Silk'n ND-FM02 User manual

LED FACE MASK 100
EN
EN
USER MANUAL
DE
BENUTZERHANDBUCH
FR
MODE D’EMPLOI
NL
GEBRUIKSAANWIJZING
ES
MANUAL DE USUARIO
PT
MANUAL DO UTILIZADOR
GR
ΟΔΗΓΙΕΣ ΧΡΗΣΗΣ
TR
KULLANIM KILAVUZU
IT
MANUALE D’USO
NO
BRUKERHÅNDBOK
SV
ANVÄNDARMANUAL
DA
BRUGERVEJLEDNING
DE
TR
FR
IT
NL
NO
ES
SV
PT
DA
EN
GR
ND-FM02

B C
A
2
EN
1
34
2
5 6
7
9
10
8
13
12
11
14
3
4
1. 2.
1
DE
TR
FR
IT
NL
NO
ES
SV
PT
DA
EN
GR
4
3

3
Copyright 2023 © Silkn Beauty Ltd. All rights reserved.
Legal notice
Invention Works B.V. reserves the right to make changes to its
products or specifications to improve performance, reliability, or
manufacturability. Information furnished by Invention Works B.V.
is believed to be accurate and reliable at the time of publication.
However, Invention Works B.V. assumes no responsibility for its
use. No license is granted by its implication or otherwise under
any patent or patent rights of Invention Works B.V.
No part of this document may be reproduced or transmitted in any
form or by any means, electronic or mechanical, for any purpose,
without the express written permission of Invention Works B.V.
Data is subject to change without notification.
Silkn Beauty Ltd. has patents and pending patent applications,
trademarks, copyrights, or other intellectual property rights covering
subject matter in this document. Thefurnishing of this document
does not give you any license to these patents, trademarks,
copyrights, or other intellectual property rights except as expressly
provided in any written agreement from Silkn Beauty Ltd.
Specifications are subject to change without notice.
Silk’n and the Silk’n logo are registered trademarks of
Silkn Beauty Ltd.
Invention Works B.V.
Galileïstraat 17, 3029 AL Rotterdam, The Netherlands
www.silkn.eu – [e-mail]
EN

4
EN
Table of contents
1 Package contents/device parts ______________ 5
2 General information _______________________ 5
2.1 Reading and storing the user manual __________________________ 5
2.2 Explanation of symbols_____________________________________ 5
3 Safety _____________________________________ 7
3.1 Proper use ______________________________________________ 7
3.2 Safety instructions ________________________________________ 7
4 Checking the product and package contents _ 10
5 Charging __________________________________ 11
6 Assembly__________________________________ 12
7 Operation _________________________________ 12
7.1 Carrying out the session____________________________________ 12
7.2 Manual mode ____________________________________________ 13
7.3 Auto mode ______________________________________________ 14
8 Regimen___________________________________ 14
9 Cleaning___________________________________ 14
10 Storage____________________________________ 15
11 Troubleshooting ___________________________ 15
12 Technical data _____________________________ 16
12.1 General_________________________________________________ 16
12.2 USB wall adapter _________________________________________ 16
13 Disposal ___________________________________ 17
13.1 Disposing of the packaging __________________________________ 17
13.2 Disposing of the product ___________________________________ 17
14 Warranty__________________________________ 18
15 Customer service __________________________ 18

5
EN 1 Package contents/device parts
1Face mask 8Program indicator light, 4×
2Plug 9Manual mode indicator light
3Large elastic strap, 2× 10 Mode button
4Small elastic strap, 2× 11 Charging port
5USB cable 12 Auto mode indicator light
6USB wall adapter 13 Operation button ( )
7Connector 14 Remote control
2 General information
2.1 Reading and storing the user manual
This user manual accompanies this LED Face Mask
100 (hereafter referred to as the “product”), and
contains important information on setup and
handling.
Before using the product, read the user manual
carefully. This particularly applies to the safety instructions. Failure
to do so may result in personal injury or damage to the product.
The user manual is based on the standards and rules in force
in the European Union. When abroad, you must also observe
country-specific guidelines and laws. Store the user manual for
further use. Make sure to include this user manual when passing
the product on to third parties.
2.2 Explanation of symbols
The following symbols and signal words are used in this user manual,
on the product or packaging.
WARNING!
This signal symbol/word designates a hazard with moderate risk,
which may result in death or severe injury if not avoided.
NOTICE!
This signal word warns of possible damage to property.

6
EN
This signal symbol provides you with useful
additional information on handling and use.
Read the user manual.
Declaration of Conformity: Products labelled with
this symbol meet all applicable provisions of the
European Economic Area.
Declaration of Conformity: Products labelled with
this symbol meet all applicable provisions of the
United Kingdom.
Devices marked with this symbol are only suitable
for household use (dry indoor rooms).
This symbol identifies voltage and the current rating
for direct current.
The word “GS” stands for tested safety. Products
marked with this symbol meet the requirements of
the German Product Safety Act (ProdSG).
IP20 The USB wall adapter is protected against solid
objects up to 12 mm.
The international efficiency mark indicates that
the power supply meets the level VI requirements
(USBwall adapter).
The USB wall adapter is equipped with a short-
circuit proof safety transformer.
The USB wall adapter has a switching power supply.
This symbol indicates the polarity of the pins in the
USB wall adapter.
This symbol identifies electrical devices that belong
to the protection class II.
ta Ambient temperature (USB wall adapter).

7
EN 3 Safety
3.1 Proper use
The product is exclusively designed to recover your skin’s glow,
elasticity and texture. It also helps to reduce the appearance
of fine lines, wrinkles and other skin imperfections. It is only
intended for private use and not suitable for commercial
purposes.
Only use the product as described in this user manual. Any other
use is considered improper and may result in damage to property
or persons. The manufacturer cannot be held liable for damages
or injury incurred through improper or incorrect use.
3.2 Safety instructions
WARNING! RISK OF ELECTRIC SHOCK!
• Only connect the product if the line voltage
of the socket corresponds to the data on
the rating plate of the USB wall adapter.
• Only connect the USB wall adapter to an
easily accessible socket so that you can
quickly disconnect it from the mains supply
in the event of a problem.
• Only use the supplied USB cable and USB
wall adapter for charging. Do not use them
for other purposes.
• Do not use the product, USB cable or
USB wall adapter if they are damaged or
defective. The manufacturer or customer
service must replace the damaged or
defective parts to avoid risks.
• Do not open the housing; instead, have
a qualified professional perform repairs.

8
EN
Contact the customer service team for this.
Liability and warranty claims are waived
in the event of repairs performed by the
user, improper connection or incorrect
operation.
• Only parts that comply with the original
device data may be used for repairs. This
product contains electrical and mechanical
parts which are essential for providing
protection against sources of danger.
• Do not immerse the product, USB cable or
USB wall adapter in water or other liquids.
Keep them away from water.
• Always switch the product o when you are
not using it, when you intend to clean it, or
in the event of a malfunction. Always unplug
the USB wall adapter when you are not
charging the product.
• Never touch the housing, USB cable and
USB wall adapter with wet or damp hands.
• Never insert any objects into the housing.
• Do not pull the USB wall adapter out of the
socket by the USB cable; instead, always pull
it out by the adapter itself. Never move,
pull, or carry the product by the USB cable.
• Keep the product, USB cable and USB wall
adapter away from open flames and hot
surfaces.

9
EN • Lay the USB cable so that it does not pose a
tripping hazard.
• Do not kink the USB cable or wrap it
around the product. Do not lay the USB
cable over sharp edges.
• Only use the product indoors.
• Do not use the product while charging.
WARNING! RISK OF INJURY!
• The product can be used by persons with
reduced physical, sensory or mental capabilities
or lack of experience and knowledge if they
have been given supervision or instruction
concerning the use of the product in a safe
way and understand the hazards involved.
Children must not play with the product.
Cleaning and user maintenance must not be
performed by children.
• The product cannot be used by pregnant
women, children, people with epilepsy,
thyroid patients, people using thyroid
medications, people who are photoallergic
or use light allergy medication.
• The product cannot be used on skin
diseases, wound ulceration, trauma and
post-operative wounds.
• Do not use the product for more than
15minutes per session.

10
EN
• Consult your physician if you are uncertain
whether you can use the product.
• Stop using the product immediately if you
feel any discomfort, develop any abnormal
reactions (such as itching or uncomfortable
inflammation) or in case your skin becomes
warm to the point of discomfort.
• Keep children away from the product, USB
cable and USB wall adapter.
NOTICE! RISK OF DAMAGE!
• Keep the product away from open fire, hot
surfaces, high temperatures or the eects of
the weather (e.g. rain).
• Do not fold or roll up the product.
• Do not stack heavy objects on top of the
product.
• Stop using the product if its parts exhibit
cracks or breaks or are deformed. Only
replace damaged parts with corresponding
original spare parts.
4 Checking the product and package
contents
NOTICE! RISK OF DAMAGE!
• If you are not cautious when opening the
packaging with a sharp knife or other pointed
objects, you may quickly damage the product.
Be very careful when opening it.

11
EN 1. Take the product out of the packaging.
2. Check to make sure that all parts are included (see Fig. A).
3. Check whether the product or individual parts are damaged. If
this is the case, do not use the product. Contact our customer
service.
5 Charging
WARNING! RISK OF INJURY!
• Charge only with the supplied USB cable and
USB wall adapter.
• Only charge the product at temperatures
between 0 and 40 °C.
• Fully charge the product before first use and when the
battery power is low.
• When the battery power is low, the indicator lights
on the remote control 14 will flash 10 times before
switching o automatically. Recharge the product.
• The product cannot be used during charging.
• If the product is to be stored for an extended period,
the charge level should be checked and the lithium
battery should be charged regularly.
1. Connect the plug 2of the face mask 1with the
connector 7of the remote control.
2. Plug the smaller end of the USB cable 5into the charging
port 11 of the remote control.
3. Plug the larger end of the USB cable into the USB port of the
USB wall adapter 6.
You may also connect the USB cable to a compatible USB
power source (5.0 V, 1.0 A, 5.0 W) (e.g. PC, laptop or power-
bank) for charging.
4. Plug the USB wall adapter into a mains socket for charging.
Check the program indicator lights 8for charging progress:
One indicator light = 25 % charged
Two indicator lights = 50 % charged

12
EN
Three indicator lights = 75 % charged
Four indicator lights = fully charged
5. When charging is done, unplug the USB wall adapter from the
mains socket and disconnect the USB cable from the charging
port of the remote control.
6 Assembly
1. Open the hook-and-loop fasteners on the elastic straps 3/4.
2. Guide the small elastic 4straps through the small top
openings and the large elastic straps 3through the large side
openings of the face mask 1(see step 1 in Fig. B).
3. Close the hook-and-loop fasteners to secure the elastic straps
on the face mask (see step 2 in Fig. B).
7 Operation
WARNING! RISK OF INJURY!
• Do not use the product for more than
15minutes per session.
7.1 Carrying out the session
1. Fully charge the product and properly attach the elastic
straps 3/4(see chapter “Charging” and “Assembly”).
2. Thoroughly clean and dry your face and hands. Make sure they
are free from any make-up or dirt.
3. Sit or lie down and place the face mask 1over your face.
4. Use the hook-and-loop fasteners on the ends of the elastic
straps to fit the face mask comfortably on your face.
The small elastic straps 4should be closed at the top of your
head and the large elastic straps 3should be closed at the
back of your head (see Fig. C).
5. Connect the plug 2of the face mask into the connector 7of
the remote control 14 .
6. Press and hold the operation button ( ) 13 to switch on the
product.
By default, the product goes into Manual mode with the M1
(red) program selected after switching on.
7. If desired, press the mode button 10 repeatedly to select
between the Auto mode and Manual mode.

13
EN The corresponding mode indicator light ( 9or 12 ) turns on
according to your selection.
To use the Manual mode, see chapter “Manual mode”.
To use the Auto mode, see chapter “Auto mode”.
8. After the session, remove the face mask and apply a serum
and/or day/night cream on your face.
7.2 Manual mode
• By default, the product goes into Manual mode with the M1
(red) program selected after switching on.
• If another program (M2, M3 or M4) is desired, press the
operation button ( ) 13 1–3 times for selection. The
corresponding program indicator light 8turns on to show
your selection.
Note: The product switches o when the operation
button ( ) is pressed a fourth time.
• When a program is selected, the manual mode indicator light 9
flashes 5 times before the indicator light stays lit and the product
starts the selected program.
• Functions of the programs:
Program LED Best for
M1 Red Reduces fine lines and wrinkles,
stimulates collagen and helps to
improve blood circulation
M2 Blue Reduces acne-related redness and
imperfections for clearer skin
M3 Yellow Improves skin hydration and sooths
dry and sensitive skin
M4 Purple Anti-ageing and reduction of skin
imperfections to improve the skin’s
vitality and radiance
• The session lasts for 10 minutes. The product will switch o
automatically after the session time has elapsed.
• You can also press and hold the operation button ( ) to switch
off the product any time.

14
EN
7.3 Auto mode
• When Auto mode is selected, the auto mode indicator light 12
flashes 5 times before the indicator light stays lit and the product
starts the session.
• In Auto mode, the product will carry out the programs in below
order:
M1 (red): 5 minutes
M2 (blue): 3 minutes
M3 (yellow): 4 minutes
M4 (purple): 3 minutes
• The whole session lasts for 15 minutes. The product will
switch o automatically after the session time has elapsed.
• You can also press and hold the operation button ( ) 13 to
switch off the product any time.
8 Regimen
If you are using the product for the first time, follow the schedule
below:
First week Use once every 3 days, max. 10 minutes at a time
Second week Use once every 2 days, max. 10 minutes at a time
Third week Use once every 2 days, max. 10–15 minutes at
a time
Fourth week Use once every day, max. 10–15 minutes at a
time
As soon as results show, adjust the frequency to once or twice
per week.
9 Cleaning
WARNING! RISK OF ELECTRIC SHOCK!
• Always unplug the product from the power
source before cleaning.

15
EN NOTICE! RISK OF DAMAGE!
• Do not use any aggressive cleaners (e.g.
vinegar or limescale removers), brushes
with metal or nylon bristles, or sharp or
metallic cleaning utensils such as knives, hard
scrapers and the like.
• Do not use hot water for cleaning.
Use a damp cloth or a water-based wipe to wipe o the face
mask 1. Then wipe it dry with a dry cloth.
10 Storage
All parts must be completely dry before being stored.
• Store the product in a clean and dry place, avoiding heat and
direct sunlight.
• Store the product so that it is not accessible to children.
• For best protection, store the product in its original packaging.
11 Troubleshooting
Some problems may be caused by minor faults that you can fix
yourself. To do so, follow the instructions in the following table.
If it is still not possible to resolve the problem, contact customer
service. Do not repair the product yourself.
Fault Possible cause and solution
The product
does not
operate.
• Make sure the product is properly
charged.
• Make sure the product is not connected
to a USB power source. The product does
not work while charging.
The product
does not charge. • Make sure the USB cable is securely connected between the charging port and
the USB power source.

16
EN
12 Technical data
12.1 General
Model: ND-FM02
Rated voltage: 3.7 V
Battery capacity: 1,500 mAh lithium
Number of LED lights: 100
Materials: Food grade silicon, ABS
Weight: 307 g
Dimensions (L × W × H): 383 x 198 x 13.5 mm
12.2 USB wall adapter
Model number: PS06H050K1000EU /
PS06H050K1000BU
Input: 100–240V~, 50/60 Hz, 0.25 A
Output: 5.0V 1.0A, 5.0W
Protection class: II
IP code: IP20
Published information Value and precision Unit
Name or trademark of
the manufacturer,
commercial register
number and address:
Shenzhen Flypower
Technology Co., Ltd
Building A2, Haosan
Linpokeng 2nd Industry
Zone, Nanpu Road,
Shajing, Bao’an, Shenzhen,
Guangdong, China
Model number: PS06H050K1000EU /
PS06H050K1000BU
Input voltage: 100–240 V
Input alternating current
frequency: 50/60 Hz
Output voltage: 5.0 V

17
EN Published information Value and precision Unit
Output current: 1.0 A
Output power: 5.0 W
Average eciency during
operation: 73.62 %
Eciency at low load (10 %): 64.59 (min.) %
Power consumption at
zero load: 0.1 W
13 Disposal
13.1 Disposing of the packaging
Sort the packaging before you dispose of it.
Dispose of paperboard and cardboard with the
recycled paper service and wrappings with the
appropriate collection service.
13.2 Disposing of the product
(Applicable in the European Union and other European countries
with separate collection systems of recyclable materials)
Old appliances may not be disposed of in the
household waste!
Should the product no longer be capable of being used
at some point in time, dispose of it in accordance
with the regulations in force in your city or
county. This ensures that old appliances are recycled
in a professional manner and also rules out negative
consequences for the environment. For this reason, electrical
equipment is marked with the symbol shown here.
Batteries and rechargeable batteries may not be
disposed of with household waste!
As the end user you are required by law to bring all
batteries and rechargeable batteries, regardless
whether they contain harmful substances* or not, to a
collection point run by the communal authority or to
a retailer, so that they can be disposed of in an
environmentally friendly manner.

18
EN
Bring the entire product (including the rechargeable battery) to
your collection point and make sure that it is in an uncharged state!
* labelled with: Cd = cadmium, Hg = mercury, Pb = lead
Note: To remove the rechargeable battery, wrap a towel around
the remote control and use a hammer to smash the housing.
Make sure your eyes and hands are protected to avoid injury.
Please note, the removal of the rechargeable battery is not
reversible.
14 Warranty
This product is covered by a 2-year warranty according to
European regulations and law. The extent of the warranty on this
product is limited to technical defects caused by faulty production
processes. In the event you want to claim warranty please be
sure to contact our customer service for instructions. They may
be able to solve your problem without needing to return the
product to the store or our service center. Our customer service
is always pleased to help you!
15 Customer service
For more information about the products of Silk’n visit your
regional Silk’n website: www.silkn.eu. If the device is damaged,
defective, in need of repair or you need our assistance, please
contact your nearest Silk’n service center. This manual is also
available as a PDF download from: www.silkn.eu.
Service number: 0906-2130009 / [phone]
Email: [e-mail] / [e-mail]

19
DE
Copyright 2023 © Silkn Beauty Ltd. Alle Rechte vorbehalten.
Rechtlicher Hinweis
Invention Works B.V. behält sich das Recht vor, Änderungen an
ihren Produkten oder Spezifikationen vorzunehmen, um die
Leistung, Zuverlässigkeit oder Herstellbarkeit zu verbessern.
Die von Invention Works B.V. zur Verfügung gestellten
Informationen gelten zum Zeitpunkt der Veröentlichung
als korrekt und zuverlässig. Invention Works B.V. übernimmt
jedoch keine Verantwortung für deren Verwendung. Es wird
weder stillschweigend noch anderweitig eine Lizenz im Rahmen
eines Patents oder von Patentrechten von Invention Works B.V.
gewährt.
Kein Teil dieses Dokuments darf ohne ausdrückliche schriftliche
Genehmigung von Invention Works B.V. in irgendeiner Form oder
mit irgendwelchen Mitteln, elektronisch oder mechanisch, für
irgendeinen Zweck vervielfältigt oder übertragen werden. Die
Daten können ohne Vorankündigung geändert werden.
Silkn Beauty Ltd. verfügt über Patente und anhängige
Patentanmeldungen, Warenzeichen, Urheberrechte oder andere
Rechte an geistigem Eigentum, die den Gegenstand dieses
Dokuments abdecken. Durch die Bereitstellung dieses Dokuments
erhalten Sie keine Lizenz für diese Patente, Warenzeichen,
Urheberrechte oder andere Rechte an geistigem Eigentum, es sei
denn, dies ist ausdrücklich in einer schriftlichen Vereinbarung mit
Silkn Beauty Ltd. vorgesehen. Die Spezifikationen können ohne
vorherige Ankündigung geändert werden.
Silk’n und das Silk’n-Logo sind eingetragene Warenzeichen von
Silkn Beauty Ltd.
Invention Works B.V.
Galileïstraat 17, 3029 AL Rotterdam, Die Niederlande
www.silkn.eu – [e-mail]

20
DE
Inhaltsübersicht
1 Verpackungsinhalt/Geräteteile______________ 21
2 Allgemeine Informationen__________________ 21
2.1 Benutzerhandbuch lesen und aufbewahren_____________________ 21
2.2 Erläuterung der Symbole ___________________________________ 21
3 Sicherheit _________________________________ 23
3.1 Ordnungsgemäße Verwendung ______________________________ 23
3.2 Sicherheitsanweisungen ____________________________________ 23
4 Produkt und Verpackungsinhalt überprüfen _ 27
5 Aufladen __________________________________ 28
6 Zusammenbau_____________________________ 29
7 Betrieb ____________________________________ 29
7.1 Sitzung durchführen _______________________________________ 29
7.2 Manueller Modus _________________________________________ 30
7.3 Automatikmodus _________________________________________ 31
8 Anwendungsplan___________________________ 31
9 Reinigung__________________________________ 32
10 Lagerung __________________________________ 33
11 Fehlerbehebung____________________________ 33
12 Technische Daten __________________________ 33
12.1 Allgemein _______________________________________________ 33
12.2 USB-Steckernetzteil _______________________________________ 34
13 Entsorgung ________________________________ 35
13.1 Verpackung entsorgen _____________________________________ 35
13.2 Produkt entsorgen ________________________________________ 35
14 Garantie___________________________________ 36
15 Kundendienst ______________________________ 36