Crosley CF91007-504 User manual

Queen Canopy Bed
CF91007-504

PART LIST
A
Headboard Panel
1 PC
B
Footboard Panel
1 PC
C
Leg Extension
2 PCS
D
Finial
4 PCS
E
Footboard Post
2 PCS
F
Headboard Post
2 PCS
G
Long Canopy Pole
2 PCS
H
Short Canopy Pole
2 PCS
I
Side Rail
2 PCS
J
Slat
4 PCS
K
Support Leg
4 PCS
HARDWARE LIST
#1
Bolt
12 PCS (Extra 1)
1/4" x 5/8"L
#2
Medium Bolt
4 PCS (Extra 1)
1/4" x 3/4"L
#3
Sunk Bolt
4 PCS (Extra 1)
1/4" x 1-7/8"L
#4
Hex Nut
12 PCS (Extra 1)
1/4"
#5
Flat Washer
20 PCS (Extra 1)
Ø16xØ6.5x1MM
#6 #7 #8
Allen Wrench
1 PC
Wrench
1 PC
Long Bolt
4 PCS (Extra 1)
1/4" x 1-1/2"L
2

Step 1. Lay headboard panel (part A) upside down on a soft flat surface, such as carpet, as shown
below. Attach leg extensions (part C) to headboard panel (part A) using bolts (part #1),
flat washers (part #6) and allen wrench (part #7).
NOTE: Please do not fully tighten bolts until unit is fully assembled.

Step 2. Carefully turn assembled unit (parts A & C) upright. Attach side rails (part I) to leg extensions
(part C) using sunk bolts (part #4), hex nuts (part #5), allen wrench (part #7) and wrench (part #8).
See Figure 1. Attach side rails (part I) to footboard panel (part B) using medium bolts (part #2), flat
washers (part #6) and allen wrench (part #7). See Figure 2.
NOTE: Please do not fully tighten bolts until unit is fully assembled.
#7 x1
#7
#1
#6
A
C
A
C
C
#7
#4
#5
#7
#2 B
#8 x1
#8
#2 x4
#6
#6
#1
x4
x4
#7
#5
#6
#4
x1
x4
x4
x4
I
I
3
A
C
I
B
Figure 1
Figure 2

Step 4. Attach assembled units (parts J & K) to side rails (part I) using bolts (part #1), flat washers
(part #6), hex nuts (part #5), allen wrench (part #7) and wrench (part #8).
NOTE: Please fully tighten all bolts at this time.

Step 5. Screw finials (part D) on headboard panel (part A) and footboard panel (part B) by hand.
#7 x1
#6
#5
x8
x8
#7
#3
x1
x4
#1 x8
x1
#8
#1
#6
#5
#8
#7
J
I
#3
#7
J
K
D
A & B
Step 3. Attach support legs (part K) to the bottom of slats (part J) using long bolts (part #3),
flat washers (part #6) and allen wrench (part #7).

#6
#6 x4
4
J
K
K
J
I
D
A
B

D
G
H
E & F
Step 7. Insert headboard posts (part F) onto headboard panel (part A) and footboard posts (part E) onto
footboard panel (part B).

E & F
A & B
Canopy Assembly:
Step 6. Remove finials (part D) from headboard panel (part A) and footboard panel (part B) by hand.
Carefully line up holes on long canopy poles (part G) and short canopy poles (part H) to
footboard posts (part E ) and headboard posts (part F) and secure with finials (part D).

5
D
G
H
EF
F
A
B
E