SignaMax SC30010 Instruction Manual

C-300 Series Gigabit Managed Switch
CLI Reference Guide
SOFTWARE RELEASE
V1.1.10.171
www.signamax.com

CLI Reference Guide
SC30010
C-300 48 Port Gigabit Managed Switch
E122017-KS-R01

– 3 –
How to Use This Guide
This guide includes detailed information on the switch software, including how
to operate and use the management functions of the switch. To deploy this
switch effectively and ensure trouble-free operation, you should first read the
relevant sections in this guide so that you are familiar with all of its software
features.
Who Should Read
This Guide?
This guide is for network administrators who are responsible for operating and
maintaining network equipment. The guide assumes a basic working
knowledge of LANs (Local Area Networks), the Internet Protocol (IP), and
Simple Network Management Protocol (SNMP).
How This Guide is
Organized
This guide describes the switch’s command line interface (CLI). For more
detailed information on the switch’s key features or information about the web
browser management interface refer to the Web Management Guide.
The guide includes these sections:
◆Section I “Getting Started” — Includes information on initial configuration.
◆Section II “Command Line Interface” — Includes all management options
available through the CLI.
◆Section III “Appendices” — Includes information on troubleshooting switch
management access.
Related
Documentation
This guide focuses on switch software configuration through the CLI.
For information on how to manage the switch through the Web management
interface, see the following guide:
Web Management Guide
For information on how to install the switch, see the following guide:
Installation Guide
For all safety information and regulatory statements, see the following
documents:

How to Use This Guide
– 4 –
Quick Start Guide
Safety and Regulatory Information
Conventions The following conventions are used throughout this guide to show information:
Note: Emphasizes important information or calls your attention to related
features or instructions.
Caution: Alerts you to a potential hazard that could cause loss of data, or
damage the system or equipment.
Revision History This section summarizes the changes in each revision of this guide.
Revision Date ChangeDescription
v1.1.10.171 12/2017 Initialrelease

– 5 –
Contents
How to Use This Guide 3
Contents 5
Tables 29
SECTION I GETTING STARTED 34
1 Initial Switch Configuration 35
Connecting to the Switch 35
Configuration Options 35
Connecting to the Console Port 36
Logging Onto the Command Line Interface 37
Setting Passwords 37
Remote Connections 38
Configuring the Switch for Remote Management 39
Using the Network Interface 39
Setting an IP Address 39
Enabling SNMP Management Access 45
Managing System Files 47
Upgrading the Operation Code 48
Saving or Restoring Configuration Settings 48
Automatic Installation of Operation Code and Configuration Settings 50
Downloading Operation Code from a File Server 50
Specifying a DHCP Client Identifier 53
Downloading Configuration Files / Other Parameters from a DHCP Server 54
Setting the System Clock 56
Setting the Time Manually 57
Configuring SNTP 57
Configuring NTP 58

Contents
– 6 –
SECTION II COMMAND LINE INTERFACE 59
2 Using the Command Line Interface 61
Accessing the CLI 61
Console Connection 61
Telnet Connection 62
Entering Commands 63
Keywords and Arguments 63
Minimum Abbreviation 63
Command Completion 64
Getting Help on Commands 64
Partial Keyword Lookup 66
Negating the Effect of Commands 66
Using Command History 66
Understanding Command Modes 66
Exec Commands 67
Configuration Commands 68
Command Line Processing 69
Showing Status Information 70
CLI Command Groups 71
3 General Commands 73
prompt 73
reload (Global Configuration) 74
enable 75
quit 76
show history 76
configure 77
disable 78
reload (Privileged Exec) 78
show reload 79
end 79
exit 79
4 System Management Commands 81

Contents
– 7 –
Device Designation 81
hostname 82
System Status 82
show access-list tcam-utilization 83
show license file 84
show memory 85
show process cpu 85
show process cpu guard 86
show process cpu task 87
show running-config 88
show startup-config 90
show system 90
show tech-support 92
show users 93
show version 93
show watchdog 94
watchdog software 94
Fan Control 95
fan-speed force-full 95
Frame Size 95
jumbo frame 95
File Management 96
General Commands 97
boot system 97
copy 98
delete 102
dir 103
whichboot 104
Automatic Code Upgrade Commands 105
upgrade opcode auto 105
upgrade opcode path 106
upgrade opcode reload 107
show upgrade 108
TFTP Configuration Commands 108
ip tftp retry 108

Contents
– 8 –
ip tftp timeout 109
show ip tftp 109
Line 110
line 111
databits 111
exec-timeout 112
login 113
parity 114
password 114
password-thresh 115
silent-time 116
speed 117
stopbits 117
timeout login response 118
disconnect 118
terminal 119
show line 120
Event Logging 121
logging command 121
logging facility 122
logging history 122
logging host 123
logging on 124
logging trap 125
clear log 125
show log 126
show logging 127
SMTP Alerts 128
logging sendmail 129
logging sendmail destination-email 129
logging sendmail host 129
logging sendmail level 130
logging sendmail source-email 131
show logging sendmail 131
Time 132

Contents
– 9 –
SNTP Commands 133
sntp client 133
sntp poll 134
sntp server 134
show sntp 135
NTP Commands 135
ntp authenticate 135
ntp authentication-key 136
ntp client 137
ntp server 138
show ntp 139
Manual Configuration Commands 139
clock summer-time (date) 139
clock summer-time (predefined) 141
clock summer-time (recurring) 142
clock timezone 143
calendar set 144
show calendar 145
Time Range 145
time-range 146
absolute 146
periodic 147
show time-range 148
Switch Clustering 149
cluster 150
cluster commander 150
cluster ip-pool 151
cluster member 152
rcommand 152
show cluster 153
show cluster members 153
show cluster candidates 154
5 SNMP Commands 155

Contents
– 10 –
General SNMP Commands 157
snmp-server 157
snmp-server community 157
snmp-server contact 158
snmp-server location 158
show snmp 159
SNMP Target Host Commands 160
snmp-server enable traps 160
snmp-server host 161
snmp-server enable port-traps link-up-down 163
snmp-server enable port-traps mac-notification 164
show snmp-server enable port-traps 164
SNMPv3 Commands 165
snmp-server engine-id 165
snmp-server group 166
snmp-server user 167
snmp-server view 169
show snmp engine-id 170
show snmp group 170
show snmp user 171
show snmp view 172
Notification Log Commands 173
nlm 173
snmp-server notify-filter 174
show nlm oper-status 175
show snmp notify-filter 175
Additional Trap Commands 176
memory 176
process cpu 177
process cpu guard 177
6 Remote Monitoring Commands 179
rmon alarm 180
rmon event 181
rmon collection history 182