Silvercrest SMZCD 400 A1 User manual

IAN 89366
MINI CHOPPER SMZCD 400 A1
MULTIZERKLEINERER
Bedienungsanleitung
MINI CHOPPER
Operating instructions
UNIVERZÁLNÍ DRTIČ
Návod k obsluze
ROZDRABNIACZ UNIWERSALNY
Instrukcja obsługi
KONYHAI APRÍTÓ
Használati utasítás

GB Operating instructions Page 1
PL Instrukcja obsługi Strona 13
HU Használati utasítás Oldal 25
CZ Návod k obsluze Strana 37
DE/AT/CH Bedienungsanleitung Seite 49
Before reading, unfold the page containing the illustrations and familiarise yourself with all functions of
the device.
Przed przeczytaniem proszę rozłożyć stronę z ilustracjami, a następnie proszę zapoznać się z wszystkimi
funkcjami urządzenia.
Olvasás előtt kattintson az ábrát tartalmazó oldalra és végezetül ismerje meg a készülék mindegyik
funkcióját.
Před čtením si otevřete stranu s obrázky a potom se seznamte se všemi funkcemi přístroje.
Klappen Sie vor dem Lesen die Seite mit den Abbildungen aus und machen Sie sich anschließend mit allen
Funktionen des Gerätes vertraut.

1
2
6
7
4
3
8
5

1
SMZCD 400 A1
GB
Index
Introduction. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Copyright. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Intended use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Safety instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Items supplied . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Operating components. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Initial Preparations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Unpacking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Disposal of the packaging. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Chopping . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Cleaning and care. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Storage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Disposal of the appliance. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Technical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Notes on the Declaration of Conformity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Importer. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

2SMZCD 400 A1
GB Introduction
Congratulations on the purchase of your new appliance.
You have clearly decided in favour of a high-quality product. These operating
instructions are a part of this product. They contain important information on
its safety, use and disposal. Familiarise yourself with all of these operating and
safety instructions before using the product. Use this appliance only as described
and only for the specified areas of application. Additionally, pass these instruc-
tions on to whoever might acquire the appliance at a future date.
Copyright
This documentation is copyright protected.
Any copying or reproduction of it, including as extracts, as well as the reproduction
of images, also in an altered state, is only permitted with the written authorisation
of the manufacturer.
Intended use
This appliance is intended exclusively for chopping small quantities of boneless
foodstuffs.
This appliance in intended exclusively for use in domestic households. Do not use
the appliance commercially!
WARNING
Risks from unintended use!
Risks can be engendered if the appliance if used for unintended purposes
and/or other types of use.
► Use the appliance exclusively for its intended purposes.
► Pay heed to the procedures described in these operating instructions.
Claims of all kinds resulting from damage caused by improper use, incompetent
repairs, unauthorised modifications or the use of unauthorised spare parts are
excluded.
The operator alone bears liability.

3
SMZCD 400 A1
GB
Safety instructions
In this chapter you will receive important safety information regarding the handling
of the appliance.
This appliance complies with the statutory safety regulations.
Incorrect usage can lead to personal injury and property damage.
For safe handling of the appliance observe the following safety information:
DANGER - RISK OF ELECTRICAL SHOCK!
► Connect this appliance only to correctly installed mains power sockets
supplying a mains voltage of 220 - 240 V ~/50 Hz.
► To avoid risks, arrange for defective plugs and/or power cables to be
replaced at once by qualified technicians or our Customer Service
Department.
► In the event of operating malfunctions and before cleaning the appliance,
remove the plug from the mains power socket.
► Always remove the power cable from the socket by pulling on the plug,
not on the power cable itself.
► Do not kink or crimp the power cable and place it in such a way as to
prevent anyone from stepping on or tripping over it.
► NEVER immerse the motor unit of the appliance in liquids and do NOT
allow any liquids to enter the housing of the motor unit.
► Do not expose the appliance to humidity and do not use it outdoors.
Should liquids enter the housing, unplug the appliance from the mains
power socket immediately and arrange for it to be repaired by a qualified
technician.
► NEVER take hold of the motor unit, the power cable or the plug with wet
hands.
► If the power cable or the motor unit are damaged, you must have the
appliance repaired by qualified technicians before using it again.
► Do not open the housing of the appliance motor unit. Should you do
so, the safety concept of the appliance may be compromised and the
warranty becomes void.
► Disconnect the appliance from the mains power source immediately after
use. The appliance is completely free of electrical power ONLY when
unplugged.

4SMZCD 400 A1
GB WARNING - RISK OF INJURY!
► This appliance is not intended for use by individuals (including children)
with restricted physical, physiological or intellectual abilities or deficiences
in experience and/or knowledge unless they are supervised by a person
responsible for their safety or receive from this person instruction in how the
appliance is to be used.
► Children should be supervised to ensure that they do not play with the
appliance.
► Handle the extremely sharp blade with caution, it can cause injuries.
Reassemble the appliance after using and/or cleaning it so that you do not
injure yourself with the exposed blade. Keep the blade out of the reach of
children.
► NEVER attempt to remove foodstuffs from the bowl for as long as the blade
is still rotating. Risk of injury!
► Before removing the motor block, wait until the blade has stopped rotating.
NEVER try to grasp the still rotating blade! Risk of injury!
CAUTION - PROPERTY DAMAGE!
► Pay heed to the table regarding the filling quantities given in the chapter
“Chopping”. Exceeding these may cause foodstuffs to spill out.
Items supplied
The appliance is delivered with the following components as standard:
▯ Mini Chopper consisting of:
– Bowl with Stand
– Blade holder
– Lid with sealing ring
– Motor unit
▯ These operating instructions
NOTICE
► Check the contents to ensure everything is present and available and for
signs of visible damage.
► If the delivery is not complete, or is damaged due to defective packaging
or transportation, contact the Service Hotline (see chapter Service).

5
SMZCD 400 A1
GB
Operating components
1Turbo button
2Motor unit
3Lid
4Sealing ring
5Blade holder
6Blade
7Bowl
8Appliance base
Initial Preparations
Unpacking
♦ Remove all components of the appliance and these operating instructions
from the carton.
♦ Remove all packaging material.
♦ Clean all of the components as described in the section "Cleaning and
care".
Disposal of the packaging
The packaging protects the appliance from transport damage. The packaging
materials are selected from the point of view of their environmental friendliness
and disposal technology and are therefore recyclable.
The recirculation of packaging into the material circuit saves on raw material and
reduces the amount of waste generated. Dispose of packaging material that is
no longer needed as per the regionally established regulations.
NOTICE
► If possible preserve the appliance's original packaging during the warranty
period so that, in the event of a warranty claim, you can package the appli-
ance ideally for its return.

6SMZCD 400 A1
GB Chopping
1) Place the bowl 7in the appliance base 8.
2) Place the blade holder 5with the blade 6on the drive shaft in the interior
of the bowl 7.
3) Prepare the items to be processed by cutting large pieces to a size that will
fit in the bowl 7.
4) Place the food to be processed in the bowl 7. Thereby, pay heed to the
following table:
Foodstuff
max.
filling
quantity
Processing time Speed
Hazelnuts 200 g
Coarse: 1 x 10 Seconds
Middle: 2 x 10 Seconds
Fine: 3 x 10 Seconds
turbo
Cheese (Gouda,
old, at refrigerator
temperature)
100 g 2 x 5 Seconds turbo
Onions 100 g pulsating (max. 20 Seconds) turbo
Garlic 100 g pulsating (max. 20 Seconds) normal
Carrots 200 g 2 x 5 Seconds turbo
Parsley 20 g pulsating (max. 20 Seconds) turbo
Almonds 200 g
Coarse: 1 x 10 Seconds
Middle: 2 x 10 Seconds
Fine: 3 x 10 Seconds
turbo
Apple 200 g 3 x 5 Seconds turbo
Walnuts 100 g 1 x 8 Seconds turbo
Ice cubes 100 g pulsating (max. 20 Seconds) turbo
Whole milk/dark
chocolate (stand-
ard 100 g bar)
100 g 1 x 10 Seconds turbo
Beef (tender,
tendons/bones
removed, cut into
cubes
(about 2 x 2cm))
250 g pulsating (max. 20 Seconds) turbo

7
SMZCD 400 A1
GB
5) Ensure that the sealing ring 4is inserted into the lid 3: the two rubber lips
on the sealing ring 4must engage in the plastic rail in the interior of the lid 3.
6) Then close the bowl 7with the lid 3: Place it on the bowl 7so that the
lugs on the lid 3engage in the slots on the bowl 7. Then turn the lid 3
so that the lugs slide unter the slots and the lid 3locks into place.
7) Place the motor unit 2on the lid 3.
8) Insert the plug into a mains power socket.
9) Press the motor unit 2down to start the motor at normal operating speed.
10) To obtain the higher processing speed “Turbo“ for the contents, in addition
to the motor unit 2press and hold down the turbo button 1. As soon
as you release the turbo button 1the appliance returns to the normal
operating speed.
NOTICE
► Should larger pieces of the contents collect on the wall of the bowl while
processing, lift the motor unit 2from the lid 3. Shake the bowl 7vigorously
and then continue with the processing. Remove possible residues with a
dough scraper.
► Before starting the processing, particularly hard foods must be cut into
smaller pieces (about 2cm). Otherwise, the motor will block. Select a
pulsating processing for hard foodstuffs. For this, press the turbo button
1repeatedly for a short time (in addition to the motor block 2). Should
the foodstuff not be completely chopped, you can either cut it into smaller
pieces or lift the motor unit 2from the lid 3. Shake the bowl 7vigor-
ously and then continue with the processing.
11) When the contents have been sufficiently chopped, release the motor unit 2
and, if necessary, the turbo button 1.
12) Remove the power plug from the mains power socket.
WARNING - RISK OF INJURY!
► Never attempt to remove foodstuffs from the bowl 7as long as the
blade 6is still rotating. Contents could shoot out and make a mess.
13) Wait until the blade 6has stopped rotating.
14) Lift the motor unit 2from the lid 3and remove it.