SIGNIFY EA2265 User manual

Model Number: EA2265
INSTRUCTION MANUAL
SOLAR PORTABLE CHARGER

AFTER SALES SUPPORT
1300 777 137
[email protected]
MODEL: EA2265 PRODUCT CODE: 711503 03/2023
02
WELCOME
Congratulations on choosing to buy a Signify product.
All products brought to you by Signify are manufactured to the highest standards of
performance and safety, and, as part of our philosophy of customer service and satisfaction,
are backed by our comprehensive 1 Year Warranty and customer technical support line.
This comprehensive instruction manual will provide you with a detailed guide on how to
operate your product and will also assist you in troubleshooting any problems that you may
encounter.
If you have any queries regarding the use of this product, please feel free to phone our
technical support line for some friendly advice. If you are experiencing difculties or believe
that the product may have a technical fault, we will assist you in rectifying the issue. We can
generally solve most problems simply and quickly over the phone, so please always phone
us rst!
We are sure that you will enjoy using this product and you can expect to gain years of service
from this product when it is used and maintained in the correct manner.

AFTER SALES SUPPORT
1300 777 137
[email protected]
MODEL: EA2265 PRODUCT CODE: 711503 03/2023 03
CONTENTS
Welcome 02
Warranty Details 04
General Information and Safety Instructions 05
Product Overview 08
Solar Portable Charger 08
Junction Box 09
Carabiners 09
Getting Started 10
Instructions 12
Attaching the Solar Portable Charger 13
Setting up Solar Portable Charger when not attaching it to an Object 15
Charging Devices using your Solar Portable Charger 16
Repair and Refurbished Goods or Parts Notice 18
Frequently Asked Questions 19
Other Useful Information 20
Cleaning and Maintenance 20
Storage 20
Responsible Disposal 21
Specication Table 21

AFTER SALES SUPPORT
1300 777 137
04
[email protected]
MODEL: EA2265 PRODUCT CODE: 711503 03/2023
Solar Portable Charger
Warranty Details
REGISTER YOUR PURCHASE AT www.aldi.com.au/en/about-aldi/product-registration/
TO KEEP UP-TO-DATE WITH IMPORTANT PRODUCT INFORMATION
The product is guaranteed to be free from defects in workmanship and parts for a period
of 12 months from the date of purchase. Defects that occur within this warranty period,
under normal use and care, will be repaired, replaced or refunded at our discretion. The
benets conferred by this warranty are in addition to all rights and remedies in respect of
the product that the consumer has under the Competition and Consumer Act 2010 and
similar state and territory laws.
Our goods come with guarantees that cannot be excluded under the Australian
Consumer Law. You are entitled to a replacement or refund for a major failure and for
compensation for any other reasonably foreseeable loss or damage. You are also entitled
to have the goods repaired or replaced if the goods fail to be of acceptable quality and the
failure does not amount to a major failure.

AFTER SALES SUPPORT
1300 777 137
[email protected]
MODEL: EA2265 PRODUCT CODE: 711503 03/2023 05
RETAIN FOR FUTURE USE
Read this manual thoroughly before rst use, even if you are familiar with this type of
product. The safety precautions enclosed herein reduce the risk of re; electric shock and
injury when correctly adhere to. Please keep this instruction manual in a safe place along
with your purchase receipt, warranty certicate and carton for future reference. If applicable,
pass these instructions and packaging on to the next owner of the product. Always follow
basic safety precautions and accident prevention measures when using this product.
1. Read all instructions before using the Solar Portable Charger.
2. The Solar Portable Charger is not intended for use by persons (including children) with
reduced physical, sensory or mental capabilities, or lack of experience and knowledge,
unless they have been given supervision or instruction concerning use of the product
by a person responsible for their safety. Children should be supervised to ensure they
do not play with the Solar Portable Charger.
3. Do not use the Solar Portable Charger for anything other than its intended use.
4. Do not immerse the Solar Portable Charger in water or any other liquids.
5. Do not use the Solar Portable Charger if it has been dropped or damaged in any way.
Contact our After Sales Support line on 1300 137 777 for further advice.
6. This product is not a toy. Keep the Solar Portable Charger out of reach of children.
7. The manufacturer and retailer are not responsible for any eventual damages caused by
improper or faulty use.
8. Do not pull or carry the Solar Portable Charger by the USB charging cable (not supplied).
9. Never force the USB charging cable (not supplied) into the Solar Portable Charger’s
USB ports.
10. Always unplug the USB charging cable (not supplied) from the Solar Portable Charger
when it is not charging your device.
11. The USB charging cable (not supplied) must be removed from the Solar Portable
Charger before cleaning, servicing, or maintenance.
12. Do not place the Solar Portable Charger near a hot burner (gas or electric), other heat
emitting sources or open ames.
13. The Solar Portable Charger is intended for private use and not suitable for commercial
purposes.
14. Never touch the Solar Portable Charger with wet or damp hands.
15. Do not place the Solar Portable Charger such that there is a risk of it falling into a body
of water.
16. The Solar Portable Charger contains no user-serviceable parts inside. Do not try to
dismantle, modify, or repair the device or its accessories yourself. Contact the after
sales support for advice on 1300 777 137.
GENERAL INFORMATION AND SAFETY INSTRUCTIONS

AFTER SALES SUPPORT
1300 777 137
[email protected]
MODEL: EA2265 PRODUCT CODE: 711503 03/2023
06
17. Never attempt to clean the Solar Portable Charger by immersing it in water and do not
use a steam cleaner to clean it. Otherwise, you could damage the Solar Portable Charger.
18. When the Solar Portable Charger is not in use or being cleaned, it is recommended to
place it in the original packaging and store in a clean dry location.
19. Never leave the Solar Portable Charger unattended when in use. When charging devices
using the Solar Portable Charger, you should always maintain constant observation to
monitor the charging process and react to potential problems that may occur.
20. Do not allow the Solar Portable Charger to come into contact with sharp objects as this
will cause scratches and damage to the unit. This will void the warranty.
IMPORTANT: The Solar Portable Charger can not store electricity, it uses energy from
the sun to charge devices (USB rechargeable) in real time.
IMPORTANT: Conditions like the quality and consistency of sunlight will affect the
charging process since the Solar Portable Charger relies purely on solar power.
NOTE: For optimum charging results, adjust the angle of the solar panels so they face
the sun directly.
NOTE: The Solar Portable Charger will only function where there is direct sunlight
available. The Solar Portable Charger will not work in conditions such as when it is
overcast, night-time or if its panels are blocked from direct sunlight e.g. positioned in a
shady area.
NOTE: The solar panels of the Solar Portable Charger may get hot from time to time,
while being exposed to the sun for long periods of time. This is normal and not a
product fault.
WARNING: Repairs to the Solar Portable Charger should only be performed by a
qualied technician. Improper repairs may place the user at serious risk and will void
the warranty.
WARNING: The Solar Portable Charger can only charge compatible devices with
rechargeable batteries. Attempting to charge non-compatible devices or devices with
non-rechargeable batteries may cause product failure, damage the Solar Portable
Charger or cause harm to the user.
GENERAL INFORMATION AND SAFETY INSTRUCTIONS (CONT.)

AFTER SALES SUPPORT
1300 777 137
[email protected]
MODEL: EA2265 PRODUCT CODE: 711503 03/2023 07
GENERAL INFORMATION AND SAFETY INSTRUCTIONS (CONT.)
WARNING: The devices being charged using the Solar Portable Charger may not be
suitable for long term sunlight exposure. Excessive heat may cause damage to them.
Always refer to the guidelines provided by the manufacturer of the device being charged
to avoid any hazard, or possible product failure.
Read this instruction manual
carefully before using the Solar
Portable Charger and keep it in a
safe place for future reference.

AFTER SALES SUPPORT
1300 777 137
[email protected]
MODEL: EA2265 PRODUCT CODE: 711503 03/2023
08
1. Solar Panels
2. Eyelets (for attaching the carabiners)
3. Storage Pouch
4. Junction Box
5. Hook and Loop Tape (Storage Pouch)
6. Hook and Loop Tape (Solar Portable
Charger)
7. 4 x Carabiners
PRODUCT OVERVIEW
7
Included (not pictured):
Instruction Manual, Getting Started Guide, Warranty Certicate.
1 22 43
5 6
Solar Portable Charger

AFTER SALES SUPPORT
1300 777 137
[email protected]
MODEL: EA2265 PRODUCT CODE: 711503 03/2023 09
1. Current Display
2. USB Port 1
3. USB Port 2
4. USB Dust Cover 1
5. USB Dust Cover 2
1. Nose
2. Gate Opening
3. Gate
4. Hinge
5. Spine
PRODUCT OVERVIEW (CONT.)
Junction Box
Carabiners
1
5
2
3
4
1
45
2 3
WARNING: Do not attempt to remove the
junction box from the Solar Portable Charger.

AFTER SALES SUPPORT
1300 777 137
[email protected]
MODEL: EA2265 PRODUCT CODE: 711503 03/2023
10
Before First Use
Prior to using your Solar Portable Charger, please read all safety and operating instructions
thoroughly. Please ensure you follow the steps below before using this product.
1. Unpack the product but keep all packaging materials until you have made sure your
new Solar Portable Charger is undamaged and in good working order.
2. Plastic wrapping can be a suffocation hazard for babies and children, so ensure all
packaging materials are kept out of their reach.
3. We recommend you keep the original packaging for storing your Solar Portable
Charger when not in use.
Opening the Solar Portable Charger
Your Solar Portable Charger comes folded and held together by a
hook and loop tape (Fig. 1).
Place the Solar Portable Charger on a at, dry surface. Grasp
one of the corners of the visible side edge of the Solar Portable
Charger (Fig. 2), and gently start pulling towards you (Fig. 3) until
the hook and loop tape is completely separated (Fig. 4). Unfold the
Solar Portable Charger until all four solar panels and the storage
pouch are completely exposed and facing upwards (Fig. 5).
Closing the Solar Portable Charger
Place the Solar Portable Charger on a at, dry surface so that the solar panels and the
storage pouch are facing upwards (Fig. 5). Holding the edge of the Solar Portable Charger
which is furthest away from the storage pouch (Fig. 6), fold the Solar Portable Charger one
solar panel at a time (Fig. 7), towards the storage pouch, until the Solar Portable Charger is
completely folded and the hook and loop tape is aligned (Fig. 8). Now gently tap on the fabric
above the hook and loop tape (Fig. 9) until the Solar Portable Charger is securely closed.
GETTING STARTED
Fig. 1
Fig. 2
Fig. 6
Fig. 3
Fig. 7
Fig. 4
Fig. 8
Fig. 5
Fig. 9

AFTER SALES SUPPORT
1300 777 137
[email protected]
MODEL: EA2265 PRODUCT CODE: 711503 03/2023 11
GETTING STARTED (CONT.)
NOTE: Before closing the Solar Portable Charger, always check that all USB charging
cables (not supplied) have been disconnected (removed) from the USB ports, and all
the carabiners have been unhooked from the eyelets and placed in the storage pouch.
WARNING: Do not store any sharp objects inside the storage pouch as they can pierce the
storage pouch and cause damage to the Solar Portable Charger. This will void the warranty.
WARNING: The solar panels and junction box must be checked regularly for damage.
Do not use the product if these parts are damaged. In case of damage, contact our
After Sales Support line for advice.
WARNING: The Solar Portable Charger is weather resistant and will fend off low
pressure water/rain from any direction. However, the Solar Portable Charger is not
built for use in high pressure water/heavy rain, and it cannot be totally submerged
underwater. If exposed to heavy rain, make sure to dry completely before using it
again.

AFTER SALES SUPPORT
1300 777 137
[email protected]
MODEL: EA2265 PRODUCT CODE: 711503 03/2023
12
INSTRUCTIONS
The Solar Portable Charger is a lightweight, compact, and rugged charging device made
of high power conversion monocrystalline solar cells. Suitable for all outdoor activities such
as camping and hiking, the Solar Portable Charger is versatile, convenient and can be
folded up so that it ts easily into your backpack.
Use the supplied metal carabiners to attach the Solar Portable Charger to a backpack,
tent, tree, camping chair or the side of your awning. Alternatively, if you do not need
additional support and have sufcient open space, simply lay the Solar Portable Charger
on the ground, or drape it over the bonnet or windscreen of your vehicle.
NOTE: The Solar Portable Charger does not hold a charge; it produces power when it
is exposed to sunlight. You can plug your smartphone directly into the Solar Portable
Charger using a USB charging cable (not supplied) or use it to recharge a portable
power storage device (such as a power bank) for later use. The Solar Portable Charger
is best used for recharging devices such as smartphones, power banks, DSLRs,
headlamps, tness trackers, lighthouse lanterns, small USB devices and small portable
power stations.
NOTE: The Solar Portable Charger will only charge USB rechargeable devices that need
a 5V DC input voltage (no extra voltage). The Solar Portable Charger does not support
charging laptops and large portable power stations.
WARNING: The Solar Portable Charger can only charge compatible devices with
rechargeable batteries. Attempting to charge non-compatible devices or devices with
non-rechargeable batteries may cause product failure, damage the Solar Portable
Charger or harm to the user.

AFTER SALES SUPPORT
1300 777 137
[email protected]
MODEL: EA2265 PRODUCT CODE: 711503 03/2023 13
INSTRUCTIONS (CONT.)
Attaching the Solar Portable Charger
There are 4 x metal carabiners included for
your convenience (see page 8). The metal
carabiners can be used to attach the Solar
Portable Charger to a backpack, tent, tree,
annex or any other suitable object.
1. Please follow the instructions on page 10
to open (unfold) the Solar Portable Charger.
2. The Solar Portable Charger has four eyelets (see page 8).
The Solar Portable Charger can be attached to an object
using either two, or all four eyelets. You will need to use one
carabiner for each of the eyelets (Fig. 10).
NOTE: We recommend that you use all four eyelets, where
possible, to attach the Solar Portable Charger to an object.
This will provide overall better balance and more even weight
distribution. If this is not an option, then use at least two eyelets
(preferably the eyelets closest to the storage pouch) to attach
the Solar Portable Charger to the object.
NOTE: To securely attach the Solar Portable Charger to an object,
the object you are attaching to must have a strap, eyelet or other
suitable attachment which you can attach the carabiner to.
3. Hold the carabiner in one hand and gently push the gate
inwards (towards the spine of the carabiner), so that the
carabiner gate is open (Fig. 11).
4. Pass the nose of the carabiner through the eyelet of the Solar
Portable Charger and the strap or eyelet on the object you are
attaching the Solar Portable Charger to (Fig. 12).
5. Release the gate of the carabiner so that the gate returns to its
original position and the carabiner gate is now closed (Fig. 13).
6. Repeat steps 3 to 5 to attach the vacant eyelets on the Solar
Portable Charger to remaining straps or eyelets on the object.
The Solar Portable Charger should now be securely attached
to the object (Fig. 14).
Fig. 10
Fig. 11
Fig. 12
Fig. 13
Fig. 14

AFTER SALES SUPPORT
1300 777 137
[email protected]
MODEL: EA2265 PRODUCT CODE: 711503 03/2023
14
NOTE: When attaching the Solar Portable Charger to an object, we
recommend that the short edge closest to the storage pouch is at the top
(facing upwards) (Fig. 15).
IMPORTANT: The storage pouch should always be closed by its own hook
and loop tape. This will keep the loose contents inside the storage pouch
secure and will prevent the contents from possibly falling out. However,
we do recommend that while attaching the Solar Portable Charger to an
object, the hook and loop edge of the storage pouch is also positioned at
the top (facing upwards) (Fig. 16).
NOTE: To securely attach the Solar Portable Charger to an object
such as a backpack, tent etc. ensure that the eyelets on the Solar
Portable Charger and the eyelets or strap on the object are not
damaged.
NOTE: The object you are attaching the Solar Portable Charger
to should weigh at least 2kgs, which is the minimum weight
required to carry the Solar Portable Charger.
INSTRUCTIONS (CONT.)
Fig. 15
Fig. 16

AFTER SALES SUPPORT
1300 777 137
[email protected]
MODEL: EA2265 PRODUCT CODE: 711503 03/2023 15
INSTRUCTIONS (CONT.)
Setting up Solar Portable Charger when not attaching it to an Object
The Solar Portable Charger will perform at its peak with the solar panels angled directly
towards the sun. Peak power refers to the total actual solar cell power before transmission
losses from laminates and atmospheric conditions. As the Solar Portable Charger is
portable and lightweight, it is possible to adjust the angle and position of your Solar
Portable Charger across the course of the day, with reference to the position of the sun.
If this is not something you desire, we recommend having your panels facing NORTH at
an angle of between 20° and 40° from the ground (Fig. 17). This will ensure the optimum
output from your solar panels across the course of the day, no matter what season.
WARNING: Do not permanently shade any part of the solar panels of the Solar Portable
Charger. This will cause a drastic drop in charging performance of the Solar Portable Charger.
In the southern hemisphere (e.g., Australia), the sun is always in the NORHERN half of the
sky. Therefore, exposing the solar panels of the Solar Portable Charger NORTH, ensures
the best angle to the sun across the course of the day (Fig. 18). In the northern hemisphere
(e.g., United Kingdom), the sun is always in the SOUTHERN half of the sky. Therefore,
exposing the solar panels of the Solar Portable Charger SOUTH, ensures the best angle to
the sun across the course of the day (Fig. 19).
S
E
N
W
N
S
E
W
Panel
facing
NORTH
Panel
facing
SOUTH
Path of the
sun always
NORTH
Path of the
sun always
SOUTH
Southern Hemisphere Northern Hemisphere
Fig. 17
Solar Portable
Charger
Solar Portable
Charger
SUN SUN
Fig. 18 Fig. 19

AFTER SALES SUPPORT
1300 777 137
[email protected]
MODEL: EA2265 PRODUCT CODE: 711503 03/2023
16
INSTRUCTIONS (CONT.)
Charging Devices using your Solar Portable Charger
Charging smartphones, power banks and other
USB powered devices from the Solar Portable
Charger, is as easy as inserting the USB
charging cable (not supplied) into one of the
USB ports located on the junction box of the
Solar Portable Charger, inserting the charging
end of the USB charing cable (not supplied)
into the charging port on the device and
placing the Solar Portable Charger in the sun.
1. Open (unfold) your Solar Panel Charger following
instructions on page 10 (Fig. 20).
2. Attach the Solar Portable Charger to an object
using the carabiners (supplied) or lay it on a at,
dry surface where the Solar Portable Charger will
not move. Refer to page 15 for how to position the
Solar Portable Charger to get maximum sunlight
exposure for optimum charging results.
3. Undo the hook and loop tape on the storage pouch so that
you can access the junction box inside (Fig. 21).
4. Remove the USB dust cover (1 or 2) from the USB port (1 or 2)
(Fig. 22).
5. Insert the USB end of your USB charging cable (not supplied)
into the USB port on the junction box (Fig. 23). Connect the
charging end of your USB charging cable (not supplied) to
your device. The charging process has now commenced.
6. Either place the charging device inside the storage pouch and
close the hook and loop tape on the storage pouch, or store
away the charging device in a location that is not exposed to
the sun (e.g., inside your backpack or inside a tent) during the
charging process and close whatever part of the hook and loop
tape you can comfortably close on the storage pouch (Fig. 24).
NOTE: If you are storing the charging device outside the storage
pouch, then while closing the storage pouch, be careful to not
PRESS against the charging cable (not supplied) while closing
the storage pouch, as the hook and loop tape can cause wear and
tear to the charging cable over time.
7. When your device is fully charged, or you have nished charging, disconnect the USB
charging cable from the USB Port on the junction box of the Solar Portable Charger. Follow
the instructions on page 10 for how to close (fold) the Solar Portable Charger for storage.
Fig. 20
Fig. 21
Fig. 22
Fig. 23
Fig. 24

AFTER SALES SUPPORT
1300 777 137
[email protected]
MODEL: EA2265 PRODUCT CODE: 711503 03/2023 17
INSTRUCTIONS (CONT.)
NOTE: The Solar Portable Charger can measure the real time charging current, which is
displayed on the current display (see page 9). The value for the charging current depends
on the device being charged, sunlight intensity, orientation of the Solar Portable Charger,
and specication of the USB charging cable (not supplied). E.g., if your device has an input
current of 1A, the amount displayed on the current display under best charging set up will
never exceed 1A. If you are charging two devices using the Solar Portable charger and each
device is drawing a 1A current, then the current display will show 2A.
NOTE: The Solar Portable Charger uses Smart IC Technology which enables the Solar
Portable Charger to detect your device and then deliver its fastest possible charging speed.
NOTE: The Solar Portable Charger will only charge USB rechargeable devices that need
a 5V DC input voltage (no extra voltage). The Solar Portable Charger does not support
charging laptops and large portable power stations.
NOTE: If the charging current is under 70mA, or the current draw from the charging
device is under 200mA, then the junction box will enter a state of low current
shutdown followed by restart. This is not a product fault. If this persists you should wait
for better conditions or consider alternate methods to charge your device.
NOTE: The Solar Portable Charger has inbuilt overcurrent and short circuit protection.
If the device being charged or the USB charging cable (not supplied) is faulty, then
there is a possibility that the current draw will exceed the rated current of the charging
device. The junction box will sense this spike in charging current and will shut down
automatically. At this stage, you can unplug the USB charging cable (not supplied) from
the USB port/s and check the USB Charging cable (not supplied) and charging device
for any fault. After approximately 10 seconds, the Solar Portable Charger will reboot
and restart the charging process, so once you have a working USB charging cable (not
supplied) and charging device, you can follow the steps on page 16 to charge the device
using the Solar Portable Charger. If the fault exists, the Solar Portable Charger will remain
in shutdown. At this time, please call our After Sales Support on 1300 777 137 for advice.
WARNING: The Solar Portable Charger can only charge compatible devices with
rechargeable batteries. Attempting to charge non-compatible devices or devices with
non-rechargeable batteries may cause product failure, damage the Solar Portable
Charger or harm to the user.
WARNING: The devices being charged using the Solar Portable Charger may not be
suitable for long term sunlight exposure. Excessive heat may cause damage. Always
refer to the guidelines provided by the manufacturer of the device being charged to
avoid any hazard or possible product failure.

AFTER SALES SUPPORT
1300 777 137
18
[email protected]
MODEL: EA2265 PRODUCT CODE: 711503 03/2023
Solar Portable Charger
Repair and Refurbished
Goods or Parts Notice
REGISTER YOUR PURCHASE AT www.aldi.com.au/en/about-aldi/product-registration/
TO KEEP UP-TO-DATE WITH IMPORTANT PRODUCT INFORMATION
Unfortunately, from time to time, faulty products are manufactured which need to be returned to the
Supplier for repair.
Please be aware that if your product is capable of retaining user-generated data (such as les stored on a
computer hard drive, telephone numbers stored on a mobile telephone, songs stored on a portable media
player, games saved on a games console or les stored on a USB memory stick) during the process of repair,
some or all of your stored data may be lost.
We recommend you save this data elsewhere prior to sending the product for repair.
You should also be aware that rather than repairing goods, we may replace them with refurbished goods of
the same type or use refurbished parts in the repair process.
Please be assured though, refurbished parts or replacements are only used where they
meet ALDI’s stringent quality specications.
If at any time you feel your repair is being handled unsatisfactorily, you may escalate your complaint. Please
telephone us on 1300 777 137 or write to us at:
UNCLE BILL’S AUSTRALIA PTY LTD
48B Egerton Street, Silverwater NSW 1811 Australia
1300 777 137 Opening Hours - 9:00am - 4:30pm (Mon-Fri), 9:00am - 3:00pm (Sat)
[email protected] www.signifyelectronics.com.au

AFTER SALES SUPPORT
1300 777 137
[email protected]
MODEL: EA2265 PRODUCT CODE: 711503 03/2023 19
FREQUENTLY ASKED QUESTIONS
Question Answer
Is the Solar Portable
Charger waterproof?
• The Solar Portable Charger is weather resistant. We've
gone to great lengths to ruggerdise the Solar Portable
Charger; including beeng up the manufacturing process
with advanced lamination techniques so it'll fend off low
pressure water/rain from any direction. However, the
Solar Portable Charger is not built for use in high pressure
water/heavy rain, and it cannot be totally submerged
underwater. If exposed to heavy rain, make sure to dry
completely before using it again.
Does the Solar
Portable Charger
have a built-in
battery?
• No. To make the Solar Portable Charger as lightweight
as possible, battery packs such as power banks are to
be purchased as a separate accessory. You can either
plug your smartphone or device into the Solar Portable
Charger to charge up directly from the sun, or charge an
energy storage device like a power bank to collect and
store power for later. The Solar Portable Charger works
seamlessly with most common brands of power banks.
Can you chain
multiple Solar
Portable Chargers
together to charge
your device from the
sun in less time?
• No. The Solar Portable Chargers are independent charging
devices. They cannot be combined with each other in
a chain. A single Solar Portable Charger can charge a
maximum of two devices at a time. The charging speed
will primarily depend on the positioning of the Solar
Portable Charger and the availability of sunlight.
Why am I having
trouble charging my
smartphone?
• Some smartphones require very specic and constant
power.
• Ensure that the Solar Portable Charger is receiving
adequate sunlight.
• If adequate sunlight is not available, it is recommended
to wait until there is more available sunlight and then try
again.
• Check that the USB charging cable (not supplied) is
compatible with your device and approved for use by the
manufacturer of your device.
• If your smartphone still does not charge, contact the After
Sales Support on 1300 777 137 for advice.

AFTER SALES SUPPORT
1300 777 137
[email protected]
MODEL: EA2265 PRODUCT CODE: 711503 03/2023
20
OTHER USEFUL INFORMATION
Cleaning and Maintenance
Your Solar Portable Charger is an energy conversion device. Follow these guidelines below
to keep your Solar Portable Charger in the best possible condition.
• When you are not using the Solar Portable Charger, it is recommended to pack the
Solar Portable Charger away for safe storage.
• The Solar Portable Charger is likely only to require regular “dusting” to keep it clean.
Use a dry microbre cloth or standard duster, to remove the dust from the Solar
Portable Charger. Clean the dust from the Solar Portable Charger regularly.
• If the Solar Portable Charger becomes soiled with anything other than dust, clean the
Solar Portable Charger by wiping over the surface with a slightly damp cloth or wet
sponge and then pat dry with a soft microbre cloth.
• Do not use detergents, chemical cleaning agents, or abrasive cleaners, and do not
allow moisture, water, or other liquid to enter the Solar Portable Charger.
Storage
• When the Solar Portable Charger is not in use, unplug all USB charging cables from
the USB ports on the junction box. Now slip the USB dust covers (attached to junction
box) into the vacant USB ports to temporarily seal the USB ports. If required, store
all accessories like carabiners, USB charging cables (not supplied) etc. in the storage
pouch and close the storage pouch by pressing the hook and loop tape together. Once
the storage pouch is closed you may now fold and close the Solar Portable Charger
(see page 10). Once Solar Portable Charger is securely closed, store it in a cool, dry, and
well ventilated location out of direct sunlight. Ensure that it is not subject to humidity.
NOTE: If the Solar Portable Charger has been exposed to rain or moisture, allow it to
dry completely before folding away.
WARNING: Do not store any sharp objects inside the storage pouch as they can pierce
the storage pouch and cause damage to the Solar Portable Charger. This will void the
warranty.