Operating the appliance
Operating the appliance
W Risk of injury
– Before fitting/removing attachment, wait
until the drive has come to a standstill
and pull out the mains plug.
– Do not reach into the feed tube. Always
use the stuffer to push food down the
hole.
XFig. F
Stand the mincer on a clean, level work
surface.
Take power cord out of the cable
storage and pull out to the required
length.
Put the completely assembled mincer
attachment, inclined slightly to the right,
on the drive.
Turn mincer attachment upwards until it
engages.
Tighten threaded ring on the mincer
attachment.
Attach filling tray.
Insert pusher into filling opening.
Place a bowl or plate under the outlet
opening.
Insert the mains plug.
Switch appliance on with the On/Off
button.
Place the food to be processed in the
filling tray.
Only use the pusher when adding more
ingredients.
Application instructions:
If the food to be chopped up jams in the
worm gear: Use reverse button to remove
the blockage.
1. Switch appliance off with the On/Off
button.
2. Wait until the drive comes to a standstill.
3. Briefly press reverse button.
4. Wait until the drive comes to a standstill.
5. Switch appliance on with the On/Off
button.
After using the appliance:
Switch appliance off with the On/Off
button.
Remove mains plug.
Pull out the pusher.
Remove filling tray.
Remove the mincer attachment. Holding
down the release button, turn the
attachment to the right and remove.
Disassemble mincer attachment.
Clean all parts, see “Cleaning and
servicing”.
Shredding attachment
For shredding and slicing cheese, fruit,
vegetables, nuts, almonds, dried bread rolls
and pieces of bread, chocolate and other
hard foods.
W Risk of injury
– Before fitting/removing attachment, wait
until the drive has come to a standstill
and pull out the mains plug.
– Do not grip the sharp blades and edges
of the shredding and slicing inserts.
– Do not reach into the feed tube. Always
use the stuffer to push food down the
hole.
XFig. G
Place required insert in the housing of
the shredding attachment. The insert is
automatically locked when the appliance
is switched on.
Put the shredding attachment, inclined
slightly to the right, on the drive.
Turn shredding attachment upwards
until it engages.
Place a bowl or plate under the outlet
opening.
Insert the mains plug.
Place the food to be processed in the
feed tube.
Insert pusher and hold in place.
Note:
Pusher can be inserted in one direction
only. Note position of the curve!
Switch appliance on with the On/Off
button.
Press food down using the pusher.
Do not exert too much pressure!