Siemens SSA911.01ZB User manual

Connected Home Radiator Valve Actuator ZigBee, wireless
SSA911.01ZB
Wireless radiator valve actuator, works with SIEMENS Connected Home
●RF-controlled actuator communication based on ZigBee protocol (2.4 GHz, bidi-
rectional)
●Connection and operation with Connected Home Hub and Receiver
●Battery-powered by commercially available 1.5 V AA batteries
●Valve thread connection M30x1.5 mm
●Nominal stroke 5 mm
●Valve positioning force 90 N
●Automatic adaptation to valve
●Integrated temperature sensor and PI controller
●Temperature settings either on the device or via the app
A6V12789814_en--_a Smart Infrastructure
2022-02-14

2
Siemens A6V12789814_en--
_a
Smart Infrastructure 2022-02-
14
Use
●The SSA911.01ZB wireless radiator valve actuator is designed to work on radiator
valves of different manufacturers in HVAC applications using M30x1.5 thread. It operates
the valve to control the water flow and controls the room temperature.
●The valve actuator works in combination with Connected Home Hub GTW100ZB and
optionally with wireless repeater RCR110.2ZB.
●One Connected Home Hub GTW100ZB can be paired with up to 32 radiator valve actua-
tors in parallel. Wireless repeaters RCR110.2ZB can be used to extend the range of the
network.
Siemens Connected Home
(Application)
GTW100ZB SSA911.01ZB RCR110.2ZB
Basic functions
Function Description
Communication The communication protocol used is ZigBee.
ZigBee is a low-power wireless mesh networking protocol and enables device-to-device and
device-to-cloud communication. ZigBee is based on IEEE 802.15.4 radio standard.
Parallel operation Up to 32 actuators can be paired and operated with 1 Connected Home Hub GTW100ZB.
Pairing The pairing process is done via the mobile app Connected Home.
Calibration The actuator automatically detects the end positions of the radiator valve.
Temperature
setting
The setpoint temperature is set via the push buttons on the device.
Type summary
Type Stock no. Description
SSA911.01ZB S55181-A103 Smart radiator valve actuator

3
Siemens A6V12789814_en--
_a
Smart Infrastructure 2022-02-
14
Scope of delivery
●Radiator valve actuator SSA911.01ZB
●2 AA alkaline batteries (LR6)
●Quick guide (A5W00205935A)
●Third-party valve adapter for Danfoss (RA, RAV, RAVL)
Equipment combinations
Siemens valves
The SSA911.01ZB is suited for use with the following types of Siemens radiator valves:
Type kVS
[m3/h]
V

[l/h]
PN Data sheet
VDN1.., VEN1.. Radiator valves 0.63…1.41 -10 N2105
VDN2.., VEN2.., VUN2.. N2106
VD1..CLC.. 1.9…2.6 N2103
VPD.., VPE.., VPU.. MCV MiniCombiValves -10…135 A6V13089932
VD1.., VE1.. * Radiator valves 0.25…3.4 - N2145
VD2.., VE2.., VU2.. * N2146
kVS = Nominal flow rate of chilled water (5…30 °C) through the fully opened valve (H100) at a differential
pressure of 100 kPa (1 bar)
V
= Volumetric flow
* No longer available
Third-party valves without adapter
The SSA911.01ZB can operate third-party radiator valves without adapter, provided they
have a M30x1.5 mm connecting thread and meet the following requirements:
Force 90 N nominal
Fully closed x > 9.0 mm
Fully open y ≤14.5 mm
Valve pre-adjustment / kV-limitation
For valve pre-adjustments, refer to the relevant technical documentation on the valves. En-
sure a minimum valve stroke of > 0.5 mm.

4
Siemens A6V12789814_en--
_a
Smart Infrastructure 2022-02-
14
Accessories
Adapters for SSA911.01ZB for use with third-party valves
Type Stock no. For use with… Adapter thread
AV52 BPZ:AV52 Comap M28x1.5
AV56 BPZ:AV56 Giacomini -
AV57 BPZ:AV57 Herz M28x1.5
AV58 BPZ:AV58 Oventrop < 2002 M30x1
AV59 BPZ:AV59 Vaillant -
AV60 BPZ:AV60 TA < 2002 M28x1.5
AV61 BPZ:AV561 MMA Markaryd M28x1.5
For information on adapters for other radiator valve types and manufacturers, contact your
local office or branch.

5
Siemens A6V12789814_en--
_a
Smart Infrastructure 2022-02-
14
Product documentation
Title Contents Document ID
Connected Home Radiator Valve
Actuator ZigBee SSA911.01ZB
Data sheet: product description A6V12789814
Quick guide Connected Home
Radiator Actuator ZigBee
SSA911.01ZB
Quick instructions for mounting, commissioning
and operating SSA911.01ZB
A5W00205935A
Connected Home Hub GTW100ZB Data sheet: product description A6V12640776
Quick guide Connected Home Hub
GTW100ZB
Quick instructions for mounting, commissioning
and operating GTW100ZB
A6V12694180
Connected Home Receiver
RCR110.2ZB
Data sheet: product description A6V12680327
Quick guide Connected Home
Receiver RCR110.2ZB
Quick instructions for mounting, commissioning
and operating RCR110.2ZB
A6V11562443
Related documents such as environmental declarations, CE declarations, etc., can also be
downloaded at the following Internet address:
www.siemens.com/bt/download
Notes
Security
CAUTION
National safety regulations
Failure to comply with national safety regulations may result in personal injury and property
damage.
●Observe national provisions and comply with the appropriate safety regulations.
WARNING
Burns from hot surface
The screw nut with which the actuator is fastened on the radiator valve will become hot.
Risk of burns from contact with the screw nut.
When servicing the actuator:
●Switch off the radiator.
●Allow the radiator to cool off.

6
Siemens A6V12789814_en--
_a
Smart Infrastructure 2022-02-
14
WARNING
Explosion due to fire or short circuit, even with discharged batteries
Risk of injury due to flying parts
●Prevent the batteries from coming into contact with water.
●Do not recharge batteries.
●Do not damage or disassemble batteries.
●Do not expose batteries to temperatures over 85 °C.
WARNING
Leakage of electrolyte
Severe burns
●Handle damaged batteries only wearing suitable protective gloves.
●In case of contact with electrolyte, rinse eyes immediately with plenty of water. Consult
a doctor.
Observe the following:
●Observe the polarities (+/-).
●The batteries must be new and undamaged.
●Do not mix new and used batteries.
Store, transport and dispose of the batteries in compliance with local requirements, regula-
tions and laws. Also observe the instructions of the battery manufacturer.
Mounting
The SSA911.01ZB is mounted on the radiator valve. There are no preferred mounting posi-
tions; the actuator SSA911.01ZB may be operated in all mounting positions. Make sure the
display is visible and the buttons are accessible.
WARNING
Falling objects
Overhead installation may result in injury from falling objects.
●Do not install the actuator more than 2 m above ground.
Firmly tighten the screw nut by hand. No tools are required to tighten the actuator on the
valve.
Commissioning
●Install the mobile application Connected Home.
– The app provides a step-by-step guide through the commissioning process.
●Install and commission Connected Home Hub GTW100ZB (see also quick guide
A6V12694180).
●Optional: Install and commission Connected Home Receiver RCR110.2ZB (see also
quick guide A6V11562443).
●Install and commission Connected Home Radiator Valve SSA911.01ZB (see app, quick
guide A5W00205935A).

7
Siemens A6V12789814_en--
_a
Smart Infrastructure 2022-02-
14
Operation
HMI
The interface consists of an LCD display and three push
buttons.
Lower temperature
Okay (for task confirmation; with LED)
Raise temperature
Buttons
Press once Lower room temperature by 0.5
℃
.
Press and hold Lower room temperature by 0.5
℃
immediately, and lower by
another 0.5
℃
every 0.5 s while button is pressed; or until the
lowest temperature is reached.
Press once Raise room temperature by 0.5
℃
.
Press and hold Raise room temperature by 0.5
℃
immediately, and raise by
another 0.5
℃
every 0.5 s while button is pressed; or until the
highest temperature is reached.
Press once Perform the displayed function.
LED Red Blinking Update of controller software is being performed; no temperature
regulation possible.
Shining Commissioning error.
Green Blinking Waiting for confirmation by user (used to start tasks).
Shining (5 s) Task successfully completed.
Press and hold together for 3 s Activate or deactivate child safety lock.
Press and hold together for 10 s After 10 s, a factory reset can be performed (display shows the
duration the buttons are pressed).
To perform the factory reset, the device must first be deleted from
the device list in the Connected Home app.

8
Siemens A6V12789814_en--
_a
Smart Infrastructure 2022-02-
14
LCD Display
Lights up if mechanical tasks are ongoing.
Displays radio connection and lights up during pairing.
Low battery status – displayed when less than 15% battery is remaining.
Displayed when child safety lock is active.
Displayed continuously when LCD shows a setpoint temperatures.
Displayed continuously when SSA911.01ZB is in direct control mode (instead of
℃
icon).
Windows Open function is active.
●Function activates OFF mode for 15 min after a sudden drop in the room temperature.
●After 15 min, function stops OFF mode automatically and last active mode is restored.
●Function can be manually stopped by pressing the okay button.
Error codes
In case of an actuator malfunction or communication error with the Connected Home Hub,
an error code is shown on the display of the SSA911.01ZB.
The error codes ER1-ER3 can be cleared by pressing the okay button.
Code Error Cause / Measures
ER1 No valve detected ●Correctly mount the actuator on the radiator.
●Use the correct adapter.
ER2 Closing point not detected
ER3 Valve movement not
possible
●Check if the valve pin is freely moveable.
ERR Pairing failed ●Device is not in pairing mode.
●Device is out of range.
Maintenance
The SSA911.01ZB is maintenance free.

9
Siemens A6V12789814_en--
_a
Smart Infrastructure 2022-02-
14
Disposal
The device is considered an electronic device for disposal in accordance
with European Directive and may not be disposed of as domestic waste.
●Use only designated channels for disposing the devices.
●Comply with all local and currently applicable laws and regulations.
●Dispose of empty batteries at designated collection points.
Warranty
Technical data on specific applications are valid only together with Siemens products listed
under "Equipment combinations". Siemens rejects any and all warranties in the event that
third-party products are used.
Radio equipment directive
The device is using harmonized frequency in Europe, and is also in compliance with the Ra-
dio Equipment Directive (2014/53/EU, formerly 1999/5/EC).
Cyber security disclaimer
Siemens provides a portfolio of products, solutions, systems and services that includes secu-
rity functions that support the secure operation of plants, systems, machines and networks.
In the field of Building Technologies, this includes building automation and control, fire
safety, security management as well as physical security systems.
In order to protect plants, systems, machines and networks against cyber threats, it is neces-
sary to implement – and continuously maintain – a holistic, state-of-the-art security concept.
Siemens’ portfolio only forms one element of such a concept.
You are responsible for preventing unauthorized access to your plants, systems, machines
and networks which should only be connected to an enterprise network or the internet if and
to the extent such a connection is necessary and only when appropriate security measures
(e.g. firewalls and/or network segmentation) are in place. Additionally, Siemens’ guidance on
appropriate security measures should be taken into account. For additional information,
please contact your Siemens sales representative or visit https://www.sie-
mens.com/global/en/home/company/topic-areas/future-of-manufacturing/industrial-secu-
rity.html.
Siemens’ portfolio undergoes continuous development to make it more secure. Siemens
strongly recommends that updates are applied as soon as they are available and that the
latest versions are used. Use of versions that are no longer supported, and failure to apply
the latest updates may increase your exposure to cyber threats. Siemens strongly recom-
mends to comply with security advisories on the latest security threats, patches and other
related measures, published, among others, under https://www.siemens.com/cert/en/cert-
security-advisories.htm.

10
Siemens A6V12789814_en--
_a
Smart Infrastructure 2022-02-
14
Technical data
Power supply
Battery type 2 x alkaline batteries LR6 (AA) 1.5 V
Battery life Ca. 2 years
Radio communication
Frequency range 2.4…2.4385 GHz
Transmission power <8 dBm
Range ≤30 m, depending on application and building
Protocol ZigBee
Actuator
Stroke 5 mm
Positioning force typically 90 N
Noise level EN ISO 3741
< 30 dBA
Built-in temperature sensor
Measuring range 0…50 °C
Internal controller
Type PI
Degree of protection
Protection class Class III according to IEC 60730-1
Protection degree of housing IP 20 1) according to IEC 60529
Pollution degree Class 2 according to IEC 60730