Siemens Readme SIVArc User manual

Readme SIVArc V15.1 Update 3
Manual
09/08
Data protection 1
Improvements in V15.1
Update 3 2

Legal information
Warning notice system
This manual contains notices you have to observe in order to ensure your personal safety, as well as to prevent
damage to property. The notices referring to your personal safety are highlighted in the manual by a safety alert
symbol, notices referring only to property damage have no safety alert symbol. These notices shown below are
graded according to the degree of danger.
DANGER
indicates that death or severe personal injury will result if proper precautions are not taken.
WARNING
indicates that death or severe personal injury may result if proper precautions are not taken.
CAUTION
indicates that minor personal injury can result if proper precautions are not taken.
NOTICE
indicates that property damage can result if proper precautions are not taken.
If more than one degree of danger is present, the warning notice representing the highest degree of danger will be
used. A notice warning of injury to persons with a safety alert symbol may also include a warning relating to property
damage.
Qualified Personnel
The product/system described in this documentation may be operated only by personnel qualified for the specific
task in accordance with the relevant documentation, in particular its warning notices and safety instructions. Qualified
personnel are those who, based on their training and experience, are capable of identifying risks and avoiding
potential hazards when working with these products/systems.
Proper use of Siemens products
Note the following:
WARNING
Siemens products may only be used for the applications described in the catalog and in the relevant technical
documentation. If products and components from other manufacturers are used, these must be recommended or
approved by Siemens. Proper transport, storage, installation, assembly, commissioning, operation and
maintenance are required to ensure that the products operate safely and without any problems. The permissible
ambient conditions must be complied with. The information in the relevant documentation must be observed.
Trademarks
All names identified by ® are registered trademarks of Siemens AG. The remaining trademarks in this publication
may be trademarks whose use by third parties for their own purposes could violate the rights of the owner.
Disclaimer of Liability
We have reviewed the contents of this publication to ensure consistency with the hardware and software described.
Since variance cannot be precluded entirely, we cannot guarantee full consistency. However, the information in this
publication is reviewed regularly and any necessary corrections are included in subsequent editions.
Siemens AG
Division Digital Factory
Postfach 48 48
90026 NÜRNBERG
GERMANY
Ⓟ 08/2019 Subject to change
Copyright © Siemens AG 2019.
All rights reserved

Table of contents
1 Data protection .............................................................................................................................................5
2 Improvements in V15.1 Update 3 .................................................................................................................7
Readme SIVArc V15.1 Update 3
Manual, 09/08 3

Table of contents
Readme SIVArc V15.1 Update 3
4Manual, 09/08

Data protection 1
Siemens observes the principles of data protection, in particular the principle of data
minimization (privacy by design). This means for this SIMATIC product, the product does not
process / save any personal information.
Readme SIVArc V15.1 Update 3
Manual, 09/08 5

Data protection
Readme SIVArc V15.1 Update 3
6Manual, 09/08

Improvements in V15.1 Update 3 2
Contents of the update
Update 3 contains the following improvements and changes:
● The navigation buttons for an overflow screen are generated, and placed as per the layout
field configuration of a specific screen in master copy
● Evaluation of expression after renaming of static variable for multi instance call is improved
● Rule editor with multiple groups and rules is improved
Readme SIVArc V15.1 Update 3
Manual, 09/08 7

Improvements in V15.1 Update 3
Readme SIVArc V15.1 Update 3
8Manual, 09/08