Siemens SICAM Q80 User manual

E50417-B1074-C419-A2
Power Quality Recorder
SICAM Q80
s
Operating instruction
Document version 3.3 12.01.2015

E-3
Power Quality Recorder SICAM Q80 7KG8080, Operating instruction
E50417-B1074-C419-A2, Release 12.01.2015
Table of Contents
1 SICAM Q80 5
2 Preface 6
3 General notes 7
4 Safety and other notifications 8
5 Qualified personnel 9
6 Order data 10
7 Application 11
8 Glossary 13
9 System architecture 15
10 Assembly, Commissioning, Parameterization 19
11 Connections and Conditioning 35
12 Computations 49
13 Troubleshooting 65
14 Storage and Transporting 67
15 Technical specs and terminal configuration 69

E-5SICAM Q80
Power Quality Recorder SICAM Q80 7KG8080, Operating instruction
E50417-B1074-C419-A2, Release 12.01.2015
1 SICAM Q80
Note
Please observe the instructions and warnings for your safety in the later chapter "Safety and other
notifications ".
Note
This instruction manual contains important information on the SICAM Q80 7KG8080.
It comes standard with the product package. The statements made in this instruction manual are to
considered more binding than any conflicting statements.
Statement of Conformity
This product complies with the directive of the Council of the European Communities on the
approximation of the laws of the Member States relating to electromagnetic compatibility (EMC
Council Directive 2004/108/EC) and concerning electrical equipment for use within specified
voltage limits (Low voltage Directive 2006/95/EC).
This conformity has been established by means of tests conducted by Siemens AG in accordance
of the Council Directive in agreement with the standard IEC 61326-1:2006 for the EMC directives,
and with the standard EN 61010-1 for the low-voltage directive.
The device has been designed and produced for industrial use.
Document version 3.3
Release 12.01.2015
8

E-6 SICAM Q80 7KG8080
Power Quality Recorder SICAM Q80 7KG8080, Operating instruction
E50417-B1074-C419-A2, Release 12.01.2015
2 Preface
2.1 Disclaimer of Liability
We have checked the contents of this document and every effort has been made to ensure that the descriptions of
both hardware and software are as accurate as possible. However, since deviations cannot be ruled out entirely, we
do not accept liability for complete conformity or for any errors or omissions.
The information in this manual is checked periodically, and necessary corrections will be included in future editions.
We are grateful for any improvements that you care to suggest.
Subject to technical alterations.
2.2 Copyright
Copyright © Siemens AG 2015
This document shall not be transmitted or reproduced, nor shall its contents be exploited or disclosed to third parties
without prior written consent from SIEMENS. Offenders will be liable for damages. All rights, including rights created
by patent grant or registration of a utility model or design, are reserved.
2.3 Registered Trademarks
SIPROTEC®, is a registered trademark of SIEMENS AG. Other designations in this manual might be trademarks
whose use by third parties for their own purposes would infringe the rights of the owner.
Note
For more information, please see:
System manual SICAM Q80 7KG8080,
E50417-H1076-C420-A2 (English)
E50417-H1000-C420-A2 (German)

E-7General notes
Power Quality Recorder SICAM Q80 7KG8080, Operating instruction
E50417-B1074-C419-A2, Release 12.01.2015
3 General notes
These operating instructions contain necessary information for the proper use of the devices descried. The
instructions are targeted at technically qualified personnel possessing special training or relevant skills in the area of
automation technology.
Such knowledge, as well as proper implementation of the safety guidelines and warnings presented in the instructions
are the conditions for danger-free installation and commissioning as well as for safe operation and correct
maintenance of the devices described. Only qualified personnel (see chapter 4) possess the necessary skills to be
able to correctly interpret and apply the generally valid statements in this document to specific cases.
These instructions are standard included with the product package. Nevertheless, it can not possibly foresee and
reflect all possible details pertaining to every version of the devices described or cover every possible situation
involving setup, operation, or maintenance of the devices.
If you desire further information, or if special problems arise which are not adequately covered in this manual, you can
order the manual named in chapter 1.
Additionally, you can obtain further information from your local Siemens representative or from the following hotline:
Tel.: [phone]
Fax: [phone]
E-Mail: [e-mail]
FAQ: www.siemens.com/energy/support-faq
We also point out that the contents of this instruction manual is not part of any former or existing agreement,
commitment or legal relationship nor are intended to change any. Any obligations on the part of Siemens result
exclusively from the applicable sales contract, which also states the sole valid guarantee agreement. The guarantee
contract is unaffected by the contents of this document.

E-8 SICAM Q80 7KG8080
Power Quality Recorder SICAM Q80 7KG8080, Operating instruction
E50417-B1074-C419-A2, Release 12.01.2015
4 Safety and other notifications
This instruction manual does not contain a complete collection of all safety procedures needed for operating the
devices, since special operational conditions can make additional steps necessary.
However, these instructions do contain information which you must observe for your own safety and in order to avoid
damage to property. This information is sometimes highlighted by a warning triangle and appear as shown below, to
reflect the degree of danger:
Danger
indicates that death, severe personal injury or substantial property damage can result if proper
precautions are not taken.
Warning
indicates that death, severe personal injury or substantial property damage can result if proper
precautions are not taken.
Caution
indicates that minor personal injury or property damage can result if proper precautions are not
taken. This particularly applies to damage on or in the device itself and consequential damage
thereof.
Attention
indicates that property damage can result if proper precautions are not taken.
Note
indicates information about the device or respective part of these operating instructions which is
essential to highlight.

E-9Qualified personnel
Power Quality Recorder SICAM Q80 7KG8080, Operating instruction
E50417-B1074-C419-A2, Release 12.01.2015
5 Qualified personnel
Qualified personnel
Commissioning and operation of the equipment (module, device) described in this manual may
only be performed by qualified personnel. Qualified personnel, in the context of the safety
information contained in this manual, are persons authorized to commission, start-up, ground and
label devices, systems and circuits according to all applicable safety standards.
Use for the intended purpose
The equipment (device, module) may only be used for the applications specified in the catalog and
the technical manual, and only in connection with OEM devices and components recommended
and approved by SIEMENS.
The prerequisites for trouble-free, reliable operation of the product include proper transport, proper
storage, proper installation and assembly, as well as proper operation and maintenance.
When operating electrical equipment, certain parts of this equipment are subject to dangerous
voltage levels. Therefore, improper handling can result in serious injury or equipment damage:
The equipment must be grounded at the PG terminal before making any connections
whatsoever.
Dangerous voltages may occur in all circuit components connected to the inputs or power
supply.
Dangerous voltages due to capacitor memory may still exist in the equipment even after it
has been disconnected from the power supply or input circuits.
Equipment with current transformer circuits must never be operated in any state where
the current transformer circuits are open-circuited.
The operating limits specified in the manual and in the operating instructions must not be
exceeded at any time (including inspection and commissioning).
The parameter value limits stated in the instructions may not be exceeded; this also applies to
inspection and commissioning situations.

E-10 SICAM Q80 7KG8080
Power Quality Recorder SICAM Q80 7KG8080, Operating instruction
E50417-B1074-C419-A2, Release 12.01.2015
6 Order data
Order processing form:
Description
Order No.
SICAM Q80 Power Quality Recorder
4 x U, 4 x I
Power supply: 12 V to 60 V DC
7KG8080 - 0 A A 0 0 - 0 A A 0
4 x U, 4 x I
Power supply: 110 V to 250 V DC / 100 V to 230 V AC
7KG8080 - 0 B A 0 0 - 0 A A 0
8 x U
Power supply: 12 V to 60 V DC
7KG8080 - 1 A A 0 0 - 0 A A 0
8 x U
Power supply: 110 V to 250 V DC / 100 V to 230 V AC
7KG8080 - 1 B A 0 0 - 0 A A 0
4 x U, 4 x I, IEC 61000-4-30, Class A
2 GB compact flash
Power supply: 12 V to 60 V DC
110 V to 250 V DC / 100 V to 230 V AC
Power consumption: < 12 W
For requirement for alternating voltages and continuous voltages higher than
60 V, we recommend, for example SITOP 6EP1332-1SH12/24 V; 2.5 A or
compatible
Ethernet- and modem interface
Operating instructions: English and German
Accessories for connecting to the synchronization input:
Sync-Transceiver, MLFB 7XV5654-0BA00 or
Garmin (18 LVC-5Hz) or
Meinberg GPS180AHSx or
Hopf Receiver 6875-FW7.0: 7XV5664-0CA00 (see SIPROTEC Price list 2009)
SICAM Q80 Manager )Software)
7KG 8081 - 0 A A 0 0 - 0 A A 0
Device configuration
Measurement control
Power quality report (acc. to EN 50160)
Data base
Software language: English/ German
System manual: English/ German as PDF on DVD
Ethernet patch cable for parameterization
7KE60008 G E A 0 - 3 A A 0
with double shield (SFTP),
cross over connection LAN connector on both sides SICAM Q80 <-> PC
Extra printed system manual
German
E50417-H1000-C420-A2
English
E50417-H1076-C420-A2