signia StreamLine Mic User manual

StreamLine Mic
Quick start guide
signiausa.com
Use as a remote control
StreamLineMic can also be used as a remote control for your
hearing instruments. You can:
• Adjust the volume by pressing or
• Mute the hearing instrument microphones by holding down
the button for 3seconds to mute OR unmute the hearing
instrument*
• Change the next hearing program by holding down the
button for approximately 3seconds*
*This function is not available while StreamLineMic is used as a remote
microphone.
Maximum distances:
• Hearing instruments— StreamLineMic: 6.5ft
StreamLine Mic controls
➊Microphones
➋Power indicator
➌Status indicator
➍ Multi-function button
➎ Volume buttons and
➏ USB port for charging
➏
➎
➍
➌➋
➊
➏
➎
➍
➌
➋
➊
➏
➎
➍
➌➋
➊
StreamLine Mic status and power
indicator overview
Status indicator
Description
Flashing yellow
Searching for hearing instruments.
Yellow
Idle mode: Connected to hearing instruments.
Not connected to a smartphone or other device.
Flashing blue
StreamLineMic is visible to a smartphone for
pairing purpose.
Blue
Phone mode: Connected to a smartphone.
Flashing green
Incoming call.
Green
In a call.
Orange
Streaming music.
Magenta
Remote microphone mode.
Flashing magenta
Reconnecting remote microphone.
Power indicator
Description
Red
Battery is low.
Flashing green
Charging while turned on.
Green fades o
Charging is completed and StreamLineMic is turned on.
Green
Turned on, not charging.
Flashing orange
Charging while turned o.
Orange
Charging is completed and StreamLineMic is turned o.
Manufactured by
Sivantos, Inc.
10 Constitution Avenue
Piscataway, NJ 08854
Phone: [phone]
Fax: [phone]
Information in this brochure is subject to change without notice. Copyright © 2018
Sivantos, Inc. All rights reserved. Sivantos, Inc. is a Trademark Licensee of Siemens AG.
The Bluetooth® word mark and logos are owned by the Bluetooth SIG, Inc. and
any use of such marks by Sivantos is under license. Other trademarks and trade
names are those of their respective owners.
Part #10240258 2/18 1.0 22B711 8K SI/18302-18
signiausa.com
5 6 7

Pairing StreamLine Mic with hearing aids
1. Ensure that StreamLineMic is o: Hold down the button
until the power indicator is o. This takes approximately
6seconds.
2. Turn the hearing instruments o and on again:
Open and close the battery compartments. If your hearing
instruments do not have a battery compartment, turn them
o and on as described in the hearing instrument’s user
guide.
3. The hearing instruments are now ready for pairing. You have
3minutes to complete the pairing.
4. Turn on StreamLineMic: Hold down the button until
the power indicator is green . This takes approximately
3seconds.
5. The status indicator flashes yellow .
6. Place both hearing instruments close
to StreamLineMic (maximum distance
8inches).
7. The pairing process starts automatically
Pairing is finished when the status indicator
is yellow .
Pairing StreamLine Mic with smart phones
1. Hold down the and the button simultaneously
until the status indicator flashes blue . This takes
approximately 6seconds.
StreamLineMic is now ready for pairing. You have 3minutes
to complete the pairing.
2. Set your smartphone or music player to “search for other
Bluetooth®devices”. Refer to the device’s manual.
3. On your smartphone or music player, select
“StreamLineMic” from the list of detected devices.
4. If requested, enter the PIN “0000”.
Pairing is finished when the status indicator is blue .
Making phone calls
StreamLineMic should be worn as illustrated in the pictures
for best possible performance. It is important that the
microphone of StreamLineMic is pointing towards your
mouth, and that StreamLineMic is not covered by clothes etc.
Maximum distance:
• Smartphone— StreamLineMic: 33ft
• Hearing instruments— StreamLineMic: 6.5ft
Receiving a call
You will hear a ringtone in your hearing instruments.
The status indicator flashes green .
1. To accept/end the call, press or accept/end the call
with your smartphone.
While you are in a call, the status indicator is
green .
2. To reject a call, hold down the button for
approximately 3seconds.
Making a call
When you call someone with your connected smartphone,
the call is automatically streamed to your hearing instruments.
While you are in a call, the status indicator is green .
This function is not available while StreamLineMic is used as a
remote microphone.
Further information
Voice dialing: When connected to a smartphone, double-
press to activate voice dialing (if supported by the
smartphone).
Listening to music
If StreamLineMic is connected to a music player through
Bluetooth, the music will automatically be played in your
hearing instruments. You do not need to operate anything on
StreamLineMic.
While music is streamed, the status indicator is orange .
Maximum distances:
• Music player— StreamLineMic: 33ft
• Hearing instruments— StreamLineMic: 6.5ft
Starting/stopping music
• Use your smartphone or music player to start/stop
the music.
To stop the music, you can also shortly press
on StreamLineMic.
Use as a remote microphone
The remote microphone function does not start automatically.
You have to toggle to the remote microphone mode via the
button.
It is important that the microphone is pointing towards the
speaker’s mouth, and that StreamLineMic is not covered by
clothes etc.
Maximum distance:
• Hearing instruments— StreamLineMic: 66ft
Turning remote microphone on
• Press for approximately 3seconds.
The status indicator is magenta . A confirmation
tone is played in your hearing instruments.
The remote microphones are turned on. Speech from the
person wearing StreamLineMic is streamed directly to
your hearing instruments.
Turning remote microphone o
• Hold down the button for approximately 3seconds.
The status indicator is blue (connected to
a smartphone) or yellow (not connected to a
smartphone).
1 2 3 4