Siemens CAB-TK Series User manual

Siemens Building Technologies
Fire Safety
P/N 315-033013-1
Installation Instructions
Model CAB-TK
Trim Kits for Small [CAB1(R)-TK], Medium [CAB2(R)-TK]
and Lar e [CAB3(R)-TK] Enclosure Backboxes
INTRODUCTION The SIEMENS Models CAB1(R)-TK, CAB2(R)-TK a d CAB3(R)-TK Trim Kits are used to
semi-flush mou t CAB1(R), CAB2-BB a d CAB3-BB e closures, respectively. The
CAB1-TK, CAB2-TK a d CAB3-TK Trim Kits are black a d the CAB1R-TK, CAB2R-TK
a d CAB3R-TK Trim Kits are red.
PRE-INSTALLATION Determi e the locatio where the CAB e closure is to be mou ted. Refer to the
CAB1/CAB1R I stallatio I structio s, P/N 315-033007, or the CAB2-BB/CAB3-BB
I stallatio I structio s, P/N 315-033009, as appropriate.
INSTALLATION Refer to Figure 1 for a typical Trim Kit i stallatio .
1. Cut the ecessary hole i the wall for the CAB e closure.
2. Faste each trim piece to the backbox as show i Figure 1. Usi g the
screws provided, place the head of each screw i side the e closure a d
faste it to the trim piece with Pem uts. CAB1 uses 8 screws. CAB2 a d
CAB3 each use 10 screws.
3. Secure the pa el i the recess. Refer to the CAB1/CAB1R I stallatio
I structio s, P/N 315-033007, or the CAB2-BB/CAB3-BB I stallatio I struc-
tio s, P/N 315-033009, as appropriate.
The Trim Kit is designed so that steps 2 and 3 of this procedure can be reversed.
COMPATIBILITY The CAB1-TK is desig ed for use with the CAB1; the CAB1R-TK is desig ed for use
with the CAB1R.
The CAB2-TK is desig ed for use with the CAB2-BB a d the CAB2-BD; the
CAB2R-TK is desig ed for use with the CAB2-BB a d the CAB2-RD.
The CAB3-TK is desig ed for use with the CAB3-BB a d the CAB3-BD; the
CAB3R-TK is desig ed for use with the CAB3-BB a d the CAB3-RD.

SPECIFICATIONS CAB1(R)-TK:
Two 29-1/8L x 1-1/2W x 3/4D trim pieces
Two 27L x 1-1/2W x 3/4D trim pieces
CAB2(R)-TK:
Two 29-1/8L x 1-1/2W x 3/4D trim pieces
Two 44-3/4L x 1-1/2W x 3/4D trim pieces
CAB3(R)-TK:
Two 29-1/8L x 1-1/2W x 3/4D trim pieces
Two 62-1/2L x 1-1/2W x 3/4D trim pieces
FINISHED WALL
29 1/8 in
¾in
27 in
4½in
1½in
CAB1(R)
CAB1(R)-TK
Figure 1
Typical Trim Kit Installation
Siemens Building Technologies, Inc.
8 Fernwood Road
Florham Park, New Jersey 0 932
Siemens Building Technologies
Fire Safety
Siemens Building Technologies, Ltd.
2 Kenview Boulevard
Brampton, Ontario L6T 5E4 CN
P/N 315-033013-1