Shark S1000 Series User manual

Steam Mop
S1000 and S1200
Series
OWNER’S GUIDE

11-800-798-7398
THANK YOU
for purchasing the Shark® Steam Mop.
PLEASE READ CAREFULLY AND KEEP FOR FUTURE
REFERENCE.
This instruction manual is designed to help you get
a complete understanding of your new Shark Steam
Mop.
If you have any questions, please call the Customer
Service line at 1-800-798-7398.
TECHNICAL SPECIFICATIONS
Voltage: 120V., 60Hz
Watts: 1050W
Water Capacity: 375 ml (12.6 fl. oz.)
TIP: You can locate
the date code on one
of the prongs of the
power cordplug.
TIP: The QR Code can
be found on the back
panel of the Steam
Mop. RECORD THIS INFORMATION
Model Number: ������������������������������
Date Code: ����������������������������������
Date of Purchase (Keep receipt): ����������������
Store of Purchase: ����������������������������
REGISTER YOUR PURCHASE
registeryourshark.com
1-800-798-7398
Scan QR code using mobile device

2sharkclean.com
CONTENTS
Important Safety Instructions. . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Getting To Know Your Shark® Steam Mop. . . . . . . . . . . . . . . . . 5
Assembling Your Steam Mop . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Using Your Steam Mop . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
To Sanitize with Your Steam Mop . . . . . . . . . . . . . . . . . . . . . . . . . .10
Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Maintaining Your Steam Mop . . . . . . . . . . . . . . . . . . . . . . . . . . 12
After Use and Storage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12
Troubleshooting Guide. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

31-800-798-7398
DANGER OF SCALDING: THE
STEAM EMITTED FROM THE STEAM
MOP IS VERY HOT AND MAY CAUSE
SCALDING. PLEASE USE CAUTION
WHEN USING THE STEAM MOP.
1Keep Steam Mop away from
children.
2When in use, NEVER turn the Steam
Mop over on its side or direct steam
toward people, pets, or plants.
3 Use the system O NLY for its
intended purpose.
4DO NOT use for space-heating.
5DO NOT use outdoors.
6DO NOT leave the Steam Mop
unattended when plugged in.
ALWAYS unplug the power cord
from the electrical outlet when not in
use and beforeservicing.
7DO NOT allow the Steam Mop to be
used by children. Close attention is
necessary when used near children,
pets, or plants.
8Use ONLY as described in this
instruction manual.
9Use ONLY manufacturer’s
recommended accessories.
10 DO NOT use with damaged cord
or plug. If the Steam Mop is not
working as it should or has been
dropped, damaged, left outdoors,
or immersed in water, return it
to SharkNinja Operating LLC for
examination and repair. Incorrect
reassembly or repair can cause a risk
of electrical shock or injury when the
Steam Mop is used.
11 To protect against a risk of electric
shock, DO NOT immerse the Steam
Mop in water or any other liquid.
12 DO NOT handle the plug or Steam
Mop with wet hands or operate it
without wearing shoes.
13 DO NOT pull or carry by cord, use
cord as a handle, close a door on
cord, or pull cord around sharp
edges or corners. DO NOT run
Steam Mop over cord. Keep cord
away from heated surfaces.
14 DO NOT unplug by pulling on
power cord. To unplug, grasp the
plug, not the power cord. DO NOT
use extension cords or outlets
with inadequate current-carrying
capacity.
IMPORTANT SAFETY INSTRUCTIONS
FOR HOUSEHOLD USE ONLY
WARNING
To reduce the risk of injury, fire, electric shock, and property damage
resulting from improper use of the appliance, carefully observe the following
instructions. This unit contains electrical connections and moving parts that
potentially present risk to the user.

4sharkclean.com
15 DO NOT put any objects into the
steam nozzle openings. Discontinue
use if the steam nozzle is blocked.
16 DO NOT put hands or feet under the
Steam Mop. It gets very hot.
17 Use ONLY on flat, horizontal
surfaces. DO NOT use on walls,
counters, or windows.
18 DO NOT use on leather, wax-
polished furniture, synthetic fabrics,
velvet, or other delicate, steam-
sensitive materials.
19 DO NOT add cleaning solutions,
vinegar, scented perfumes, oils, or
any other chemicals to the water
used in the Steam Mop as this may
damage it or make it unsafe for use.
If you live in a hard-water area, we
recommend using distilled water in
your Steam Mop.
20 NEVER store or leave Steam Mop
in one spot with Dirt Grip® pad
attached, as this may damage
surfaces.
21 Before removing Dirt Grip pad,
unplug the Steam Mop and allow it
to cool.
22 Unplug the Steam Mop before
cleaning. Use a dry or damp cloth
to clean the exterior. DO NOT pour
water on Steam Mop, or use alcohol,
benzene, or paint thinner to clean.
23 Extreme caution should be exercised
when using the Steam Mop to clean
stairs.
24 NEVER use Steam Mop without the
Dirt Grip pad attached.
25 Keep your work area well lit.
26 Store Steam Mop indoors in a cool,
dry place.
27 To avoid circuit overload, DO NOT
operate another appliance on the
same socket (circuit) as the Steam
Mop.
28 To avoid scalding injuries, ALWAYS
unplug the Steam Mop and allow it
to cool before removing or changing
mop heads, accessories, or Dirt Grip
pads.
29 Your Steam Mop is designed to
clean hard floor surfaces that will
withstand high heat. DO NOT use
on unsealed wood or unglazed
ceramic floors. On surfaces that
have been treated with wax and on
some no-wax floors, the sheen may
be removed by the heat and steam
action. We recommend testing an
isolated area of the surface to be
cleaned before proceeding. We also
recommend that you check the use
and care instructions from the floor
manufacturer.
POLARIZED PLUG
To reduce the risk of electric shock,
this Steam Mop has a polarized plug
(one blade is wider than the other). As
a safety feature, this plug will fit into a
polarized outlet ONLY one way. If the
plug does not fit fully into the outlet,
reverse the plug. If it still does not fit,
contact a qualified electrician. DO NOT
force into outlet or try to modify to fit.
SAVE THESE INSTRUCTIONS
PLEASE READ CAREFULLY BEFORE USE

51-800-798-7398
GETTING TO KNOW YOUR
SHARK® STEAM MOP
WELCOME!
Congratulations
on your purchase.
Use this instruction
manual to learn about
your new Steam
Mop’s great features.
From assembly to use
to maintenance, you
will find it all in here.
NOTE: When assembling
your Steam Mop there
may be a little water
in or around the water
tank. This is because we
thoroughly test all of our
Steam Mops before you
buy them, so you get a
quality Shark* Steam Mop.
MAIN UNIT
ASteam Mop Handle
BUpper Cord Wrap
CPole
DLower Cord Wrap
ERemovable Water Tank
FWater Tank Cap
GSteam Mop Body
HMop Head
IDirt Grip® Pad
H
A
G
B
D
F
I
E
C

6sharkclean.com
ASSEMBLING YOUR
STEAM MOP
WARNING: ALWAYS
make sure the Steam
Mop is UNPLUGGED
when not in use.
NEVER fill the
Steam Mop when it
is plugged into an
electrical outlet.
Unplug from the
electrical outlet and
allow the unit to cool
before you fill the
water tank, or attach
or remove the mop
head. Make sure you
add only water to
the tank. Chemicals
or cleaning solutions
(including vinegar)
may damage the
Steam Mop and could
be unsafe for you and
your family.
1Align the mop handle and mop pole so the arrow
symbols inside them face forward. Insert either end
of the pole into the handle until it clicks securely
into place.
2Align the assembled steam mop pole and the
steam mop body so their arrow symbols both face
forward. Insert the pole into the top of the mop
body, sliding it in until it clicks into place.
3Place the Dirt Grip® cleaning pad on the floor with
the quick fastener strips facing up. Align the mop
head directly over the pad, then press the mop
head down onto the pad. The quick fastener strips
will secure the pad to the mop head.
STEP 1
STEP 2
STEP 3

71-800-798-7398
USING YOUR STEAM MOP
1To remove the tank, lift
it up and away from
the Steam Mop body.
Make sure to unplug
the Steam Mop before
removing the water
tank.
2To remove the water
tank cap, twist
counterclockwise. Fill
tank completely with
distilled water or tap
water.
CAUTION: DO NOT
scrub any one area for
an extended period.
IMPORTANT: Before
you fill up the water
tank, make sure
your Steam Mop is
unplugged from the
electrical outlet.
IMPORTANT: Make
sure you DO NOT use
the Shark®Steam Mop
without first attaching
a Dirt Grip® pad and
filling the tank with
water.
NOTE: To prolong the life
of your Steam Mop, we
recommend using distilled
water.
NOTE: Sweep or vacuum
your floors prior to
cleaning with your Steam
Mop.
NOTE: Please wait 2 to
3 minutes for the Steam
Mop to cool o before
removing the Dirt Grip
pad. NEVER leave the
Steam Mop with a damp
or wet Dirt Grip pad on
any floor for an extended
period.
STEP 1 STEP 2

8sharkclean.com
3Replace cap on water tank and turn
cap clockwise to seal.
4 To replace the water tank, align it so
the cap faces down. Place the cap
into the hole in the Steam Mop body
and slide tank down until it clicks
securely into place.
STEP 4STEP 3

91-800-798-7398
USING YOUR STEAM MOP - CONT.
1 Pull and twist the quick release cord holder to
unwrap the power cord completely. When Steam
Mop is plugged into an electrical outlet, the power
light will illuminate. It takes approximately 30
seconds for the mop to heat up and the steam to
be ready.
2 Pump the handle a few times in a downward
motion. This pumping action will release steam as
you mop and allows you to customize the amount
of steam you want. Begin mopping with a forward
and backward motion. The natural motion of
mopping will produce steam.