SHANGRI-LA RIO SLRIOCOFTOA User manual

RIO COFFEE TABLE
SLRIOCOFTOA SLRIOCOFTWA

Parts list
NO
SIZE
CTN NO.
NO
SIZE
CTN NO.
1
1168x650x16 (x1)
2-1
7
802x220x16 (x2)
2-1
2
1168x650x16 (x1)
2-1
8
300x150x12 (x4)
2-2
3
220x650x16 (x2)
2-2
9
738x150x12 (2)
2-1
4
648x181x16 (2)
2-2
10
284x60x12 (x2)
2-2
5
220x197x16 (x2)
2-2
11
748x294x5 (x2)
2-1
6
220x197x16 (x2)
2-2
12
500x30x16 (x4)
2-1
COMPONENTS

Hardware
ACam Bolt (x28)
B Cam Connector (x28)
CDowel (x16)
DM7x50mm Bolt (x4)
E Allen Key
FM6x25 Screw (x4)
GM6x30 Screw (x10)
H M4x14 Screw (x16)
I M4x30 Screw (x8)
JCam Bolt & Connector
(small) (x10 sets)
KM4x14 Screw
(Black) (x24)
L M4x30Screw (x12)
M Drawer Slides (x4 sets)
NL-Bracket (x4)

Step 1:
Attach the two legs (1) to the centre support (2) using the four M6x30 Screws (G).
E Allen Key
GM6x30 Screw (x4)
ASSEMBLY

Step 2:
• Attach two pieces of part (12) to part (1) using four M4x30 Screws (I).
• Repeat for part (2).
IM4x30 Screws (x8)

Step 3:
Insert eight Cam Bolts (A) and eight Dowels (C) into parts (3L) & (3R)in the locations
shown below.
A Cam Bolt (x8)
CDowel (x8)

Step 4:
• Insert eight Cam Connectors (B) into all the holes adjacent to the corresponding Cam
Bolts.
Note: Ensure the arrow on the Cam Connector (B) is facing the direction of the hole.
• Attach parts (1), (2) & (3L & 3R)together by screwing the Cam Connectors (B)
clockwise.
BCam Connector (x8)

Step 5:
• Separate each Drawer Slides (M) into two pieces.
• Attach the four outer pieces of the Drawer Slides (M’), to the inner surfaces of parts (4)
using 12 M4x14 Screws (K).
MDrawer Slides (x4 sets)
KM4x14 Screw (Black) (x12)

Step 6:
Insert 16 Cam Bolts (A) and Eight Dowels (C) into parts (6) & (5) in the locations shown
below.
A Cam Bolt (x16)
CDowel (x8)

Step 7:
• Insert 16 Cam Connectors (B) into all the holes adjacent to the corresponding Cam
Bolts.
Note: Ensure the arrow on the Cam Connector (B) is facing the direction of the hole.
• Attach parts (1), (5) & (6) to the coffee table assembly by screwing the Cam Connectors
(B) clockwise.
BCam Connector (x16)

Step 8:
Secure the legs to the underside of the coffee table assembly using the six M6x30 Screws
(G).
GM6x30 Screw (x6)

Step 9:
Secure the legs in place using two M6x25 Screws (F) from inside the coffee table.
FM6x25 Screw (x2)

Step 10:
Insert x2 part (4) into the table assembly making sure the drawer slides are facing inwards.

Step 10:
• Secure x2 part (4) to the table assembly using the L-Brackets (N) and the 16 M4x14
Screws (H).
• Insert four M7x50 Screws (D) from underneath the table assembly.
N L-Bracket (x4)
HM4x14 Screw (x16)
DM7x50 Screw (x4)

Step 11:
• Attach parts (8L)& (8R) to part (9) using four M4x30 Screws (L).
• Slide part (11) into the groove on the drawer assembly and place part (10) behind it.
• Repeat for the remaining drawer.
L M4x30 Screw (x4)

Step 12:
• Insert five Cam Bolts (J) into part (7) in the locations shown below.
• Insert five Cam Connectors (J) into all the holes in the drawer assembly adjacent to the
corresponding Cam Bolt.
Note: Ensure the arrow on the Cam Connector (J) is facing the direction of the hole.
• Secure the drawer assembly together by screwing the Cam Connectors (J) clockwise.
• Repeat for the remaining drawer.
JCam Bolt & Connector
(x10 sets)

Step 13:
• Attach two inner pieces of the Drawer Slides (M”) to the drawer assembly using four
M4x14 Screws (K).
• Repeat for the remaining drawer.
MDrawer Slides (x4 sets)
K M4x14 Screws (Black) (x8)

Step 14:
Insert the two drawers into the coffee table.
Assembly Completed

Need more information?
We hope that this user guide has given you
the assistance needed for a simple set-up.
For the most up-to-date guide for your product,
as well as any additional assistance you may require,
head online to help.kogan.com