Sierra Wireless USBConnect Lightning User manual

AT&T USBConnect
Lightning
Quickstart
L
L
i
i
g
g
g
g
h
h
h
t
t
t
n
n
n
n
i
i
i
i
n
n
n
n
g
g
g
g
g
Q

2
Welcome to AT&T
Please use this Quickstart to get a brief
overview of the major features and services
available with your new LaptopConnect
service.
Or take advantage of our interactive web
tutorials at:
att.com/Tutorials
for the most complete and up-to-date
information available for setting up your new
device and services. These online tutorials
include step-by-step instructions and screen
shots to assist as well as providing an easy
search function.
Thanks again for choosing AT&T.

3
Table of Contents
Three steps to get connected 4
What’s in the box? 5
Getting Started 6
Insert the SIM card 6
Insert the Lightning into the USB port 7
Windows 7, Vista and XP 8
Install the software 8
Connect to the AT&T network and access the Internet 8
AT&T Communication Manager 9
Using AT&T Communication Manager 10
Manage your DataConnect Usage Online 12
How much data am I using? 13
Using AT&T Communication Manager for Wi-Fi 14
To use AT&T Wi-Fi service 14
To connect to other Wi-Fi networks 15
Mac OS X 16
Install the software 16
Connect to the AT&T network and access the Internet 17
Using your Lightning on a Mac 17
Using the USB Extension Cable and Clip 18
Getting to Know Your Device 19
Using a Memory Card 20
Frequently Asked Questions 21
Troubleshooting Your Device 22
Find More Information 24

3
1
2
4
Three steps to get connected
Insert the SIM card (see page 6)
Insert the Lightning into your laptop
(see pages 7–8, 16)
Start the Communication Manager and
click Connect (see page 8, 17)
Slide out the tray, place the SIM card in the tray, and
slide the tray back into the USBConnect Lightning.
Some procedures differ for Mac users. For Mac installation,
see pages 16 and 17.
The software installation process
begins automatically and installs
AT&T Communication Manager
software.
Double-click the shortcut icon.
After the Communication Manager detects
the network, click the Connect button.

5
3
1
2
Your package contains:
AT&T USBConnect Lightning
Quickstart
What’s in the box?
USB cable and clip
Using the USB cable and clip is optional. See page 18
for additional information.
AT&T USBConnect
Lightning
Quickstart
Q

6
AT&T SIM card
The SIM card stores the Mobile num-
ber for your Lightning and subscriber
information enabling access to the AT&T
network.
AT&T USBConnect Lightning
The Lightning sends and receives data
between your laptop and the AT&T
network.
The Lightning includes the necessary
software for your Windows and Mac lap-
top and will begin to auto-install when
inserted for the first time.
To get started, you need 5 to 8 minutes (depending on your
computer) and the following:
Getting Started
Insert the SIM card
1. Open the flap on the side of the
USBConnect Lightning.
2. Grasp the end of the SIM card tray and
slide it out.
3. Place the SIM card in the tray,
with the SIM card notch in the
outer right-hand corner.
4. Slide the SIM card tray back
into the modem.

7
1. Flip open the USB connector and adjust the angle to
match the orientation of the USB port on your laptop.
Insert the Lightning into the USB port
2. Carefully push the Lightning into the USB port on your
laptop.
For instructions on using the optional USB extension cable
and clip to connect the Lightning to the laptop, see page 18.
180

8
4. Open your browser and access the Internet. Click the
Connect button to end your session.
3. Click the gray Connect button.
1. Double-click the ACM shortcut icon installed on your
desktop.
2. Wait while the USBConnect Lightning initiates.
Windows 7, Vista, and XP*
* If you are running Mac OS X, go to
page 16. If you are running Windows
2000, visit www.att.com/acm.
1. After you insert the Lightning into the laptop for the first
time, the AT&T Communication Manager (ACM) software
automatically starts and guides you through the installa-
tion process.
2. Once installation is complete, restart your laptop when
prompted.
Install the software
Connect to the AT&T network and access
the Internet
Once connected, the Connect button turns orange and
moves to the right.

9
8
7
6
2
4
5
9
1
3Connect buttons
To make the best use of your LaptopConnect service, please
take some time to familiarize yourself with the following
features of the ACM application.
AT&T Communication Manager
Current
session
data used
Connection status
Signal
strength
3G
Indicator
Wi-Fi
network
interface
Mobile
network
interface
Carrier
Cumulative total data used
AT&T Communication Manager (ACM) is a software applica-
tion that lets you control your connections to either the
AT&T mobile network or available Wi-Fi networks, including
thousands of AT&T hotspots, using the built-in Wi-Fi capabil-
ity of your laptop. ACM offers a range of tools and features
to manage connections, find the best connection available
and connect quickly. Please note that connections to the
AT&T mobile network require an active SIM card inserted into
your Lightning and a valid AT&T data plan.
10 Mobile number

10
1. Mobile network interface
The Mobile network portion of the main window allows you
to control your connection to mobile networks worldwide.
2. Wi-Fi network interface
The Wi-Fi network section of the main window allows you
to control your connections with Wi-Fi networks, including
home, office, and public hotspot networks. See page 14 for
more information on using Wi-Fi with ACM.
3. Connect buttons
To connect to a mobile or Wi-Fi network, click the gray
Connect button in the Mobile or Wi-Fi section of the main
window. The button moves to the center and turns blue
while the modem is connecting to the network. When the
connection is established, the button moves to the right and
turns orange. Click the orange button to disconnect from the
network.
4. Cumulative total data used
The total data counter shows the amount of data sent since
the counter was last reset. To show the total, go to Tools >
Diagnostics > Event Viewer and set the desired options.
Being able to view the total helps you avoid going over your
monthly limit. Be sure to return to the Event Viewer
Advanced tab to click Clear Event Log each month when
your new bill cycle starts. For more information on interpret-
ing the amounts of data used, see Frequently Asked Ques-
tions on page 21.
Using AT&T Communication
Manager