SignaMax 065-7401 User manual

Signamax Connectivity Systems 065-740x Series
www.signamax-us.com www.signamax-eu.com
SignamaxConnectivity Systems
Hardened Compact Switch
User's Guide
Model: 065-7401
065-7402
065-7405
065-74051
065-74052

Signamax Connectivity Systems 065-740x Series
www .signamax-us.com www.signamax-eu.com
1
Preface
A member of the growing family of rugged switches, this
switch addresses a need for a smaller switch. This switch
provides an affordable solution for rugged and outdoor
environment, transportation road-side cabinet, industrial
floor shop, multitenant dwellings or Fiber To The Home
(FTTH) applications. Capable of operating at temperature
extremes of -10°C to +60°C, this is the switch of choice for
harsh environments constrained by space.
Plug-and-Play Solution:
The switch is a plug-and-play Fast Ethernet Switch in
compact size. It doesn't have any complicated software to
set up.
This manual describes how to install and use the hardened
compact Ethernet Switch. This switch integrates full wire
speed switching technology. This switch brings the answer
to complicated hardened networking environments.
To get the most out of this manual, you should have an
understanding of Ethernet networking concepts.
In this manual, you will find:
•Features on the switch
•Illustrative LED functions
•Installation instructions
•Specifications

Signamax Connectivity Systems 065-740x Series
www .signamax-us.com www.signamax-eu.com
2
Table of Contents
P REFACE 1
T ABLE OF C ONTENTS 2
P RODUCT O VERVIEW 3
H ARDENED C OMPACT S WITCH 3
P ACKAGE C ONTENTS 3
P RODUCT H IGHLIGHTS 4
Basic Features 4
F RONT P ANEL D ISPLAY 5
P HYSICAL P ORTS 6
I NSTALLATION 7
S ELECTING A S ITE FOR THE S WITCH 7
DIN R AIL M OUNTING 7
C ONNECTING TO P OWER 7
DC Terminal Block Power Inputs 7
C ONNECTING TO Y OUR N ETWORK 8
Cable Type & Length 8
Cabling 9
S PECIFICATIONS 10
A PPENDIX A – C ONNECTOR P INOUTS 12

Signamax Connectivity Systems 065-740x Series
www .signamax-us.com www.signamax-eu.com
3
Product Overview
Hardened Compact Switch
Package Contents
When you unpack the product package, you shall find the
items listed below. Please inspect the contents, and report
any apparent damage or missing items immediately to your
authorized reseller.
This Switch
User’s Manual

Signamax Connectivity Systems 065-740x Series
www .signamax-us.com www.signamax-eu.com
4
Product Highlights
Basic Features
•5-port 10/100Base-TX or 4-port 10/100Base-TX plus
1-port 100Base-FX.
•Available in media converter format with 1-port
10/100Base-TX and 1-port 100Base-FX.
•Support IEEE802.3/802.3u/802.3X.
•Auto-negotiation: 10/100Mbps, Full/half-duplex; Auto
MDI/MDIX.
•Support 2K MAC addresses.
•Store-and-forward mechanism.
•Full wire-speed forwarding rate and non-blocking
mechanism.
•Broadcast storm filtering.
•Operating voltage and Max. current consumption:
12VDC @ 0.71A, 24VDC @ 0.37A, 48VDC @ 0.22A.
•Power consumption: 10.56W Max.
•Power Supply: DC Terminal Block power input,
10-48VDC with polarity protection.
•Plastic compact DIN-Rail Industrial case design.
•DIN-Rail mounting ability.

Signamax Connectivity Systems 065-740x Series
www .signamax-us.com www.signamax-eu.com
5
Front Panel Display
LED State Indication
10/100TX or 100FX
Steady A valid network connection established.
LNK stands for LINK.
LNK/ACT
(Green) Flashing
Transmitting or receiving data.
ACT stands for ACTIVITY.
Steady Light solid yellow for a port transferring
at 100Mbps.
100
(Yellow) Off The port is transferring at 10Mbps If this
LED is dark.

Signamax Connectivity Systems 065-740x Series
www .signamax-us.com www.signamax-eu.com
6
Physical Ports
This switch provides:
•Five 10/100BaseTX ports
•Four 10/100BaseTX ports + one 100BaseFX port
•One 10/100BaseTX port + one 100BaseFX port
CONNECTIVITY
•RJ-45 connectors
•SC or ST connecto on 100BaseFX fiber port.

Signamax Connectivity Systems 065-740x Series
www .signamax-us.com www.signamax-eu.com
7
Installation
This chapter gives step-by-step instructions about how to
install the switch:
Selecting a Site for the Switch
As with any electric device, you should place the switch
where it will not be subjected to extreme temperatures,
humidity, or electromagnetic interference. Specifically, the
site you select should meet the following requirements:
- The ambient temperature should be between -10 to 60
degrees Celsius.
- The relative humidity should be less than 90 percent,
non-condensing.
- Surrounding electrical devices should not exceed the
electromagnetic field (RFC) standards.
-Make sure that the switch receives adequate
ventilation. Do not block the ventilation holes on each
side of the switch
-
The Terminal Block
PWR Power Input
GND Power Ground
Earth Ground

Signamax Connectivity Systems 065-740x Series
www.signamax-us.com www.signamax-eu.com
8
Connecting to Your Network
Cable Type & Length
It is necessary to follow the cable specifications below
when connecting the switch to your network. Use
appropriate cables that meet your speed and cabling
requirements.
Cable Specifications
Speed Connector Port Speed
Half/Full
Duplex
Cable
Max.
Distance
10BaseT RJ-45 10/20 Mbps 2-pair
UTP/STP Cat.
3, 4, 5
100 m
100BaseTX RJ-45 100/200 Mbps 2-pair
UTP/STP Cat.
5
100 m
100BaseFX SC, ST 100/200 Mbps MMF (50 or
62.5µm)
2 km
100BaseFX SC, ST 100/200 Mbps SMF (9 or
10µm)
15, 40, or 75
km

Signamax Connectivity Systems 065-740x Series
www.signamax-us.com www.signamax-eu.com
9
Cabling
Step 1: First, ensure the power of the switch and end devices is turned
off.
<Note> Always ensure that the power is off before any installation.
Step 2: Prepare cable with corresponding connectors for each type of
port in use.
<Note> To connect two regular RJ-45 ports between switches or hubs, you
need a cross-over cable.
Step 3: Consult the previous section for cabling requirements based
on connectors and speed.
Step 4: Connect one end of the cable to the switch and the other end
to a desired device.
Step 5: Once the connections between two end devices are made
successfully, turn on the power and the switch is operational.