Siemens SITRANS L User manual

Edition 10/2022
Operating Instructions
SITRANS L
Radar Transmitters
SITRANS LR150
https://www.siemens.com/processautomation

SITRANS L
Radar Transmitters
SITRANS LR150
Operating Instructions
Preface
Introduction 1
Safety notes 2
Description 3
Installing/mounting 4
Connecting 5
Access protection 6
Setup with the integrated
HMI 7
Setup with smart device
(Bluetooth) 8
Setup with PC/notebook
(HART modem) 9
Operating 10
Setup with
SIMATICPDMEDD 11
Diagnostics and
troubleshooting 12
Service and maintenance 13
Certificates and approvals 14
Technical data and
dimensions 15
10/2022
62711-76-01

Legal Information
Warning Notice System
This manual contains notices you have to observe in order to ensure your personal safety, as well as to prevent
damage to property. The notices referring to your personal safety are highlighted in the manual by a safety
alert symbol, notices referring only to property damage have no safety alert symbol. These notices shown
below are graded according to the degree of danger.
DANGER
indicates that death or severe personal injury will result if proper precautions are not taken.
WARNING
indicates that death or severe personal injury may result if proper precautions are not taken.
CAUTION
indicates that minor personal injury can result if proper precautions are not taken.
NOTICE
indicates that property damage can result if proper precautions are not taken.
If more than one degree of danger is present, the warning notice representing the highest degree of danger
will be used. A notice warning of injury to persons with a safety alert symbol may also include a warning
relating to property damage.
Qualified Personnel
The product/system described in this documentation may be operated only by personnel qualified for the
specific task in accordance with the relevant documentation, in particular its warning notices and safety
instructions. Qualified personnel are those who, based on their training and experience, are capable of
identifying risks and avoiding potential hazards when working with these products/systems.
Proper Use of Siemens Products
Note the following:
WARNING
Siemens products may only be used for the applications described in the catalog and in the relevant
technical documentation. If products and components from other manufacturers are used, these must be
recommended or approved by Siemens. Proper transport, storage, installation, assembly, commissioning,
operation and maintenance are required to ensure that the products operate safely and without any
problems. The permissible ambient conditions must be complied with. The information in the relevant
documentation must be observed.
Trademarks
All names identified by ® are registered trademarks of Siemens AG. The remaining trademarks in this
publication may be trademarks whose use by third parties for their own purposes could violate the rights of
the owner.
Disclaimer of Liability
We have reviewed the contents of this publication to ensure consistency with the hardware and software
described. Since variance cannot be precluded entirely, we cannot guarantee full consistency. However, the
information in this publication is reviewed regularly and any necessary corrections are included in subsequent
editions.
Measurement Intelligence
Process Automation
76181, Karlsruhe
Germany
62711-76-01
A5E50352155
© 10/2022 Subject to change
Copyright © Siemens 2022
All rights reserved

Table of Contents
Preface .......................................................................................................................................... vii
1 Introduction ........................................................................................................................... 1
1.1 Function ................................................................................................................ 1
1.2 Target group ......................................................................................................... 1
1.3 Symbols used ........................................................................................................ 1
2 Safety notes .......................................................................................................................... 3
2.1 Authorised personnel ............................................................................................ 3
2.2 Appropriate use .................................................................................................... 3
2.3 Warning about incorrect use ................................................................................. 3
2.4 General safety instructions .................................................................................... 3
2.5 Radar frequencies for worldwide use ..................................................................... 4
2.6 Installation and operation in the USA and Canada ................................................. 4
2.7 Security information .............................................................................................. 4
3 Description ............................................................................................................................ 7
3.1 Configuration ........................................................................................................ 7
3.2 Principle of operation ............................................................................................ 8
3.3 Adjustment ........................................................................................................... 9
3.4 Packaging, transport and storage ........................................................................ 10
4 Installing/mounting ............................................................................................................. 13
4.1 General instructions ............................................................................................ 13
4.2 Mounting instructions ......................................................................................... 13
4.3 Measurement setup - Flow .................................................................................. 17
5 Connecting .......................................................................................................................... 21
5.1 Preparing the connection .................................................................................... 21
5.2 Connecting .......................................................................................................... 22
5.3 Wiring plan ......................................................................................................... 23
5.4 Connecting HMI to electronic module .................................................................. 24
5.5 Switch-on phase .................................................................................................. 24
6 Access protection ................................................................................................................ 25
6.1 Bluetooth radio interface ..................................................................................... 25
6.2 Protection of the parameterization ...................................................................... 25
SITRANS LR150
Operating Instructions, 10/2022, 62711-76-01, A5E50352155 iii

Table of Contents
7 Setup with the integrated HMI ........................................................................................... 27
7.1 Adjustment system .............................................................................................. 27
7.2 Structure and views of the display ....................................................................... 28
7.3 Menu overview ................................................................................................... 31
7.4 Parameterization ................................................................................................. 36
7.5 Quick setup ......................................................................................................... 36
7.5.1 Wizards for quick setup ....................................................................................... 36
7.5.2 Quick setup level, space, distance ....................................................................... 38
7.5.3 Quick setup volume ............................................................................................ 40
7.5.4 Quick setup volume flow ..................................................................................... 43
7.5.5 Quick setup auto false echo suppression ............................................................. 46
7.6 Application examples .......................................................................................... 47
7.6.1 Application example level .................................................................................... 47
7.6.2 Application example volume flow ........................................................................ 48
7.7 Settings ............................................................................................................... 49
7.7.1 Selection HART variable ....................................................................................... 49
7.7.2 Transmitter ......................................................................................................... 50
7.7.3 Adjustment ......................................................................................................... 50
7.7.4 Current output .................................................................................................... 51
7.7.5 Volume ............................................................................................................... 52
7.7.6 Volume flow ....................................................................................................... 53
7.7.7 Custom ............................................................................................................... 55
7.7.8 Display ................................................................................................................ 56
7.8 Maintenance and diagnostics .............................................................................. 56
7.8.1 Signal .................................................................................................................. 56
7.8.2 Peak values ......................................................................................................... 58
7.8.3 Circuit test .......................................................................................................... 59
7.8.4 Resets ................................................................................................................. 60
7.8.5 Frequency ........................................................................................................... 61
7.9 Communication ................................................................................................... 62
7.9.1 HART address ...................................................................................................... 62
7.10 Safety ................................................................................................................. 62
7.10.1 user PIN .............................................................................................................. 62
7.10.2 Bluetooth PIN ...................................................................................................... 62
8 Setup with smart device (Bluetooth) .................................................................................. 65
8.1 Connecting .......................................................................................................... 65
9 Setup with PC/notebook (HART modem) ............................................................................ 67
9.1 Saving the parameterization data ........................................................................ 67
10 Operating ............................................................................................................................. 69
11 Setup with SIMATICPDMEDD ............................................................................................ 75
11.1 Setup with SIMATICPDMEDD ............................................................................. 75
iv SITRANS LR150
Operating Instructions, 10/2022, 62711-76-01, A5E50352155

Table of Contents
12 Diagnostics and troubleshooting ........................................................................................ 79
12.1 Maintenance ....................................................................................................... 79
12.2 Rectify faults ....................................................................................................... 79
12.3 Diagnosis, fault messages ................................................................................... 80
12.4 Status messages according to NE107 ................................................................. 80
12.5 Treatment of measurement errors ....................................................................... 84
12.6 Return procedure ................................................................................................ 88
12.7 Technical support ................................................................................................ 89
12.8 How to proceed if a repair is necessary ............................................................... 90
13 Service and maintenance .................................................................................................... 91
13.1 Dismounting steps .............................................................................................. 91
13.2 Disposal .............................................................................................................. 91
14 Certificates and approvals .................................................................................................. 93
14.1 Radio licenses ..................................................................................................... 93
14.2 Approvals for Ex areas ......................................................................................... 93
14.3 Ship approvals ..................................................................................................... 93
14.4 Approvals as overfill protection ........................................................................... 93
14.5 Food and pharmaceutical certificates ................................................................... 94
14.6 Conformity .......................................................................................................... 94
14.7 NAMUR recommendations ................................................................................... 94
15 Technical data and dimensions .......................................................................................... 95
15.1 Technical data ..................................................................................................... 95
15.2 Dimensions ....................................................................................................... 100
15.3 Licensing information for open source software ................................................ 100
15.4 Trademark ......................................................................................................... 100
SITRANS LR150
Operating Instructions, 10/2022, 62711-76-01, A5E50352155 v

Table of Contents
vi SITRANS LR150
Operating Instructions, 10/2022, 62711-76-01, A5E50352155

Preface
Safety instructions for Ex areas:
WARNING
Take note of the Ex specific safety instructions for Ex applications. These instructions
are attached as documents to each transmitter with Ex approval and are part of the
operating instructions.
Editing status: 2022-10-26
SITRANS LR150
Operating Instructions, 10/2022, 62711-76-01, A5E50352155 vii

Preface
viii SITRANS LR150
Operating Instructions, 10/2022, 62711-76-01, A5E50352155

Introduction 1
1.1 Function
This instruction provides all the information you need for mounting, connection
and setup as well as important instructions for maintenance, fault rectification,
the exchange of parts and the safety of the user. Please read this information
before putting the transmitter into operation and keep this manual accessible in the
immediate vicinity of the device.
1.2 Target group
This operating instructions manual is directed to trained personnel. The contents of
this manual must be made available to the qualified personnel and implemented.
1.3 Symbols used
Information, note, tip: This symbol indicates helpful additional
information and tips for successful work.
Note: This symbol indicates notes to prevent failures,
malfunctions, damage to devices or plants.
Caution: Non-observance of the information marked with this
symbol may result in personal injury.
Warning: Non-observance of the information marked with this
symbol may result in serious or fatal personal injury.
Danger: Non-observance of the information marked with this
symbol results in serious or fatal personal injury.
Ex applications
This symbol indicates special instructions for Ex applications.
• List
The dot set in front indicates a list with no implied sequence.
SITRANS LR150
Operating Instructions, 10/2022, 62711-76-01, A5E50352155 1

Introduction
1.3Symbols used
1 Sequence of actions
Numbers set in front indicate successive steps in a procedure.
Disposal
This symbol indicates special instructions for disposal.
2SITRANS LR150
Operating Instructions, 10/2022, 62711-76-01, A5E50352155

Safety notes 2
2.1 Authorised personnel
All operations described in this documentation must be carried out only by trained,
qualified personnel authorised by the plant operator.
During work on and with the device, the required personal protective equipment
must always be worn.
2.2 Appropriate use
SITRANS LR150 is a transmitter for continuous level measurement.
You can find detailed information about the area of application in chapter " Product
description".
Operational reliability is ensured only if the transmitter is properly used according
to the specifications in the operating instructions manual as well as possible
supplementary instructions.
2.3 Warning about incorrect use
Inappropriate or incorrect use of this product can give rise to application-specific
hazards, e.g. vessel overfill through incorrect mounting or adjustment. Damage to
property and persons or environmental contamination can result. Also, the protective
characteristics of the transmitter can be impaired.
2.4 General safety instructions
This is a state-of-the-art transmitter complying with all prevailing regulations and
directives. The transmitter must only be operated in a technically flawless and
reliable condition. The operator is responsible for the trouble-free operation of
the transmitter. When measuring aggressive or corrosive media that can cause a
dangerous situation if the transmitter malfunctions, the operator has to implement
suitable measures to make sure the transmitter is functioning properly.
The safety instructions in this operating instructions manual, the national installation
standards as well as the valid safety regulations and accident prevention rules must
be observed by the user.
For safety and warranty reasons, any invasive work on the device beyond that
described in the operating instructions manual may be carried out only by personnel
SITRANS LR150
Operating Instructions, 10/2022, 62711-76-01, A5E50352155 3

Safety notes
2.5Radar frequencies for worldwide use
authorised by the manufacturer. Arbitrary conversions or modifications are explicitly
forbidden. For safety reasons, only the accessory specified by the manufacturer must
be used.
To avoid any danger, the safety approval markings and safety tips on the device must
also be observed.
The low transmitting power of the radar transmitter is far below the internationally
approved limits. No health impairments are to be expected with intended use. The
band range of the measuring frequency can be found in chapter " Technical data".
2.5 Radar frequencies for worldwide use
Country specific settings for the radar signals are determined via the frequency. The
operating mode must be set in the operating menu via Sitrans mobile IQ App at the
beginning of the setup.
WARNING
Operating the device without selecting the frequency for the appropriate country
group constitutes a violation of the regulations of the radio approvals of the
respective country.
2.6 Installation and operation in the USA and Canada
This information is only valid for USA and Canada. Hence the following text is only
available in the English language.
Installations in the US shall comply with the relevant requirements of the National
Electrical Code (ANSI/NFPA70).
Installations in Canada shall comply with the relevant requirements of the Canadian
Electrical Code.
2.7 Security information
Siemens provides products and solutions with industrial security functions that
support the secure operation of plants, systems, machines and networks.
To protect plants, systems, machines and networks against cyber threats, it is
necessary to implement (and continuously maintain) a holistic, state-of-the-art
industrial security concept. Siemens products and solutions constitute one element
of such a concept.
Customers are responsible for preventing unauthorized access to their plants,
systems, machines and networks. Such systems, machines and components should
only be connected to an enterprise network or the internet if and to the extent
such a connection is necessary and only when appropriate security measures (e.g.
firewalls and/or network segmentation) are in place.
4SITRANS LR150
Operating Instructions, 10/2022, 62711-76-01, A5E50352155

Safety notes
2.7Security information
For additional information on industrial security measures that may be implemented,
please visit https://www.siemens.com/industrialsecurity
Siemens products and solutions undergo continous development to make them
more secure. Siemens strongly recommends that product updates are applied as
soon as they are available and that the latest product versions are used. Use of
product versions that are no longer supported, and failure to apply the latest updates
may increase customer’s exposure to cyber threats.
To stay informed about product updates, subscribe to the Siemens Industrial Security
RSS Feed under: https://www.siemens.com/industrialsecurity
SITRANS LR150
Operating Instructions, 10/2022, 62711-76-01, A5E50352155 5

Safety notes
2.7Security information
6SITRANS LR150
Operating Instructions, 10/2022, 62711-76-01, A5E50352155

Description 3
3.1 Configuration
Scope of delivery
The scope of delivery encompasses:
• SITRANS LR150 radar transmitter
• Information sheet " Documents and software" with:
• Transmitter serial number
• QR code with link for direct scanning
• Information sheet " Device Bluetooth and Parameter Access Codes" with:
• Bluetooth PIN
• Bluetooth PUK
• Device Access PUK
The further scope of delivery encompasses:
• Documentation
• Ex-specific " Safety instructions" (with Ex versions)
• Radio licenses
• If necessary, further certificates
Note
Optional transmitter features are also described in this operating instructions
manual. The respective scope of delivery results from the order specification.
Scope of this operating instructions
This operating instructions manual applies to the following transmitter versions:
• Hardware version from 1.3.1
• Software version from 1.2.3
SITRANS LR150
Operating Instructions, 10/2022, 62711-76-01, A5E50352155 7

Description
3.2Principle of operation
Constituent parts
1 Radar antenna
2 Process fitting
3 Process seal (G type threaded connections only)
4 Electronics housing
5 Display and adjustment unit
6 Ventilation/pressure compensation
Figure3.1 Components of SITRANS LR150 (Example process fitting G1½)
Nameplate
The nameplate contains the most important data for identification and use of the
transmitter.
1 Transmitter type
2 Serial number
3 Technical data
4 Field for approvals
5 QR code for device documentation
6 Wireless access via smart device
Figure3.2 Layout of the nameplate (example)
3.2 Principle of operation
Application area
SITRANS LR150 is a radar transmitter for non-contact, continuous level
measurement. It is suitable for liquids and solids in practically all industries.
8SITRANS LR150
Operating Instructions, 10/2022, 62711-76-01, A5E50352155

Description
3.3Adjustment
Functional principle
The transmitter emits a continuous, frequency-modulated radar signal through its
antenna. The emitted signal is reflected by the medium and received by the antenna
as an echo with modified frequency. The frequency change is proportional to the
distance and is converted into the level.
3.3 Adjustment
Local adjustment
On-site adjustment of the device is carried out via the optionally integrated HMI.
Wireless adjustment
Devices with integrated Bluetooth module can be adjusted wirelessly via
SiemensmobileIQapp.
1 Transmitter
2 Smart device
Figure3.3 Wireless connection to standard operating devices with integrated BluetoothLE
Adjustment via the signal cable
Devices with signal output 4…20mA/HART can also be operated via a signal cable.
This is done via an interface adapter and a PC/notebook using SIMATICPDM.
SITRANS LR150
Operating Instructions, 10/2022, 62711-76-01, A5E50352155 9

Description
3.4Packaging, transport and storage
1 Transmitter
2 HART resistance 250Ω (optional depending on evaluation)
3 Control system
4 Handheld
Figure3.4 Connecting the PC to the signal cable
3.4 Packaging, transport and storage
Packaging
Your transmitter was protected by packaging during transport. Its capacity to handle
normal loads during transport is assured by a test based on ISO4180.
The packaging consists of environment-friendly, recyclable cardboard. For special
versions, PE foam or PE foil is also used. Dispose of the packaging material via
specialised recycling companies.
Transport
Transport must be carried out in due consideration of the notes on the transport
packaging. Nonobservance of these instructions can cause damage to the device.
Transport inspection
The delivery must be checked for completeness and possible transit damage
immediately at receipt. Ascertained transit damage or concealed defects must be
appropriately dealt with.
Storage
Up to the time of installation, the packages must be left closed and stored according
to the orientation and storage markings on the outside.
Unless otherwise indicated, the packages must be stored only under the following
conditions:
10 SITRANS LR150
Operating Instructions, 10/2022, 62711-76-01, A5E50352155

Description
3.4Packaging, transport and storage
• Not in the open
• Dry and dust free
• Not exposed to corrosive media
• Protected against solar radiation
• Avoiding mechanical shock and vibration
Storage and transport temperature
• Storage and transport temperature see chapter " Supplement - Technical data -
Ambient conditions"
• Relative moisture 20…85%
SITRANS LR150
Operating Instructions, 10/2022, 62711-76-01, A5E50352155 11