phone]
Fax: [phone]
Hours: 8:30 AM – 4:30 PM (PST)
Email: [e-mail]
Homepage: www.SevilleClassics.com
062019
STEP 5.
Align holes on BASE (D) with
COLUMN (A) making sure holes
for feet face upward.
LONG BOLTS (G)
through TOOTH WASHERS (J)
using 5 MM HEX KEY (N).
STEP 6.
Install LOCKING CASTERS (F) to
the open end of BASE (D) with
WRENCH (L).
Repeat for CASTERS (E) on the
opposite side.
Mobile Desk Cart!
Model: OFF42631
Thank you for choosing Seville Classics! We hope that you enjoy your new
mobile desk cart. Please read through this user guide for parts list, assembly
062019
-Stand Mobile
Laptop Computer Desk Cart

Parts List
A. Column (1)
Please make sure you have all the parts on this list.
If you’re missing parts, contact us for replacements at
[phone] or send an email to [e-mail]
1
B. Mount (1)
H. Short bolt (11)
I. Screw (2)
C. Top (1)
D. Base (1)
E. Caster (2)
F. Locking caster (2)
G. Long Bolt (4)
J. Tooth washer (4)
K. Clip (1)
L. Wrench (1)
M. 4mm Hex key (1)
N. 5mm Hex Key (1)
4 mm
5 mm
2
STEP 1.
Remove cap from COLUMN (A).
STEP 2.
Align holes on MOUNT (B) with
top of COLUMN (A).
Attach with SHORT BOLTS (H)
using 4 MM HEX KEY (M).
STEP 3.
Attach CLIP (K) to underside of
TOP (C)with SCREWS (I).
TIP! Place desk top on soft
surface like carpet when
assembling to prevent damage
to the surface.
STEP 4.
Align column assembly with
holes on rear of TOP(C).
IMPORTANT: Make sure the
orange arrows match,andthe
lever fits into the CLIP (K).
Attach with SHORT BOLTS (H)
using 4 MM HEX KEY (M).