SignaMax 065-7032A User manual

User‘s Guide
16 Port Nway
Fast Ethernet Switch
Model :065-7032A

SIGNAMAX LLC • www.signamax.eu
FCC Warning
This device has been tested and found to comply with limits for a
Class B digital device, pursuant to Part 2 and 15 of FCC Rules.
These limits are designed to provide reasonable protection
against harmful interference when the equipment is operated in a
commercial environment. This equipment generates and
radiates radio frequency energy and, if not installed and used in
accordance with the user’s manual, it may cause interference in
which case users will be required to correct interference at their
own expenses.
CE Warning
This is a Class B product. In a domestic environment, this
product may cause radio interference in which case the user may
be required to take adequate measures.

SIGNAMAX LLC • www.signamax.eu
Introduction
065-7032A switch provides 16 10/100M ports. 065-7032A switch
was designed for easy installation and high performance in an
environment where traffic is on the network and the number of
users increases continuously.
The small compact palm size was specifically designed for small
to medium workgroups. 065-7032A switch can be installed where
space is limited; moreover, it provides smooth network migration
and easy upgrade to network capacity.

SIGNAMAX LLC • www.signamax.eu
Package Contents
Before you start to install this switch, please verify your package
that contains the following items:
One 065-7032A Fast Ethernet Switch
One Power Adapter
One CD with User’s Manual
Note: If any of these items is found missing or damaged, please
contact your local supplier for replacement.

SIGNAMAX LLC • www.signamax.eu
Key Features
16 Port 10/100M Nway (Auto-negotiation) Switch
Palm size with metal case
Auto-learn of networking configurations
Auto-detect full/half-duplex modes for any port
Dedicated full-duplex 200Mbps bandwidth
Store-and-Forward switching methods
IEEE 802.3x flow control for full-duplex and back-pressure
flow control for half-duplex
Non-blocking & Non-head-of-line blocking full wire speed
forwarding
Auto-MDI/MDI-X function for any port
Smart plug & play
Power
Power is supplied through an external DC power adapter.

SIGNAMAX LLC • www.signamax.eu
Front Panel (LEDs)
LED Indicators of 16 Port 10/100M Switch
LED Status Operation
On Power is on.Power
Off Power is off.
On Port is for connection
Off No connection.
LINK/ACT
Flashing
Data is transmitting or
receiving.
On Port is on 100M status.10/100M
Off Port is on 10M status.
Rear Panel (Connections)
This switch provides automatic crossover detection functionality
for any port. It is simple and friendly to up-link to another switch
without crossover cable.

SIGNAMAX LLC • www.signamax.eu
Technical Specifications
Standards IEEE 802.3 10BaseT
IEEE 802.3u 100BaseTX
IEEE 802.3x Flow control
Features Number of Ports: 16
MAC Address: 4K
Buffer Memory: 768K bits
Transmission Method:
Store and Forward
Filtering/Forwarding
Rates
100Mbps port –
148,800pps
10Mbps – 14,880pps
Transmission Media 10BaseT Cat. 3, 4, 5
UTP/STP
100BaseTX Cat. 5
UTP/STP
LED Indicators Per Port: LINK/ACT
Per Unit: Power
Power Supply DC 7.5V/0.8A
Power Consumption 10 Watts (Max)
Dimensions 130 x 80 x 35 mm (L x W x
H)
Weight 0.45 kg
Operating
Temperature 0 to 55℃
Storage
Temperature -20 to 90℃
Humidity 10 to 90% RH
(non-condensing)
Certifications FCC Class B, CE