CODE : 00Z
q
INSTALLATION MANUAL
CONTENTS
Parts marked with "!" are important for maintaining the safety of the set. Be sure to replace these parts with specified
ones for maintaining the safety and performance of the set.
SHARP CORPORATION This document has been published to be used
for after sales service only.
The contents are subject to change without notice.
UPX500VIME
POS TERMINAL
MODEL UP-X500
(V version)
1. Removing the rear cover unit. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
2. Removing the side cover . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
3. Removing the LCD unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
4. Removing the MCR unit. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
5. Fixing the HDD unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
6. Removing the AC cord. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
7. Removing the AC adapter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
8. Removing the Main board (Extention RAM module) . . . . . . . . . . . . . . . . 3
9. COM port connector. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
9-1. FIXING THE REAR DISPLAY UP-I20DP. . . . . . . . . . . . . . . . . . . . . . . . . . . 4
9-2. FIXING THE POLE DISPLAY: UP-P20DP/DPB . . . . . . . . . . . . . . . . . . . . . 4
9-3. FIXING THE DRAWER UNIT: ER-03DW/04DW . . . . . . . . . . . . . . . . . . . . . 4
9-4. FIXING THE LAN CABLE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
10. Removing the contactless clerk key. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
11. Specification. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
