SHANGRI-LA SLCLAI2DCCA User manual

SET OF 2 CLAIR
DINING CHAIRS
SLCLAI2DCCA, SLCLAI2DCNA, SLCLAI2DCOA, SLCLAI2DCBA, SLCLAI2DCFA

Hardware
A35mm M6 screw (x4) B30mm M6 screw (x2) C25mm M6 screw (x2)
D20mm M6 screw (x4) EWasher (x4) FAllen key (x1)
COMPONENTS
1
3
3
2
4

Step 1: Using the Allen key (F), secure the back frame (3) onto chair seat (2) with 35mm M6
screws (A).
Using the Allen key (F), secure the other end of the back frame (3) onto the chair back (1)
with the 30mm and 25mm M6 screws (B, C) as shown below.
A(x4)
B(x2)
C(x2)
F(x1)
ASSEMBLY
Notes:
•Do not use power tools to assemble this chair as this may cause damage to the
components.
•Do not fully tighten the screws. They should be tightened to around 80% of the
way.
F
A
80%
2
3
1
F
B
80%
F
C
80%
3

Step 2: Align the holes on the leg frame (4) with those on the chair seat (2). Place a washer
(E) over one of the aligned holes, then using the Allen key (F), secure the washer (E) with a
20mm M6 screw (D). Repeat this process with the three remaining aligned holes.
D(x4)
E(x4)
F(x1)
F
D
E
4
2