SHANGRI-LA RIO ENTERTAINMENT UNIT SLRIOENTUOA User manual

RIO ENTERTAINMENT UNIT
SLRIOENTUOA & SLRIOENTUWA

Parts list
NO
SIZE
CARTON NO.
NO
SIZE
CARTON NO.
1
396x396x16 (x2)
2-2
7
1778x328x5 (x1)
2-1
2
1768x379x16 (x1)
2-1
8
396x197x16 (x1)
2-2
3
1768x396x16 (x1)
2-1
9
396x197x16 (x1)
2-2
4
353x379x16 (x1)
2-2
10
396x465x16 (x2)
2-2
5
353x379x16 (x1)
2-2
11
396x465x16 (x1)
2-2
6
1768x60x16 (x1)
2-1
COMPONENTS

Hardware
ACam Bolt (x26)
B Cam Connector (x26)
CDowel (x24)
DM7x50mm Bolt (x3)
EAllen Key
FM6x25 Screw (x2)
GM6x30 (x11)
H M6x16 (x2)
I Flat Hinge
(x4)
J Bent Hinge
(x2)
Note:
This product includes two different types of hinges. Ensure the correct ones are
used during assembly.

Step 1:
Attach the two legs (1) &(2) to the centre support (3) using the four M6x30 Screws (G).
E Allen Key
GM6x30 (x4)
ASSEMBLY

Step 2:
Attach the centre leg (4) to the centre support (3) using the two M6x16 Screws (H).
E Allen Key
HM6x16 (x2)

Step 3:
Insert eight Cam Bolts (A) and eight Dowels (C) into parts (2) & (3) in the locations shown
below.
Important: Ensure the Dowels (C) are placed in the inner holes and the Cam Bolts (A) are
in the outer holes.
A Cam Bolt (x8)
CDowel (x8)

Step 4:
• Insert eight Cam Connectors (B) into all the holes adjacent to the corresponding Cam
Bolts.
Note: Ensure the arrow on the Cam Connector (B) is facing the direction of the hole.
• Attach parts (2), (3), (4) &(5)together by screwing the Cam Connectors (B) clockwise.
BCam Connector (x8)

Step 5:
Insert 10 Cam Bolts (A) and 10 Dowels (C) into parts (1L)& (1R)in the locations shown below.
A Cam Bolt (x10)
CDowel (x10)

Step 6:
• Insert 10 Cam Connectors (B) into all the holes adjacent to the corresponding Cam
Bolts.
Note: Ensure the arrow on the Cam Connector (B) is facing the direction of the hole.
• Attach parts (1L), (1R),(6) & (7) to the assembled frame by screwing the Cam
Connectors (B) clockwise.
BCam Connector (x10)

Step 7:
• Secure the two Flat Hinges (H) to parts (8) & (10)using the included hinge fasteners.
IMPORTANT:Ensure only the Flat Hinges (I) are used in this step. The Bent Hinges (J)
will not fit.
• Repeat with parts (9) and (11).
I Flat Hinge (x4)

Step 9:
• Insert eight Cam Bolts (A) and six Dowels (C) into parts (8) & (9) in the locations shown
below.
• Insert eight Cam Connectors (B) into all the holes adjacent to the corresponding Cam
Bolt (A).
Note: Ensure the arrow on the Cam Connector (B) is facing the direction of the hole.
• Secure parts (8) & (9) to the entertainment unit assembly by screwing the Cam
Connectors (B) clockwise.
ACam Bolt (x8)
BCam Connector (x8)
CDowel (x6)

Step 10:
Secure the legs to the underside of the entertainment unit using the seven M6x30 Hex
Screws (G).
G M6x30mm Hex Screw (x7)

Step 11:
Secure the legs in place using the two M6x25 Screws (F) from inside the entertainment unit.
FM6x25 Screw (x2)

Step 12:
Insert the three M7x50 Screws (D) in the rear of the entertainment unit.
DM7x50mm Screw (x3)

Step 13:
Secure part (10) to the entertainment unit assembly using the two Bent Hinges (J) and the
included hinge fasteners.
JBent Hinges (x2)

Adjustments
Assembly Completed
Adjust door up and
down using screw A
Adjust door left and
right using screw B
Adjust door and back
using screw C

NOTES

Need more information?
We hope that this user guide has given you
the assistance needed for a simple set-up.
For the most up-to-date guide for your product,
as well as any additional assistance you may require,
head online to help.kogan.com