SignaMax 065-7908A User manual

User‘s Guide
8 Port Nway Gigabit Switch
Model :065-7908A

SIGNAMAX LLC • www.signamax.eu
FCC Warning
This device has been tested and found to comply with limits for a
Class B digital device, pursuant to Part 2 and 15 of FCC Rules.
These limits are designed to provide reasonable protection
against harmful interference when the equipment is operated in a
commercial environment. This equipment generates and
radiates radio frequency energy and, if not installed and used in
accordance with the user’s manual, it may cause interference in
which case users will be required to correct interference at their
own expenses.
CE Warning
This is a Class B product. In a domestic environment, this
product may cause radio interference in which case the user may
be required to take adequate measures.

SIGNAMAX LLC • www.signamax.eu
Introduction
065-7908A switch provides 8 10/100/1000M ports. 065-7908A
switch was designed for easy installation and high performance
in an environment where traffic is on the network and the number
of users increases continuously.
The compact rigid desktop size was specifically designed for
small to medium workgroups. 065-7908A switch can be installed
where space is limited; moreover, it provides smooth network
migration and easy upgrade to network capacity.

SIGNAMAX LLC • www.signamax.eu
Package Contents
Before you start to install this switch, please verify your package
that contains the following items:
One 065-7908A Gigabit Ethernet Switch
One Power Cord
One CD with User’s Manual
Note: If any of these items is found missing or damaged, please
contact your local supplier for replacement.

SIGNAMAX LLC • www.signamax.eu
Key Features
8 Port 10/100/1000M Nway (Auto-negotiation) Switch
9” Desktop size with metal case
Can be installed in a 10” / 19” cabinet by rack-mount kits
Auto-learn of networking configurations
Auto-detect full/half-duplex modes for any port
Dedicated full-duplex 200Mbps bandwidth
Store-and-Forward switching methods
IEEE 802.3x flow control for full-duplex and back-pressure
flow control for half-duplex
Non-blocking & Non-head-of-line blocking full wire speed
forwarding
Auto-MDI/MDI-X function for any port
Smart plug & play
Front Panel (LEDs)
LED Indicators of 8 Port 10/100/1000M Switch
LED Status Description
On Power is on.Power
Off Power is off.
On Port is for connection.
Off No connection.
LINK/ACT
Flashing Data is transmitting or
receiving
On Port is on 1000M status1000M
Off Port is on 10/100M status.

SIGNAMAX LLC • www.signamax.eu
Connections
Switch/Hub to 065-7908A Gigabit Ethernet Switch
065-7908A switch provides automatic crossover detection
functionality for any port. It is simple and friendly to up-link to
another switch without crossover cable.
PC/Other devices to 065-7908A Gigabit Ethernet Switch
Via a twisted pair cable straight through, 065-7908A switch can
be connected to PCs, servers and other network devices.

SIGNAMAX LLC • www.signamax.eu
Rear Panel (Power)
AC input
AC input (100~240V/AC, 50~60Hz) UL Safety
Technical Specifications
Standards
IEEE 802.3 10BaseT
IEEE 802.3u 100BaseTX
IEEE 802.3ab 1000BaseT
IEEE 802.3x Flow control
Features
Number of Ports: 8
MAC Address: 8K
Buffer Memory: 144 KB
Jumbo Frames: 9.6 KB
Method: Store and Forward
Filtering/
Forwarding Rates
1000Mbps port –
1,488,000pps
100Mbps port – 148,800pps
10Mbps – 14,880pps
Transmission Media
10BaseT Cat. 3, 4, 5
UTP/STP
100BaseTX Cat. 5 UTP/STP
1000BaseT Cat. 5E UTP/STP
LED Indicators Per Port: LINK/ACT, 1000M
Per Unit: Power
Power Requirement 100~240V/AC, 50~60Hz
Power Consumption 15 Watts (Max)
Dimensions 228 × 123 × 44 mm

SIGNAMAX LLC • www.signamax.eu
(L x W x H)
Weight 0.92 kg
Operating
Temperature 0 to 55℃
Storage
Temperature -20 to 90℃
Humidity 10 to 90% RH
(non-condensing)
Certifications FCC Class B, CE