Sharp MX-M200D User manual

M X - M 2 0 0 D
CONFIGURATION GUIDE
MX-M200D
Base Model
Plus Options
MX-M200D
Options
MX-M200D
Base Model
Includes 40-Sheet RSPF
(Reversing Single Pass Feeder)
OR
AND
AND
AR-D34
250-Sheet Paper Feed Unit
AR-D35
250-Sheet x 2 Paper Feed Unit
AR-55ABDH
(Deluxe High Cabinet)
AR-55ABDL
(Deluxe Low Cabinet)
MX-FX10
Fax Expansion Kit
MX-NB10
Network Expansion Kit
with PCL®6 Network Printing
and Network Scanning
MX-TR10
Job Separator Tray
AR-MM9
8 MB Memory Expansion
MX-FX10
SHP32X64S133C3-B
256 MB MFP
Memory Expansion
SHP32X64S133SC3-B
256 MB Memory Expansion
MX-NB10
MX-PK10
Postscript PS3 Expansion Kit
(Requires MX-NB10)

MX-M200D
SPACE REQUIREMENTS AND PLANNING GUIDE
MX-M200D
Main Unit MX-M200D Main Unit
(with standard RSPF)
MX-M200D + AR-D34 MX-M200D + AR-D35
Plan ahead to make sure your installation is a great success!
Remember to check the latest information on these products and
confirm that the following items are available prior to installation.
□ Verify power dedication and check for power stability. The
MX-M200D Multifunction Document Systems require AC 120V,
60Hz, 15 Amps power source (machine draws 12 Amps).
□ Confirm that you have the latest firmware available to upgrade the
MX-M200D Multifunction Document Systems immediately.
□ Some accessories require a product key for operation.You should obtain
the accessory Application Code, machine’s serial number and register
online prior to arrival.
□ Make sure the customer has enough supplies on-hand to do a large
rush job. After-hours printing and/or holiday work may take place
immediately following an installation.
MX-206NT Toner
AR-205MD Developer
AR-205DR Drum
□ Check to see if My Sharp™ online training is set up for the end-user.
© 2010 Sharp Electronics Corporation. All rights reserved. 01/10
SHARP ELECTRONICS CORPORATION
Sharp Plaza, Mahwah, NJ 07495-1163
1-800-BE-SHARP • www.sharpusa.com
Approximately
24″ W x 19.25″ D x 20″ H
Approximately
24″ W x 19.25″ D x 12.25″ H
Deluxe High - AR-55ABDH
Deluxe Low - AR-55ABDL
MEASUREMENTS
23.25″
22.75″
25.75″
23.50″
11.75″
35.0″
30.75″
32.50″
E
F
G
H
A
B
C
D
E
F
GH
A
B
C
D