Shimadzu MOC63 User manual

MOC63 Specification
Accessories list
Safety Precautions
Read Instruction manual and understand before use of this
instrument.
●Use this instrument for measurements in which water
vaporizes from the sample under heating.
●The temperature of the heater installed in this instrument
becomes higher than the set heating temperature for the
sample.
●Any sample that is explosive, inflammable or may cause
hazardous reaction under heating must not be measured
with this instrument.
C000-E0000
Optional accessories
Printer EP-80
Printer EP-90
Protection cover(5pieces)
Aluminum sheet
Fiberglass sheet
Temperature calibration kit
Sample pan (SUS)
RS-232C cable
USB connection cable
Heater
1
2
3
4
5
6
7
8
9
10
Standard accessories
Sample pan
Aluminum sheet
tongs
In use protection cover
Fuse
1
2
3
4
5
Max
Min
Capacity
Minimum readability
Repeatability
Drying Heater
Power
Setting temperature
range
Display
Pan size
Dimension(W×D×H)mm
Weight
Operational temperature
and humidity range
Measurement mode
Timer setting
Interface
Measurement condition
data memory
Data memory
Temperature calibration kit
60 g
0.02g
0.001g
0.01/0.1%(Selectable)
0.15% (2g)
0.05%(5g)
0.02%(10g)
Straight type halogen lamp
400W
50〜200°C (1°C increments)
(There is time restriction on more than 180°C.)
LCD with Backlight
Φ95mm
200×330×175
Less than 6kg
5 to 40°C 85%RH or lower
Standard mode
(Automatic start/Automatic end/Timed end)
Rapid drying mode
(Automatic start/Automatic end/Timed end)
Slow drying mode
(Automatic start/Automatic end/Timed end)
Step drying mode
(Automatic start/Automatic end/Timed end)
1-120 minutes or continuousness
(max 12 hours).
RS-232C(9-pin connector)I/O port
USB (factory option)
10
50
Option
UniBloc Moisture AnalyzerUniBloc Moisture Analyzer
MOC63
ダミー
ダミー

MOC63
UniBloc Moisture Analyzer
Halogen heater promises
you quick and accurate
measurement.
Main feature of MOC63
Easy to operate software
and key layout.
Illuminated display provides
comfortable display visibility
in all settings.
High performance Moisture Analyzer
will be accept wide range area.
下記用途に特にお勧めです。
MOC63
For food industry
.
Inspection for harvest
.
Quality assurance for
processed food
For chemical industry
.
Quality control of paint
.
Inspection material under
manufacturing process
For environmental industry
.
Measurement of polluted sludge
.
Measurement the by-product
of biofuel production
For Pharma industry
.
Quality assurance of drug
.
Inspection for cosmetics
Reliability
Stability Response
3 Benefits of UniBloc.
Durable, high-performance aluminum alloy mass sensor
UniBloc Since 1987
The ATX/ATY series incorporates a one-piece aluminum alloy
mass sensor technology (UniBloc), first introduced by
Shimadzu for precision balances in 1989. It excels in
performance, and resists deterioration and damage by
ordinary impacts. The UniBloc’s compact, uniform structure
replaces 70 parts found in a conventional electromagnetic
balance sensor assembly and ensures stable temperature
characteristics, excellent response time and stable
corner-load performance.
The UniBloc design permits a consistency of production that
assures reliability and a long operational life.
この文章はダミーです。
The ATX/ATY series incorporates a one-piece
aluminum alloy mass sensor technology
(UniBloc), first introduced by Shimadzu for
precision balances in 1989. It excels in
performance, and resists deterioration and
damage by ordinary impacts. The UniBloc’s
compact, uniform structure replaces 70 parts
found in a conventional electromagnetic balance
sensor assembly and ensures stable temperature
characteristics, excellent response time and
stable corner-load performance.
The UniBloc design permits a consistency of
production that assures reliability and a long
operational life.
Interface
I/O port and RS232C are
available.
USB connection is also
available. (Option)
Large sample pan 95mm
diameter
Compact design
MOC63 is one of the most
compact instruments in its
class. Width is only 202
(mm).
32
ダミー
ダミー
ダミー
ダミー
ダミー
ダミー
ダミー
ダミー

MOC63
UniBloc Moisture Analyzer
.
Automatic ending mode
Automatically ends measurement when
moisture loss over the previous 30 seconds
becomes smaller than specified percentage.
.
Timed ending mode
Automatically ends measurement when the
specified amount of time has elapsed.
.
Rapid drying mode
First dries with the highest temperature for
the specified period, then shifts to the
specified temperature shortening
measurement time.
.
Slow drying mode
Gently heats samples that might solidify at
the surface or samples that reduce under
high temperature.
.
Step drying mode
Allows step by step change of drying
conditions . This feature is useful when
measuring samples that contain a large
amount of water.
Ending modes
Temperature Moisture vaporization
Set ending time
Temperature Moisture vaporization
Ending drying
Temperature Moisture vaporization
Temperature Temperature Moisture vaporization
Temperature Moisture vaporization
Automatic ending
Moisture vaporization
over 30 seconds
Temperature Predicted moisture vaporization
Predicted
measurement time
Alternate Drying modes
.
Automatic starting mode
This mode allows to start measurement only
closing lid.
It will save time in repeated measurement.
Starting mode
Measurement mode of MOC63
Floor
Floor
Floor
Floor
Floor
Floor
Floor
Floor
Floor
Floor
Floor
Orange juice
Paint
Automatic ending mode and timed ending mode is applicable for almost many sample. However, it takes time to
measurement or has a problem that the sample is burned or dissolved sometimes.You can select as above mode for
more reliable and rapid measurement.
○
○
○
○
○
○
○
○
○
○
○
○
○
Choice of measuring modes your application. Recommended measurement mode for each samples
Rapid drying
mode
Timed ending
mode
Slow drying
mode
Step drying
mode
Automatic
ending mode
54
ダミー

Automatic ending mode and timed ending
mode is applicable for almost many sample.
However, it takes time to measurement or
has a problem that the sample is burned or
dissolved sometimes. You can select.
Automatic ending mode and timed ending
mode is applicable for almost many sample.
However, it takes time to measurement or
has a problem that the sample is burned or
dissolved sometimes. You can select.
Advantage of MOC63 Measurement data
MOC63
UniBloc Moisture Analyzer
Easy operation
This model includes user-friendly software with
easy operation key.
The automatic starting mode will reduce your
measurement time in repeated measurement.
Data management
The measurement condition and data can be
stored in MOC63.
And both printer and PC connection are
available. USB connection model is also
available.
Maintenance
It’s very easy to clean up and replace halogen
lamp.
For food industry
Paints
Powder Coffee
Automatic ending mode and timed ending
mode is applicable for almost many sample.
However, it takes time to measurement or
has a problem that the sample is burned or
dissolved sometimes. You can select.
Automatic ending mode and timed ending
mode is applicable for almost many sample.
However, it takes time to measurement or
has a problem that the sample is burned or
dissolved sometimes. You can select.
For chemical industry
Tablet
For Pharma industry
76
ダミー
ダミー
ダミー
ダミー
ダミー ダミーダミー
ダミー ダミー
ダミー ダミー
ダミー ダミー