Shanty 2 CHIC Media Console Table User manual

Media Console Table
sleek, modern take on a traditional concept; this console table is as
stylish as it is functional and you'll have it done in a weekend. And versatile enough
to be painted for any room in your home.
A
Copyright © 2016 Shanty-2-Chic.com
17"72"
38"
FRONT SIDE

media Console Table - Page | 2SHanty-2-Chic.com
72"
25 ¾"
16"
16"
16"
16"
16"
34 7/8"
72"
37 ¼"
¾" x 48" x 96"
plywood
¾" x 48" x 96"
plywood
¼" x 48" x 96"
plywood
CUT LIST
NOTE
To make it easier to
transport home ask
that they rip both
sheets down to 16"
strips.
Make sure you read through the instructions carefully and take notice of any special
construction notes prior to making any cuts. And always practice safe DIY’ing. Have fun!
PLEASE NOTE - many pieces may require you to cut them to t a certain size
while you are building it. Its best not to cut pieces until you need them. Take
your time and study all the diagrams.

media Console Table - Page | 3SHanty-2-Chic.com
10 3/8"
23 ¼"
31 ¼"
34 ½"
65"
38"
15 3/8"
23 ¼"
½" x 24" x 48"
MDF
½" x 24" x 24"
MDF
CUT LIST
Make sure you read through the instructions carefully and take notice of any special
construction notes prior to making any cuts. And always practice safe DIY’ing. Have fun!
PLEASE NOTE - many pieces may require you to cut them to t a certain size
while you are building it. Its best not to cut pieces until you need them. Take
your time and study all the diagrams.
1" x 4" x 8'
1" x 4" x 6'
1" x 3" x 6'
1" x 2" x 6'
1" x 2" x 6'
¼" x 3" x 48"
¼" x 3" x 48"
¼" x 3" x 48"
¼" x 3" x 48"
¼" x 3" x 48"
¼" x 3" x 48"

media Console Table - Page | 4SHanty-2-Chic.com
Material Qty
¾” x 48" x 96” plywood 2
¼” x 48" x 96” plywood 1
½” x 24" x 48” MDF 1
½” x 24" x 24” MDF 1
1” x 4” x 8’ pine board 1
1” x 4” x 6’ pine board 1
1” x 3” x 6’ pine board 1
1” x 2” x 6’ pine board 2
¼” x 3” x 48" pine board 6
NOTES
MATERIALS LIST
Material Qty
1-¼” pocket screws
1-¼” brad nails
½” brad nails
¾” staples
wood glue
Hinges 4
Door pulls 4

media Console Table - Page | 5SHanty-2-Chic.com
1
16"
16"
16"
16"
2 ¾"
24 ¼"
8 ¾"
34 7/8"
34 7/8"
2
31 ¼" 31 ¼"
3 ½"
6"
1 ½"
23 ½"
1 ½"
2" 3 ½" 2 ½" 3 ½"
34 ½"
3
16"
37 ¼"
16"
16"
16"
37 7/8"
37 7/8"
1.
After cutting all the 16" strips of plywood to the various lengths
drill ¾" pocket holes into one end of the 37 ¼" long side panels.
Attach to the 72" long top panel with wood glue and 1-¼"
pocket screws as shown, making sure the outside edges are ush.
For reference, currently the console table is shown upside down.
2.
Next you will attach the shelves. Drill ¾" pocket holes into both
ends of all shelves. Attach to the carcass with wood glue and
1-¼" pocket screws; spaced as shown with pocket holes facing
up.
Flip the console right-side up. Fill in any pocket holes you may
see with wood ller. Fill the outside exposed edges of the top ¾"
plywood with wood ller. Allow to dry and sand smooth.
3.
Now for the face frame. Cut your 1x4, 1x3 and 1x2 boards to length
as shown. Make sure to double check the size of the carcass in Step
2. Your face frame should line up exactly with the outside edges.
Make any adjustments to your lengths prior to cutting.
Drill ¾" pocket holes into the ends of the boards as shown.
Attach with wood glue and 1-¼" pocket screws; spaced as
shown.
X 6

media Console Table - Page | 6SHanty-2-Chic.com
5
6
4.
Attach face frame with wood glue and 1-¼" brad nails, making
sure the outside edges and the shelf edges are flush.
Fill any nail holes with wood filler. Allow to dry and sand
smooth.
Prime and paint your console table. Allow to dry.
5.
Cut the ¼" plywood back to t ush with the outside edges of
the console table and ush with the top edge of the top shelves
and the bottom edge of the bottom shelves. Sand and paint.
Allow to dry.
Attach to the back of your console table with ¾" staples.
6.
Now for the four doors. Measure the openings in the lower half
of the console table. You want a 1/8" gap all around the doors.
The above measurements should be close but make sure to cut
your ½" MDF to t properly.
Cut your decorative door stiles and rails to length and attach
with wood glue and ½" brad nails as shown. Repeat for a total
of four doors.
Fill any nail holes with wood filler. Allow to dry and sand
smooth.
Prime and paint the doors. Allow to dry.
4
25 ¾"
25 ¾"
23 ¼"
½"
¼"
15 3/8"
10 3/8"
X 4

media Console Table - Page | 7SHanty-2-Chic.com
7
7.
Finally, attach the doors with hinges. Attach your door pulls.
Place in your room and enjoy!!