Shure Centraverse Series User manual

©2013Shure Incorporated
27A20376 (Rev. 1)
5 mm
(3/16 in.)
4
14 mm
(9/16 in.)
Centraverse Desktop Base
Installation
For additional information on product use, see
the user guide for the Shure Centraverse CVG
Gooseneck microphone.
Centraverse™ Series
Installed Sound Microphones
CVD
1. Install two screws into the mounting surface, exactly
14 mm (9/16 in.) apart. Leave a 5 mm (3/16 in.) gap
between the screw head and the mounting surface.
Only use screws with a flat-bottom head.
2. Place the microphone onto the screws and slide
backwards to lock into place. The cable can be rout-
ed through either the back or the bottom of the base.
3. Connect the gooseneck microphone to the base (mi-
crophone sold separately).
4. Connect the integrated XLR cable to a mixer or P.A.
system.
Note: This microphone requires +48V phantom
power to operate.
The Shure Centraverse CVD is a sleek desktop base that is compatible with all Centraverse 12” and 18” gooseneck
microphones. Featuring CommShield® technology, it provides RF intereference immunity and transparently passes
audio from the gooseneck microphone to a sound reinforcement system.
Features
• Black finish that blends unobtrusively with most surroundings
• Attached 12 ft XLR cable can run through the back or bottom of the base
• Mounting holes for secure installation
• Compatible with all Centraverse gooseneck microphones

Certifications
4.328”
(110 mm)
2.25 in.
(55 mm)
6.25”
(158 mm)
Specifications
Polarity
Positive pressure on diaphragm produces positive voltage on pin 2 with respect to pin 3
Environmental Conditions
Operating Temperature –18 to 57°C (0 to 135°F)
Storage Temperature –29 to 74°C (–20 to 165°F)
Relative Humidity 0 to 95%
Weight
19.2 oz. (544 g)
SHURE Incorporated http://www.shure.com
United States, Canada, Latin America, Caribbean:
5800 W. Touhy Avenue, Niles, IL 60714-4608, U.S.A.
Phone: [phone] U.S. Fax: [phone] Int’l Fax: [phone]
Europe, Middle East, Africa:
Shure Europe GmbH, Phone: [phone] Fax: [phone]
Asia, Pacific:
Shure Asia Limited, Phone: [phone] Fax: [phone]
Meets essential requirements of all applicable European Directives.
Eligible for CE marking.
The CE Declaration of Conformity can be obtained from Shure
Incorporated or any of its European representatives. For contact infor-
mation please visit www.shure.com
The CE Declaration of Conformity can be obtained from: www.shure.
com/europe/compliance
Authorized European representative:
Shure Europe GmbH
Headquarters Europe, Middle East & Africa
Department: EMEA Approval
Jakob-Dieffenbacher-Str. 12
75031 Eppingen, Germany
Phone: [phone]
Fax: [phone]
Email: [email protected]