Siemens BC80 Series User manual

Building Technologies
Fire safety and security products
BC8002A Democase
Product Manual
Overview
BC8002A democase is designed for demonstrating BC8002A fire alarm control system,
it consists of:
-BT8002A control panel
-BDS051A smoke detector
-BDS031A heat detector
-BDS121A manual call point
-BDS221A output module
Structure
BDS121A
Data cable
Power cable
BT8002A
BDS221A
BDS031A
BDS051A
I/O on mainboard

2
Building Technologies
A6V10322740_a_en_--
Fire Safety & Security Products 04.2011
LED and Switches
Output
(LEDs)
Off
No output.
On
Output is activated.
Input
(Switches)
Off
No intput.
On
Input is activated.
Confirmation
(Switches)
Off
No confirmation.
On
Confirmation is activated.
DC24V
(Switches)
Off
No power.
On
Power is supplied.
Installation
1. Open the demo case.
2. Connect power cable.
3. Connect data cable.
4. Switch AC power on.
5. System will go into the normal status and ready for test and demonstration
(login password is 4321 by default)
Operation
Events
Conditions
Action ( password required)
Normal
The green power LED is on. None
Alarm
The red fire alarm LED is on.
Acknowledge LED is flashing.
Alarm Silence LED is flashing.
The buzzer is ON.
1. Press ACKNOWLEDGE to acknowledge the
alarm. The acknowledge LED will be steady on.
The buzzer will be silenced.
2. Press ALARM SILENCE, the alarm silence LED
will be steady on.
3. Read fire location on LCD.
4. Remove fire alarm and press RESET to return
to normal status.
Trouble
The yellow trouble LED is on.
Acknowledge LED is flashing.
The buzzer is ON.
1. Press ACKNOWLEDGE to acknowledge the
trouble. The acknowledge LED will be steady
on. The buzzer will be silenced.
2. Read trouble location on LCD.
3. Remove trouble, the panel will go back to nor-
mal status automatically.
Isolation
The yellow isolation LED is on.
Acknowledge LED is flashing.
The buzzer is ON.
1. Press ACKNOWLEDGE to acknowledge the
isolation. The acknowledge LED will be steady
on. The buzzer will be silenced.
2. When the isolated point is open, the panel will
go back to normal status automatically.
Activation
The yellow activation LED is on.
Acknowledge LED is flashing.
The buzzer is ON.
1. Press ACKNOWLEDGE to acknowledge the
activation. The acknowledge LED will be steady
on. The buzzer will be silenced.
2. When the activated point is de-activated, the
panel will go back to normal status automatical-
ly.
The detailed operation of controller is referred to the “BC8002A Operating Manual” delivered with product.

Beijing Siemens Cerberus Electronics Limited
No.1,Fengzhidonglu, Xibeiwang, HaiDian District,
Beijing, 100094, China
Tel: [phone]
Fax: [phone]
© 2011 Copyright by
Beijing Siemens Cerberus Electronics Ltd.
Data and design subject to change without notice.
Doc. No.
A6V10322740_a_en_--
Version a
Manual BC80
Date
04.2011
Accessories
Key Used for opening or test MCP
Power cable Used for connecting AC power
Data cable
Used for data communication between the
control panel and the devices
Technical Data
AC power input
120 VAC/60Hz/ 1.9 A
240VAC//50Hz/ 900mA
Dimensions, in:mm
490×363×213
AC fuse capacity
5.0 A
Operating temperature
0℃～+49℃
Storage temperature
–10℃～+50℃
Relative humidity
≤93%（32±2℃）
Order Information
Type
Material No.
Part No.
Description
Weight
BC8002A Demo
S54421-N15-A1
100919973
BC8002A Democase
14.5Kg