SHANGRI-LA MARRAKESH SLMARRAKBFA User manual

MARRAKESH
BUFFET/SIDEBOARD
SLMARRAKBFA

COMPONENTS

Hardware
A(x14)
B(x8)
C(x8)
D(x8)
E(x2)
F(x6)
G(x2)
H(x40)
I(x8)
J(x3)
K(x2)
L(x32)
M(x8)
N(x8)

Step 1:
C(x6)
G(x2)
H (x4)
K(x2)
L(x2)
ASSEMBLY
Note:
A Phillips head screwdriver (not supplied) will be required to assemble this
buffet/sideboard.

Step 2:
C(x2)
Step 3: Insert two dowels (A) into the upper holes into the part 12, then secure two cam
locks (D) into part 12.
Align parts 3and 5with part 12. Ensuring the arrows on the cam locks (D) are pointing
towards the corresponding cam screws (C), use a Phillips head screwdriver to secure the
cam locks (D) to the cam screws (C) to connect part 12 to parts 3and 5.
A(x2)
D(x2)

Step 4:
A(x6)
B(x6)
Step 5:
L(x24)

Step 6:
Step 7:
A(x6)
D(x6)

Step 8:
M(x8)
N(x8)
Step 9:
F(x6)
H(x12)
J (x3)
L(x6)

Step 10: Use a Phillips head screwdriver to secure each hinge (F) with four screws (H).
If the doors (13, 14) are uneven, or if there is a gap between the doors (13, 14) and assembly,
loosen the screws (H) slightly and adjust the hinges (F) until they are flush with the
assembly.
H(x24)
Step 11: Twist the adjusters on the legs (9) to ensure the assembly is level and stable.

Step 12: Align the brackets (K) with where you would like to place the buffet/sideboard
against the wall. Mark the location of the brackets (K) on the wall. Using a drill (not
supplied), make holes on the marked spots. With a hammer (not supplied), secure the wall
anchors (E) into the holes.
Align the brackets (K) with the wall anchors (E), then use a Phillips head screwdriver to
secure two screws (B) through the components (K, E).
B(x2)
E(x2)
TOPPLING FURNITURE WARNING:
•It is strongly recommended that this product is permanently fixed to the wall.
•Please seek professional advice if you are in doubt of what fixing device to use.
•Regularly check that anchors are securely maintained.
•Stability of tall items may be affected by thick carpets or uneven floors.
•Do not place unanchored televisions on furniture.
Caution! For your safety when attaching the anchor fixings, please note the following:
Check any electrical wires or plumbing inside the wall before drilling any holes (if you
are unsure, please seek professional advice from a qualified tradesperson).

Step 13:
H(x24)

Assembly is complete.

NOTES

Need more information?
We hope that this user guide has given you
the assistance needed for a simple set-up.
For the most up-to-date guide for your product,
as well as any additional assistance you may require,
head online to help.kogan.com