Siemens BZLLRHSE User manual

806910A01
s
Covering Frame (operator)
Marco de protección para puertas (para acc. motor)
Cadre pour découpe de porte
1 / 3
JG / LG
Use only with Siemens certified Components.
Utilizar únicamente con componentes certificados de Siemens.
A utiliser uniquement avec les composants certifiés Siemens.
Installation Instructions / Instructivo de Instalación
Turn off and lock out all power supplying this device before
working on this device.
Replace allcovers before power supplying this device is
turned on.
Couper l'alimentation del'appareil et barrer avant de
travailler.
Remplacez touts les couverts avant que
l'approvisionnement de pouvoirsoit alimenté.
Tensión peligrosa.
Puedecausar la muerte o lesiones graves. Tension dangereuse. Danger de mort ou risque de blessures graves.
Hazardous Voltage
Will cause death or serious injury
Desenergice totalmente antes de instalar o darle servicio.
Reemplace todas las barreras y cubiertas antes de
energizar el interruptor.
Turn off and lock out all power supplying this device before
working on this device.
Replace allcovers before power supplying this device is
turned on.
Couper l'alimentation del'appareil et barrer avant de
travailler.
Remplacez touts les couverts avant que
l'approvisionnement de pouvoirsoit alimenté.
Tensión peligrosa.
Puedecausar la muerte o lesiones graves. Tension dangereuse. Danger de mort ou risque de blessures graves.
Hazardous Voltage
Will cause death or serious injury
Desenergice totalmente antes de instalar o darle servicio.
Reemplace todas las barreras y cubiertas antes de
energizar el interruptor.
175
6X Ø5.5
113.5
206
195
4.15 [ 105.5 ]
8.11 [ 206 ]
3.43 [ 87 ]
4.25 [ 108 ]
6.89 [ 175 ]
8.11 [ 206 ]
6X Ø.22 [ Ø5.5 ]
4.47 [ 113.5 ]
4.82 [ 122.5 ]
5.24 [ 133 ]
8.92 [ 226.5 ]
3.17 [ 80.5 ]
7.68 [ 195 ]
Ø.55
[ Ø14 ]
For Use With Frame JG, LG, MG
Para Usar Con Caja Base JG, LG, MG
I.L. No. 806910A01
Item: BZLLRHSE 3VL9400-8BG01
BZLMRHSE 3VL9600-8BG01
BZLMBDC 3VL9600-8BH01
U.S. Cat. No. Euro Order No.
10 mm
Ø .43“
[ Ø 11.0 mm ]
Ø .22“
[ Ø 5.5 mm ]
Ø .55“
[ Ø 14.0 mm ]
Cal. ISO 6789
BZLMBDC / 3VL9600-8BH01
4 X -
6 X -
c
d
BZLLRHSE / 3VL9400-8BG01
BZLMRHSE / 3VL9600-8BG01
6 X -
ab
NOTE - These instructions do not purport to cover all details or variations
in equipment, or to provide for every possible contingency to be met in
connection with installation, operation or maintenance. Should further
information be desired or should particular problems arise, which are not
covered sufficiently for the purchaser’s purposes, the matter should be
referred to the local Siemens sales office. The contents of this instruction
manual shall not become part of or modify any prior or existing
agreement, commitment or relationship. The sales contract contains the
entire obligation of Siemens. The warranty contained in the contract
between the parties is the sole warranty of Siemens. Any statements
contained herein do not create new warranties or modify the existing
warranty.
Trademarks - Unless otherwise noted, all names identified by ® are
registered trademarks of Siemens AG or Siemens Industry, Inc. The
remaining trademarks in this publication may be trademarks whose use
by third parties for their own purposes could violate the rights of the
owner.

256
131
159
133
226
113
209
132
50.5
235
Ø11
141.5
THIS HOLE T O BE USED
" FOR WITHDRAW ONLY"
2 / 3
MG
806910A01
4.45 [ 113 ]
10.08 [ 256 ] 5.24 [ 133 ]
8.90 [ 226 ]
6X Ø.22 [ Ø5.5 ]
Ø.55 [ Ø14 ]
6.26 [ 159 ]
5.16 [ 131 ]
8.23 [ 209 ]
5.20 [ 132 ]
4.63 [ 117.5 ]
5.57 [ 141.5 ]
2.0
[ 50.5 ]
9.25 [ 235 ]
8.74 [ 222 ]
Ø.43 [ Ø11 ]
DCAMRC3 / 3VL9600 - 4WA31
DCAMFC3 / 3VL9600 - 4WC31
1BZLLRHSE / 3VL9400-8BG01
BZLMRHSE / 3VL9600-8BG01
B
A
a
b
6 X
3 lb. in.
[ .3 Nm ]
Ex:
IP 20 – IEC529 IP 40 – IEC529
a = IP 20 – IEC529
a + b = IP 40 – IEC529
DCAJ _ C3 / 3VL94004W _ 31
DCAL _ C3 / 3VL94604W _ 31

BZLMBDC / 3VL9600-8BH01
3 / 3 806910A01
Turn off and lock out all power supplying this device before
working on this device.
Replace allcovers before power supplying this device is
turned on.
Couper l'alimentation del'appareil et barrer avant de
travailler.
Remplacez touts les couverts avant que
l'approvisionnement de pouvoirsoit alimenté.
Tensión peligrosa.
Puedecausar la muerte o lesiones graves. Tension dangereuse. Danger de mort ou risque de blessures graves.
Hazardous Voltage
Will cause death or serious injury
Desenergice totalmente antes de instalar o darle servicio.
Reemplace todas las barreras y cubiertas antes de
energizar el interruptor.
Turn off and lock out all power supplying this device before
working on this device.
Replace allcovers before power supplying this device is
turned on.
Couper l'alimentation del'appareil et barrer avant de
travailler.
Remplacez touts les couverts avant que
l'approvisionnement de pouvoirsoit alimenté.
Tensión peligrosa.
Puedecausar la muerte o lesiones graves. Tension dangereuse. Danger de mort ou risque de blessures graves.
Hazardous Voltage
Will cause death or serious injury
Desenergice totalmente antes de instalar o darle servicio.
Reemplace todas las barreras y cubiertas antes de
energizar el interruptor.
For Support in Europe refer to :
Bestell-Nr. / Order No.: 3ZX1012-0VL68-0BA0 Internet: www.siemens.de/lowvoltage/technical-assistance GWA 4NEB 179 6910-10 DS 02
2d
4 X
18 lb. in.
[ 2.0 Nm ]
4 X
IP 20 – IEC529
3
6 X
3 lb. in.
[ .3 Nm ]
Ex:
c
1
2 X
Subject to change without prior notice © Siemens Industry Inc. 2010
Siemens Industry, Inc. , Norcross, GA 30092 U.S.A.
Technical Support: Toll Free: 1-800-241-4453 Internet: www.usa.siemens.com/powerdistribution