Siemens INOX PRO SIMATIC IPC277D User manual

___________________
___________________
___________________
___________________
___________________
___________________
___________________
___________________
___________________
___________________
___________________
___________________
___________________
SIMATIC
Industrial PC
SIMATIC IPC277D
Operating Instructions
12/2016
A5E03409486
-AE
Preface
Overview
1
Safety instructions
2
Installing and connecting the
device
3
Commissioning the device
4
Advanced device functions
5
Operating the device
6
Device expansion and
parameter assignment
7
Device maintenance and
repairs
8
Technical specifications
9
Technical Support
A
Markings and symbols
B
List of abbreviations
C

Siemens AG
Division Digital Factory
Postfach 48 48
90026 NÜRNBERG
GERMANY
A5E03409486-AE
Ⓟ
12/2016 Subject to change
Copyright © Siemens AG 2016.
All rights reserved
Legal information
Warning notice system
This manual contains notices you have to observe in order to ensure your personal safety, as well as to prevent
damage to property. The notices referring to your personal safety are highlighted in the manual by a safety alert
symbol, notices referring only to property damage have no safety alert symbol. These notices shown below are
graded according to the degree of danger.
DANGER
indicates that death or severe personal injury will result if proper precautions are not taken.
WARNING
indicates that death or severe personal injury may result if proper precautions are not taken.
CAUTION
indicates that minor personal injury can result if proper precautions are not taken.
NOTICE
indicates that property damage can result if proper precautions are not taken.
If more than one degree of danger is present, the warning notice representing the highest degree of danger will
be used. A notice warning of injury to persons with a safety alert symbol may also include a warning relating to
property damage.
Qualified Personnel
The product/system described in this documentation may be operated only by
personnel qualified
for the specific
task in accordance with the relevant documentation, in particular its warning notices and safety instructions.
Qualified personnel are those who, based on their training and experience, are capable of identifying risks and
avoiding potential hazards when working with these products/systems.
Proper use of Siemens products
Note the following:
WARNING
Siemens products may only be used for the applications described in the catalog and in the relevant technical
documentation. If products and components from other manufacturers are used, these must be recommended
or approved by Siemens. Proper transport, storage, installation, assembly, commissioning, operation and
maintenance are required to ensure that the products operate safely and without any problems. The permissible
ambient conditions must be complied with. The information in the relevant documentation must be observed.
Trademarks
All names identified by ® are registered trademarks of Siemens AG. The remaining trademarks in this publication
may be trademarks whose use by third parties for their own purposes could violate the rights of the owner.
Disclaimer of Liability
We have reviewed the contents of this publication to ensure consistency with the hardware and software
described. Since variance cannot be precluded entirely, we cannot guarantee full consistency. However, the
information in this publication is reviewed regularly and any necessary corrections are included in subsequent
editions.

SIMATIC IPC277D
Operating Instructions, 12/2016, A5E03409486-AE 3
Preface
These operating instructions contain all the information you need for commissioning and
operation of the SIMATIC IPC277D.
It is intended both for programming and testing personnel who commission the device and
connect it with other units (automation systems, programming devices), as well as for service
and maintenance personnel who install add-ons or carry out fault/error analyses.
Basic knowledge required
A solid background in personal computers and Microsoft operating systems is required to
understand this manual. General knowledge in the field automation control engineering is
recommended.
Scope of validity of this documentation
These operating instructions are valid for all versions of the SIMATIC IPC277D.
Scope of this documentation
The documentation for the SIMATIC IPC277D consists of:
●Product information, e.g. "Important notes on your device"
●Quick Install Guide SIMATIC IPC277D
●SIMATIC IPC277D operating instructions in English and German
The PDF version of the documentation is supplied with the device on the
"Documentation and Drivers" CD/DVD.
Conventions
The terms "PC" or "device" are used in place of the product name SIMATIC IPC277D in
these operating instructions.
In these operating instructions, the terms "Windows Embedded Standard 2009" and
"Windows Embedded Standard 7" are also abbreviated with the term "Windows Embedded
Standard". "Windows 7" is used as an abbreviation for "Windows 7 Ultimate".

Preface
SIMATIC IPC277D
4Operating Instructions, 12/2016, A5E03409486-AE
History
The following earlier release versions of these operating instructions have been published:
Edition
Comment
07/2011
First edition, valid for the first delivery stage
11/2011 Second edition, valid for all delivery stages
02/2012
Third edition with corrections
06/2013
Fourth edition with corrections
12/2016
Fifth edition with corrections
Guideline to the operating instructions
Content structure
Contents
Preface Purpose, layout and description of the important topics
Table of contents Detailed organization of the documentation, including the index of pages
and chapters
Overview •Description of the product: Characteristics and field of application
•Product package
•Structure of the product/system: Operator control and connection ele-
ments
•Accessories
Safety instructions All generally valid safety aspects:
•Legal requirements
•Product/system view during installation
•General information on commissioning
•Notes on operation
Installing and connect-
ing the device
•Application planning: Aspects of storage, transport, environmental and
EMC conditions to be considered in the preparatory stage.
•Installation: Product installation options and installation instructions
•Connection: Options of connecting the product and wiring instructions
•Integration: Options of integrating the product into existing or planned
automation systems and networks.
Commissioning the
device
Commissioning the product/system
Extended device func-
tions
Monitoring and display functions
Expanding and assign-
ing parameters to the
device
Procedure for installing device expansions (modules, drives)

Preface
SIMATIC IPC277D
Operating Instructions, 12/2016, A5E03409486-AE 5
Content structure
Contents
Device maintenance
and repair
•Replacing hardware components
•Restoring and setting up the operating system and BIOS (Recovery)
•Installing drivers and software
•Service and spare parts
•Recycling and disposal
Technical specifications •General specifications in compliance with relevant standards and cur-
rent/voltage values
•Guidelines and certifications, ESD guidelines, notes on retrofitting
•Dimension drawings: Dimensions of the device and of modules
•Detailed descriptions of boards and system resources
Technical support •Service and support
•Troubleshooting: Problems, causes, remedy
•BIOS Setup
Abbreviations
Abbreviations of the technical terms used

Preface
SIMATIC IPC277D
6Operating Instructions, 12/2016, A5E03409486-AE

SIMATIC IPC277D
Operating Instructions, 12/2016, A5E03409486-AE 7
Table of contents
Preface ...................................................................................................................................................... 3
1 Overview.................................................................................................................................................. 11
1.1 Product description .................................................................................................................11
1.2 Configuration of the devices ...................................................................................................13
1.2.1 SIMATIC IPC277D 7" .............................................................................................................13
1.2.2 SIMATIC IPC277D 9" .............................................................................................................15
1.2.3 SIMATIC IPC277D 12", 15" and 19".......................................................................................17
1.2.4 IPC277D 7" and 9" – interfaces and operator controls...........................................................20
1.2.5 IPC277D 12", 15" and 19" – interfaces and operator controls................................................20
1.3 Accessories.............................................................................................................................21
2 Safety instructions ................................................................................................................................... 23
2.1 General safety instructions .....................................................................................................23
2.2 Notes on usage.......................................................................................................................27
3 Installing and connecting the device ........................................................................................................ 29
3.1 Preparing for installation .........................................................................................................29
3.1.1 Checking the delivery package...............................................................................................29
3.1.2 Identification data of the device ..............................................................................................31
3.1.3 Permitted mounting positions .................................................................................................33
3.1.4 Preparing the mounting cutout................................................................................................35
3.2 Installing the device ................................................................................................................37
3.2.1 Installation guidelines .............................................................................................................37
3.2.2 Securing with clamps..............................................................................................................39
3.2.3 Securing with clamps (can be ordered as options).................................................................41
3.3 Connecting the device ............................................................................................................42
3.3.1 Notes on connecting ...............................................................................................................42
3.3.2 Connecting the protective earth..............................................................................................44
3.3.3 Connecting the power supply to the 7" and 9" devices ..........................................................45
3.3.4 Connecting the power supply to the 12", 15 and 19" devices ................................................47
3.3.5 Connect device to networks....................................................................................................49
3.3.6 Mounting the Ethernet connector strain relief.........................................................................50
3.3.7 Securing the cables ................................................................................................................51
4 Commissioning the device....................................................................................................................... 53
4.1 General information on commissioning ..................................................................................53
4.2 Initial commissioning...............................................................................................................54
4.3 Windows Security Center .......................................................................................................55

Table of contents
SIMATIC IPC277D
8Operating Instructions, 12/2016, A5E03409486-AE
5 Advanced device functions ...................................................................................................................... 57
5.1 Monitoring functions............................................................................................................... 57
5.1.1 Overview of the monitoring functions..................................................................................... 57
5.1.2 Temperature monitoring/display ............................................................................................ 58
5.1.3 Watchdog (WD)...................................................................................................................... 58
5.1.4 Battery monitoring.................................................................................................................. 59
5.2 Enhanced Write Filter ............................................................................................................ 60
5.3 File-Based Write Filter ........................................................................................................... 62
5.4 Buffer memory MRAM (option) .............................................................................................. 63
6 Operating the device................................................................................................................................ 65
6.1 Overview ................................................................................................................................ 65
6.2 Operating the touch screen.................................................................................................... 66
6.3 Configuring the touch screen................................................................................................. 67
6.3.1 Standard calibration ............................................................................................................... 67
6.3.2 Extended calibration .............................................................................................................. 69
6.3.3 Extended Touch touch functionality....................................................................................... 70
6.4 Using the on-screen keyboard............................................................................................... 71
6.5 Setting the display brightness................................................................................................ 72
6.6 Command line call ................................................................................................................. 73
6.7 Setting the screen saver ........................................................................................................ 74
6.8 WinMove ................................................................................................................................ 76
7 Device expansion and parameter assignment ......................................................................................... 77
7.1 Open the device..................................................................................................................... 77
7.2 Inserting and removing CompactFlash cards ........................................................................ 79
8 Device maintenance and repairs ............................................................................................................. 81
8.1 Cleaning the Device Front ..................................................................................................... 81
8.2 Recycling and disposal .......................................................................................................... 82
8.3 Installing and removing hardware.......................................................................................... 82
8.3.1 Repair information.................................................................................................................. 82
8.3.2 Maintenance........................................................................................................................... 84
8.3.3 Replacing the backup battery ................................................................................................ 85
8.3.4 Replacing drives of IPC277D 7" and 9" ................................................................................. 88
8.3.5 Replacing the drive of an IPC277D 12", 15" and 19" ............................................................ 90
8.4 Installing the software ............................................................................................................ 92
8.4.1 Reinstalling the operating system.......................................................................................... 92
8.4.1.1 General installation procedure............................................................................................... 92
8.4.1.2 Restoring the factory state ..................................................................................................... 93
8.4.1.3 Installing Windows XP ........................................................................................................... 94
8.4.1.4 Installation of Windows 7 ....................................................................................................... 96
8.4.1.5 Setting up the language selection by means of the Multilanguage User Interface (MUI).... 100

Table of contents
SIMATIC IPC277D
Operating Instructions, 12/2016, A5E03409486-AE 9
8.4.2 Partitioning data media .........................................................................................................102
8.4.2.1 Partitions in Windows Embedded Standard 2009 and Windows Embedded Standard 7 ....102
8.4.2.2 Partitions under Windows 7 Ultimate and Windows XP Professional ..................................103
8.4.2.3 Adapting partitions in Windows 7 Ultimate and Windows Embedded Standard 7 ...............103
8.4.2.4 Adapting partitions in Windows XP and Windows Embedded Standard 2009.....................104
8.4.3 Drivers and software.............................................................................................................105
8.4.3.1 Driver installation for Windows Embedded Standard 7 and 2009........................................105
8.4.3.2 Installing drivers and software ..............................................................................................105
8.4.4 Installing updates..................................................................................................................107
8.4.4.1 Updating the operating system.............................................................................................107
8.4.4.2 Installing or updating application programs and drivers .......................................................107
9 Technical specifications......................................................................................................................... 109
9.1 Certificates and approvals ....................................................................................................109
9.2 Directives and declarations...................................................................................................112
9.2.1 Electromagnetic compatibility for industrial environments....................................................112
9.2.2 ESD guideline .......................................................................................................................112
9.3 Dimension drawings..............................................................................................................115
9.3.1 Dimensional drawing IPC277D, 7" display ...........................................................................115
9.3.2 Dimensional drawing IPC277D, 9" display ...........................................................................116
9.3.3 Dimensional drawing IPC277D, 12" display .........................................................................117
9.3.4 Dimensional drawing IPC277D, 15" display .........................................................................118
9.3.5 Dimensional drawing IPC277D, 19" display .........................................................................119
9.4 Technical specifications........................................................................................................120
9.4.1 General technical specifications ...........................................................................................120
9.4.2 Environmental conditions......................................................................................................123
9.4.3 Shipbuilding ..........................................................................................................................124
9.4.4 Power supply IPC277D, 7" and 9" displays..........................................................................124
9.4.4.1 Power requirements of additional components ....................................................................124
9.4.4.2 Power consumption ..............................................................................................................125
9.4.4.3 DC power supply...................................................................................................................125
9.4.5 Power supply IPC277D, 12", 15" and 19" display ................................................................126
9.4.5.1 Power requirements of additional components ....................................................................126
9.4.5.2 Power consumption ..............................................................................................................126
9.4.5.3 DC power supply...................................................................................................................127
9.5 Hardware description............................................................................................................128
9.5.1 Technical features of the motherboard.................................................................................128
9.5.2 External interfaces ................................................................................................................128
9.5.2.1 Overview of interfaces ..........................................................................................................128
9.5.2.2 Serial interface......................................................................................................................129
9.5.2.3 Ethernet port .........................................................................................................................129
9.5.2.4 USB 2.0 port .........................................................................................................................130
9.5.3 System resources .................................................................................................................131
9.5.3.1 Currently allocated system resources...................................................................................131
9.5.3.2 System resources used by the BIOS/DOS...........................................................................131
9.5.4 Input/output address areas ...................................................................................................133
9.5.4.1 Overview of the internal module registers ............................................................................133
9.5.4.2 Battery status register (read-only) ........................................................................................133
9.5.4.3 MRAM address register ........................................................................................................133

Table of contents
SIMATIC IPC277D
10 Operating Instructions, 12/2016, A5E03409486-AE
9.6 BIOS description .................................................................................................................. 134
9.6.1 Overview .............................................................................................................................. 134
9.6.2 Starting BIOS Setup............................................................................................................. 134
9.6.3 BIOS Setup menus .............................................................................................................. 135
9.6.3.1 BIOS Setup overview........................................................................................................... 135
9.6.3.2 Main menu ........................................................................................................................... 137
9.6.3.3 Advanced menu ................................................................................................................... 138
9.6.3.4 Security menu ...................................................................................................................... 143
9.6.3.5 Power menu......................................................................................................................... 144
9.6.3.6 Boot menu............................................................................................................................ 145
9.6.3.7 Version menu....................................................................................................................... 151
9.6.3.8 Exit menu ............................................................................................................................. 152
9.6.4 BIOS Setup default settings................................................................................................. 153
9.6.5 Alarm, error and system messages ..................................................................................... 156
9.7 Functional scope in Windows .............................................................................................. 157
9.7.1 Windows Embedded Standard 2009 ................................................................................... 157
9.7.2 Windows Embedded Standard 7 ......................................................................................... 159
A Technical Support.................................................................................................................................. 161
A.1 Service and support............................................................................................................. 161
A.2 Problem solving.................................................................................................................... 162
B Markings and symbols ........................................................................................................................... 163
B.1 Overview .............................................................................................................................. 163
B.2 Safety ................................................................................................................................... 163
B.3 Operator controls ................................................................................................................. 163
B.4 Certificates, approvals and markings................................................................................... 164
B.5 Interfaces ............................................................................................................................. 165
C List of abbreviations............................................................................................................................... 167
Glossary ................................................................................................................................................ 171
Index...................................................................................................................................................... 179

SIMATIC IPC277D
Operating Instructions, 12/2016, A5E03409486-AE 11
Overview
1
1.1
Product description
The SIMATIC IPC277D provides high-level industrial performance.
●Compact design
●Rugged
●Maintenance-free operation possible
SIMATIC IPC277D is available with various control units that differ with regard to the display
size. This display is a color display with a backlit "wide-screen" format TFT color display.
Displays are available in the following sizes for the SIMATIC IPC277D:
●7" touch
●9" touch
●12" touch
●15" touch
●19" touch

Overview
1.1 Product description
SIMATIC IPC277D
12 Operating Instructions, 12/2016, A5E03409486-AE
Basic data
Power supply 24V DC (19.2 to 28.8 V), max. 1.8 A
Conditions of use
Operation without fan
Monitoring and safety functions
Watchdog •Monitoring function for program execution
•Restart can be parameterized in the event of a fault
Voltage drop Up to 15 ms buffer time at full load
Buffer memory
512 KB MRAM

Overview
1.2 Configuration of the devices
SIMATIC IPC277D
Operating Instructions, 12/2016, A5E03409486-AE 13
1.2
Configuration of the devices
1.2.1
SIMATIC IPC277D 7"
Front and side view
①
Display/touch screen
②
Mounting clamp recess
③
Mounting seal
Rear view
①
Rating plate
②
Interface designation

Overview
1.2 Configuration of the devices
SIMATIC IPC277D
14 Operating Instructions, 12/2016, A5E03409486-AE
Bottom view
①
Interfaces and operating elements
②
Mounting clamp recess
③
Flap for memory card slot

Overview
1.2 Configuration of the devices
SIMATIC IPC277D
Operating Instructions, 12/2016, A5E03409486-AE 15
1.2.2
SIMATIC IPC277D 9"
Front and side view
①
Display/touch screen
②
Mounting clamp recess
③
Mounting seal
Rear view
①
Rating plate
②
Interface designation

Overview
1.2 Configuration of the devices
SIMATIC IPC277D
16 Operating Instructions, 12/2016, A5E03409486-AE
Bottom view
①
Interfaces and operating elements
②
Mounting clamp recess
③
Flap for memory card slot

Overview
1.2 Configuration of the devices
SIMATIC IPC277D
Operating Instructions, 12/2016, A5E03409486-AE 17
1.2.3
SIMATIC IPC277D 12", 15" and 19"
This section describes the 12", 15" and 19" devices using the example of the
SIMATIC IPC277D 12". The 15" and 19" devices have an additional USB port at the
front.
Front and side view, 12"
①
Display/touch screen
②
Mounting clamp recess
③
Mounting seal

Overview
1.2 Configuration of the devices
SIMATIC IPC277D
18 Operating Instructions, 12/2016, A5E03409486-AE
Front view, 15"
①
Front USB port
②
Display/touch screen
The front view of the 19" device is similar.

Overview
1.2 Configuration of the devices
SIMATIC IPC277D
Operating Instructions, 12/2016, A5E03409486-AE 19
Rear view
①
Rating plate
②
Interface designation
Bottom view
①
Mounting clamp recess
②
Interfaces and operating elements
③
Flap for memory card slot

Overview
1.2 Configuration of the devices
SIMATIC IPC277D
20 Operating Instructions, 12/2016, A5E03409486-AE
1.2.4
IPC277D 7" and 9" – interfaces and operator controls
①
RJ45 Ethernet connection LAN2 for 10/100/1000 Mbps
②
RJ45 Ethernet connection LAN1 for 10/100/1000 Mbps
③
RS-232 interface, D-sub connector, 9-pin
④
USB 2.0 connection, high speed
Only two USB interfaces may be operated simultaneously in high-current mode.
⑤
On/off switch. OFF position, when the symbol "C-" is pressed in.
⑥
Connection for a 24 VDC power supply
⑦
Protective conductor connection
Observe the printing on the rear of the device.
1.2.5
IPC277D 12", 15" and 19" – interfaces and operator controls
①
Protective conductor connection
②
On/off switch: OFF position, when the symbol "C-" is pressed in.
③
Connection for a 24 VDC power supply
④
RJ45 Ethernet connection LAN2 for 10/100/1000 Mbps
⑤
RJ45 Ethernet connection LAN1 for 10/100/1000 Mbps
⑥
RS-232 interface, D-sub connector, 9-pin
⑦
USB 2.0 connection, high speed
Only two USB interfaces may be operated simultaneously in high-current mode.
Observe the printing on the rear of the device.