Siemens MOBIC T8 for Windows CE 3.0 User manual

Preface, Contents
Overview 1
Design and Functional Elements 2
Accessories 3
Ports 4
Getting Started 5
Data Exchange 6
Supplied Programs and Tools 7
Backup and Restore 8
Changing the Settings of the MO-
BIC 9
Installing Additional Applications
and Drivers 1
0
Repair, Care and Maintenance 1
1
Certificates, Directives, and De-
clarations 1
2
Frequently Asked Questions
(FAQs) 1
3
Technical Specifications 1
4
Glossary, Index
Release 12/2004
C79000-G8976-C190-02
MOBIC T8 for Windows CE 3.0
Manual
SIMATIC NET
Industrial Communication
The following supplement is part of this documentation:
No. Designation Drawing number Edition
1 Product information A5E00882110-01 08/2006

ii MOBIC T8 for Windows CE 3.0
C79000-G8976-C190-02
Classification of Safety-Related Notices
This manual contains notices which you should observe to ensure your own personal safety, as well as to
protect the product and connected equipment. These notices are highlighted in the manual by a warning
triangle and are marked as follows according to the level of danger:
!Danger
indicates that death, severe personal injury or substantial property damage will result if proper precau-
tions are not taken.
!Warning
indicates that death, severe personal injury or substantial property damage can result if proper precau-
tions are not taken.
!Caution
indicates that minor personal injury or property damage can result if proper precautions are not taken.
Caution
indicates that property damage can result if proper precautions are not taken.
Notice
highlights important information on the product, using the product, or part of the documentation that is of
particular importance and that may have detrimental effects if ignored.
Note
highlights important information on the product, using the product, or part of the documentation that is of
particular importance and that will be of benefit to the user.
Trademarks MOBICR, SIMATICRand SIMATIC NETRare registered trademarks of SIEMENS AG.
Third parties using for their own purposes any other names in this document which refer to trademarks
might infringe upon the rights of the trademark owners.

iii
MOBIC T8 for Windows CE 3.0
C79000-G8976-C190-02
Safety Instructions Regarding your Product:
Before you use the product described here, read the safety instructions below thoroughly.
Qualified Personnel
Only qualified personnel should be allowed to install and work on this equipment. Qualified persons are
defined as persons who are authorized to commission, to ground, and to tag circuits, equipment, and sy-
stems in accordance with established safety practices and standards.
Correct Usage of Hardware Products
Note the following:
!Warning
This device and its components may only be used for the applications described in the catalog or the
technical description, and only in connection with devices or components from other manufacturers which
have been approved or recommended by Siemens.
This product can only function correctly and safely if it is transported, stored, set up, and installed correct-
ly, and operated and maintained as recommended.
Before you use the supplied sample programs or programs you have written yourself, make certain that
no injury to persons nor damage to equipment can result in your plant or process.
EU Directive: Do not start up until you have established that the machine on which you intend to run this
component complies with the directive 89/392/EEC.
Correct Usage of Software Products
Note the following:
!Warning
This software may only be used for the applications described in the catalog or the technical description,
and only in connection with software products, devices, or components from other manufacturers which
have been approved or recommended by Siemens.
Before you use the supplied sample programs or programs you have written yourself, make certain that
no injury to persons nor damage to equipment can result in your plant or process.
We have checked the contents of this manual for agreement with the hardwa-
re and software described. Since deviations cannot be precluded entirely, we
cannot guarantee full agreement. However, the data in this manual are revie-
wed regularly and any necessary corrections included in subsequent edi-
tions. Suggestions for improvement are welcomed.
Disclaimer of LiabilityCopyright ESiemensAG 2003 All rights reserved
The reproduction, transmission or use of this document or its contents is not
permitted without express written authority. Offenders will be liable for
damages. All rights, including rights created by patent grant or registration of
a utility model or design, are reserved.
Siemens AG
Bereich Automatisierungstechnik
Geschäftsgebiet Industrie-Automatisierung
Postfach 4848, D-90327 Nürnberg Subject to technical change.
Siemens Aktiengesellschaft G79000-G8976-C190-02

iv MOBIC T8 for Windows CE 3.0
C79000-G8976-C190-02
Notes on MOBIC T8
Radio Applications
Note the following:
!Warning
If you use radio applications, for example in conjunction with GSM, wireless LAN etc., make sure that you
adhere to the pertinent legal regulations and conditions of use.
Note the following:
!Warning
Turn off the MOBIC T8 in an aircraft. Prevent the MOBIC T8 from being turned on accidentally.
Note the following:
!Warning
Turn off the MOBIC T8 if you are in the vicinity of gas stations, fuel depots, chemical plants or blasting
operations. The MOBIC T8 can interfere with technical installations.
Note the following:
!Warning
Improper use of the MOBIC T8 invalidates the warranty.

i
MOBIC T8 for Windows CE 3.0
C79000-G8976-C190-02
Preface