SIIG JU-EP0012-S1 User manual

1
USB to ExpressCard
Quick Installation Guide
Introducing the USB to ExpressCard
The USB to ExpressCard is the perfect choice for computer
users who wish to share their USB-based ExpressCards*
between notebook and desktop systems.
Features and Benefits
• Compliant with USB Specification, Revision 2.0
• Hot-plug and hot-swap support allows for you to
connect/detach devices without first turning off
the system
• Works with USB-based ExpressCards including
EVDO data cards, flash memory, flash card
adapters,security,legacyI/O(PS2,serial,parallel),
optical disk drives, GPS receivers and more
*Note: This adapter works only with USB-based
ExpressCard devices. Check your ExpressCard
device's manual for additional information.
Serial Number Sticker
For future product return or exchange, this serial number
is required. Please keep it for your reference.
04-0518C

2
System Requirements
• PC or Mac notebook or desktop computer with an
available USB port
• Windows®
8 (32-/64-bit) / 7 (32-/64-bit) / Vista (32-
/64-bit) / XP (32-/64-bit) / Server 2003 & 2008 (32-
/64-bit) / Server 2008 R2 / 2000
• Mac OS X v10.3.0 or later
Package Contents
•USB to ExpressCard
• Quick installation guide
Layout
Figure 1. Layout
ExpressCard slot
USB port
ConnectionLED

3
Installing the USB to ExpressCard
In order for the USB to ExpressCard to work properly, the
existing USB host adapter must be working properly.
Simply plug the adapter into any USB port and it is ready
for use, no driver installation is needed.
Note: You may have to install drivers for your
ExpressCard device. Please refer to the
ExpressCard device's manual for more
information.
Inserting/Removing ExpressCards
• To insert, gently slide your ExpressCard device
into the ExpressCard slot of the USB to ExpressCard
until it stops.
• To remove, gently pull your ExpressCard device
out of the ExpressCard slot of the USB to
ExpressCard.

4
Blank Page

5
Blank Page

6
Blank Page

7
Technical Support and Warranty
QUESTIONS? SIIG’s Online Support has answers! Simply visit our web site at
www.siig.com and click Support. Our online support database is updated daily with
new drivers and solutions. Answers to your questions could be just a few clicks away.
You can also submit questions online and a technical support analyst will promptly
respond.
SIIG offers a 5-year manufacturer warranty with this product. This warranty covers the
original purchaser and guarantees the product to be free of any defects in materials or
workmanship for five (5) years from the date of purchase of the product.
SIIG will, at our discretion, repair or replace (with an identical product or product
having similar features and functionality) the product if defective in materials or
workmanship. This warranty gives you specific legal rights, and you may also have other
rights which vary from state to state. Please see our web site for more warranty details.
If you encounter any problems with this product, please follow the procedures below.
A) If it is within the store's return policy period, please return the product to the store
where you purchased from.
B) If your purchase has passed the store's return policy period, please follow the steps
below to have the product repaired or replaced.
Step 1: Submit your RMA request.
Go to www.siig.com, click Support, then REQUEST A PRODUCT REPLACEMENT
to submit a request to SIIG RMA or fax a request to 510-657-5962. Your RMA request
will be processed, if the product is determined to be defective, an RMA number will
be issued.
Step 2: After obtaining an RMA number, ship the product.
• Properly pack the product for shipping. All accessories that came with the
original package must be included.
• Clearly write your RMA number on the top of the returned package. SIIG will
refuse to accept any shipping package, and will not be responsible for a product
returned without an RMA number posted on the outside of the shipping
carton.
• You are responsible for the cost of shipping to SIIG. Ship the product to the
following address:
SIIG, Inc.
6078 Stewart Avenue
Fremont, CA 94538-3152, USA
RMA #:
• SIIG will ship the repaired or replaced product via Ground in the U.S. and
International Economy outside of the U.S. at no cost to the customer.

PRODUCT NAME
USB to ExpressCard
FCC RULES: TESTED TO COMPLY WITH FCC PART 15, CLASS B
OPERATING ENVIRONMENT: FOR HOME OR OFFICE USE
FCC COMPLIANCE STATEMENT:
This device complies with part 15 of the FCC Rules. Operation is subject
to the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
THE PARTY RESPONSIBLE FOR PRODUCT COMPLIANCE
SIIG, Inc.
6078 Stewart Avenue
Fremont, CA 94538-3152, USA
Phone: [phone]
About SIIG, Inc.
Founded in 1985, SIIG, Inc. is a leading manufacturer of IT connectivity
solutions (including Serial ATA and Ultra ATA Controllers, FireWire, USB,
and legacy I/O adapters) that bridge the connection between Desktop/
Notebooksystems and externalperipherals. SIIG continues togrow by adding
A/V and Digital Signage connectivity solutions to our extensive portfolio.
SIIGproductsoffer comprehensive user manuals, manyuser-friendlyfeatures,
and are backed by an extensive manufacturer warranty. High quality control
standards are evident by the overall ease of installation and compatibility of
our products, as well as one of the lowest defective return rates in the industry.
SIIG products can be found in computer retail stores, mail order catalogs,
throughmajor distributors, system integrators, andVARs in the Americas and
the UK, and through e-commerce sites.
USB to ExpressCard is a trademark of SIIG, Inc. SIIG and the SIIG logo are registered
trademarks of SIIG, Inc. Microsoft and Windows are registered trademarks of Microsoft
Corporation. All other names used in this publication are for identification only and may be
trademarks of their respective owners.
October, 2012 Copyright © 2012 by SIIG, Inc. All rights reserved.