SIGMA TEK C-IPC User manual

C-IPC EXPANSION CARD
C-IPC Expansion card
With the expansion card the C-IPC can be expanded with up to 4 further interfaces. The
special design allows an easy installation and fixation of the expansion card.
The delivery of the expansion card also includes the corresponding cover and fixing
material!
16.04.2010 Page 1

C-IPC EXPANSION CARD
Specification
Periphery connection via SO-DIMM socket
Fixing 2 x M2x4 cheese head screw with serrated lock washer DIN 6798-A 2,2
Standardization UL (E247993)
COM3 COM4Article numbers
(Version)
LPT
RS23
2
RS4XX MDB RS23
2
RS4XX TTY
Ethernet
01-460-011 YES
01-460-021 YES YES YES
01-460-031 YES YES YES YES
01-460-041 YES
Page 2 16.04.2010
b

C-IPC EXPANSION CARD
Mechanical dimensions
16.04.2010 Page 3

C-IPC EXPANSION CARD
Connections
X4, Ethernet 2
X1, LPT1
X2, COM3
X3, COM4
Page 4 16.04.2010
a

C-IPC EXPANSION CARD
Pin assignment
Expansion card
X1: LPT1 (26-pole HD-DSUB plug, angled)
26-pole DSUB plug
1
X2: COM 3 (6-pole Weidmüller)
This table shows all opportunities, the final mounting is specified in ta-
ble „Specification“!
Terminal RS 232 RS 422 RS485 Multi-Drop bus
1 RxD TxA A n.c.
2 RTS TxB B Comm. Common (GND)
3 TxD RxA (A) DC Power Return (GND)
4 CTS RxB (B) Master Transmit
5 DTR n.u. n.u. + 34 VDC
6 GND GND GND Master Receive
12
65
Pin LPT FDD Pin LPT FDD
1 Data Strobe n.u. 14 Autofeed Density Select
2 Data 0 Index 15 Error Head Select
3 Data 1 Track 0 16 Init Direction
4 Data 2 Write Protect 17 Select Input Step
5 Data 3 RData 18 GND GND
6 Data 4 Disk Change 19 GND GND
7 Data 5 n.u. 20 GND GND
8 Data 6 Motor 0 21 GND GND
9 Data 7 Drive 0 22 GND GND
10 Acknowledge Drive 1 23 GND GND
11 Busy Motor 1 24 do not connect (GND)
12 Paper out WData 25 +5 V +5 V
13 Select WGate 26 +5 V +5 V
16.04.2010 Page 5
b

C-IPC EXPANSION CARD
X3: COM 4 (6-pole Weidmüller)
12
65
This table shows all opportunities, the final mounting is specified in
table „Specification“!
X4: Ethernet 2 (8 pole RJ45)
81
Multi-Drop bus (MDB) supply
Terminal RS232 RS 422 RS 485 TTY 20 mA
1 RxD TxA A Tx+
2 RTS TxB B Tx-
3 TxD RxA (A) Rx+
4 CTS RxB (B) Rx-
5 DTR n.u. n.u. 20 mA
6 GND GND GND GND
Pin Function
1 TD+
2 TD–
3 RD+
4 n.c.
5 n.c.
6 RD–
7 n.c.
8 n.c.
Pin Function
1 +24 V supply
2 GND
1
Page 6 16.04.2010
b

C-IPC EXPANSION CARD
Ethernet cable connection
Twisted pair cable connection (expansion card to a HUB)
81
Both ends of the network cable have this assignment (not cross-linked).
It's badly recommended to use this assignment, otherwise the impedance of the network
cable is incorrect and the maximum cable length of 100 m cannot be reached!
Twisted pair cable connection (expansion card to other Ethernet devices)
81
At direct connection without HUB the network cable has to be cross-linked. Therefore both
ends have a different assignment (Tx/Rx cross-linked).
It's badly recommended to use this assignment, otherwise the impedance of the network
cable is incorrect and the maximum cable length of 100 m cannot be reached!
Pin Function Cable (both sides)
1 Tx+ Orange
2 Tx- Orange/white
3 Rx+ Green
4 not assigned Blue
5 not assigned Blue/white
6 Rx- Green/white
7 not assigned Brown
8 not assigned Brown/white
Pin Function (side 1) Cable (side 1) Cable (side 2)
1 Tx+ Orange Green
2 Tx- Orange/white Green/white
3 Rx+ Green Orange
4 not assigned Blue Blue
5 not assigned Blue/white Blue/white
6 Rx- Green/white Orange/white
7 not assigned Brown Brown
8 not assigned Brown/white Brown/white
16.04.2010 Page 7

C-IPC EXPANSION CARD
Installation, respectively, removal of the expansion card
Especially at installation of the expansion card the following procedure must be noticed:
- First plug the card sloping into the SO-DIMM socket,
- afterwards press the card into the socket clamp
- and finally screw it with the cheese head screw and the serrated lock washer on the pe-
riphery!
The removal is executed contrary:
- First screw-off the card from the periphery,
- afterwards fold the card forward to free it from the socket clamp
- and finally unplug the card out of the SO-DIMM socket!
Page 8 16.04.2010

C-IPC EXPANSION CARD
Assembly of the cover plate
Put the cover plate vertically on the C-IPC, stick the pins into the cuts and screw on the
expansion card.
16.04.2010 Page 9

C-IPC EXPANSION CARD
Page 10 16.04.2010