Silvercrest SKD 2300 A1 User manual

IAN 90866
CONVECTION HEATER SKD 2300 A1
CONVECTION HEATER
Operating instructions
CONVECTOR
Instrucţiuni de utilizare
ΑΕΡΌΘΕΡΜΟ
Οδηγία χρήσης
KONVEKTOR
Upute za korištenje
КОНВЕКТОР
Pъководство за обслужване
KONVEKTOR
Bedienungsanleitung
RP90866_Konvektor_Cover_LB7.indd 2 02.07.13 10:50

English . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Be sure to note the fold-out page.
Hrvatski . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Molimo obratiti pažnju na stranicu na rasklapanje
Română . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Vă rugăm să rețineți pagina cu privire de ansamblu
Български . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
Моля, обърнете внимание на страницата с общ преглед
Ελληνικά . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
Παρακαλούμε προσέξτε την εσωτερικά διπλωμένη σελίδα του εξώφυλλου
Deutsch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60
Bitte beachten Sie die Ausklappseite
SKD2300A1_13_V1.4_GB_HR_RO_BG_GR_DE
RP90866 Konvektor LB7 Seite 1 Montag, 22. Juli 2013 3:23 15

4
10
6
9
7
2
23
12
24
14
18
19
5
25 15
15 18
24
22
16
3
16
17
11
22
25
17
1
13
21 20
8
RP90866 Konvektor LB7 Seite 1 Montag, 22. Juli 2013 3:23 15

2
Contents
1. Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
2. Names of parts (see fold-out page). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
3. Technical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
4. Safety information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
5. Unpacking, setting up and inserting the batteries . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
6. Operating. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
7. Cleaning. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
8. Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
9. Disposal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
10. HOYER Handel GmbH Warranty. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Congratulations on the purchase of
your new product.
You have selected a high-quality product.
The operating instructions are a constituent
part of this product. They contain important
information about safety, use and disposal.
Familiarize yourself with all the operating
and safety instructions before using the
product. Use the product only as described
and for the stated spheres of application.
If you pass the product on to a third party,
always pass on all the documentation as
well.
1. Description
1.1 Intended purpose
This SilverCrest SKD2300A1 convector
heater may be used to heat dry rooms.
This appliance is intended for private use
and is not suitable for commercial purposes.
The appliance is suitable for providing
auxiliary heating. It is not suitable for use on
its own to heat large spaces.
The appliance is floor standing only.
1.2 Scope of supply
• 1 convector heater
• 1 remote control
• 2 batteries type AAA/LR03 1.5 V
• 2 feet
• 2 screws for feet
• 1 set of operating instructions
1.3 Symbols on the appliance
The adjacent symbol 3warns
against covering the appliance
as this could cause a build up of
heat leading to damage and the
risk of fire.
RP90866 Konvektor LB7 Seite 2 Montag, 22. Juli 2013 3:23 15

SKD2300A1 3
2. Names of parts (see fold-out page)
1Rest for remote control
2Control panel
3Warning symbol - “Do not cover”
4Air outlet
5Display
6Air inlet
7Feet
8Temperature sensor
9Mains switch
10 Handle
11 Selected heating level display
12 "Fan" symbol
13 "Frost protection" symbol
14 Selected unit of measurement display
15 Fan button
16 Increase temperature
17 Reduce temperature
18 Timer button
19 Running time display
20 Set temperature display
21 Measured temperature display
22 On/Off button
23 Infrared receiver for remote control
24 Button for selecting unit of measurement
25 Button for selecting the heat setting
3. Technical data
Power supply: 220 - 240 V~/50 Hz
Maximum power: 2,300 watts
Protection class: I
Batteries for remote control: 2x type AAA/LR03 1.5 V
Ambient conditions: 0 °C to +25 °C, max. 85 % relative humidity
4. Safety information
4.1 Terms used
The following signalling terms are found in
these Operating Instructions:
Warning!
High risk. Disregarding the
warning may cause injury to life
and limb.
Caution!
Medium risk. Disregarding the warning may
cause damage to property.
Note:
Low risk. Circumstances that should be taken
into account when dealing with this
appliance.
4.2 General information
• Before using the appliance, be sure to
read these Operating Instructions
carefully. They are a component part of
the appliance and must be available at
all times.
RP90866 Konvektor LB7 Seite 3 Montag, 22. Juli 2013 3:23 15

4
• Use the appliance only for the purpose
described (see “1.1 Intended purpose”
on page 2).
• Check whether the mains voltage (see
type plate on the appliance) agrees with
your mains voltage.
• This device is not intended to be used by
individuals (including children) with
limited physical, sensory or mental
capabilities or with a lack of experience
and/or lack of knowledge, unless
supervised by a person responsible for
their safety or they have received
instructions from such a person as to
how to use the device. Children should
always be supervised to ensure that they
do not play with the device.
• If there should be any malfunctions, the
appliance may only be repaired by our
Service Centre.
• The appliance must only be set up on a
firm, level, dry and non-flammable
surface.
• Check that the power socket is easily
accessible so that you can pull out the
mains plug quickly if necessary.
4.3 Protection against electric shock
Warning! The following safety
information is intended to protect
you against electric shock.
• Only plug the appliance into a correctly
installed, earthed wall socket.
• Do not use the appliance if it has fallen
on the floor, received a hard blow or
fallen into water. In this case, please
contact our Service Centre. The contact
data can be found in “Service Centre”
on page 12.
• The appliance must not under any
circumstances be used if it is damaged.
Have the device repaired in such cases
by a qualified specialist. The contact
data can be found in “Service Centre”
on page 12.
• If the mains cable for this appliance is
damaged, it must be replaced by the
manufacturer or a person with similar
qualifications in order to avoid a
hazard.
• Never use the appliance in the
immediate vicinity of a sink, bath tub,
shower or swimming pool as splashes
might enter the appliance.
• Water or other liquids must never be
allowed to enter the appliance. For this
reason:
– never use outdoors;
– never place containers filled with
liquid, such as drinking glasses, vases
etc. on the appliance;
– never use in a very damp environment
such as a bathroom.
If nonetheless liquid does enter the
appliance, unplug the mains plug
immediately and have the appliance
repaired by a qualified specialist. The
contact data can be found in “Service
Centre” on page 12.
• Never insert fingers or any objects
through the protective guards into the
inside of the appliance.
• Never touch the appliance, the mains
cord or the mains plug with moist hands.
• Always pull the mains cord out by the
plug. Never pull it by the cord itself.
• Ensure that the mains cable is not kinked,
twisted or crushed.
• Ensure that the mains cable is not
damaged on sharp edges.
• Keep the mains cord away from hot
surfaces (such as stove eyes).
• If you are not using the appliance for a
prolonged period of time, remove the
plug from the wall socket. Only then is
the appliance completely free of current.
RP90866 Konvektor LB7 Seite 4 Montag, 22. Juli 2013 3:23 15

SKD2300A1 5
• You should avoid using extension cords.
This is only allowed under very
particular conditions:
– The extension cord has to be suited for
the appliance's amperage.
– The extension cord must not be
installed "loose": it must not be
possible to trip over it or within the
reach of children.
– The extension cord must not by any
means be damaged.
– No other devices other than this
appliance must be connected to the
mains socket, as otherwise
overloading of the power supply
network could occur (multiple sockets
are not allowed!).
• The appliance must not be operated
with an external time switch or separate
remote control system, such as a wireless
remote control socket.
4.4 Protection against the danger of fire
Warning! As the appliance
works at high temperatures, please
observe the following safety
information to prevent fire.
• While the appliance is operating, there
must be no flammable objects (e.g.
curtains, paper) in the immediate vicinity
of the appliance.
• Never use the appliance to dry textiles
or other items on, over or in front of the
appliance.
• To avoid overheating, the appliance
must never be covered.
• When setting up the appliance, maintain
a minimum distance of 1 m from other
appliances and the wall.
• Never operate the appliance in rooms
where there is a risk of explosion or in
the vicinity of flammable gases or
liquids.
• The appliance must never be placed
immediately beneath a wall socket, as
the heat it generates could damage the
electrical installation.
• Always check that air can freely enter
and escape. Heat might otherwise build
up inside the appliance.
• Never leave the appliance running
when it is unattended. The presence of
odour is almost always an indication of
damage. If you notice any such odour,
unplug the mains plug immediately and
have the appliance inspected. The
contact data can be found in “Service
Centre” on page 12.
4.5 Protection against injury
Warning! To avoid injury, please
observe the following information.
• Ensure that it is not possible for anyone
to trip over or to get caught up in or step
on the mainscable.
• Once hot, if you wish to transport the
appliance, switch it off, pull out the
mains plug, and wait until the appliance
has cooled down. Otherwise you could
burn yourself on the hot surface.
4.6 For the safety of your child
Warning! Children often cannot
assess dangers correctly and are
injured as a result. Please therefore
observe the following:
• This product may only be used under
adult supervision to ensure that children
do not play with the appliance.
• Always take care to ensure the
appliance is kept out of the reach of
children at all times.
RP90866 Konvektor LB7 Seite 5 Montag, 22. Juli 2013 3:23 15

6
• The remote control contains batteries.
Ensure that they are kept out of the reach
of children and are not swallowed.
Ingested batteries can be highly
dangerous. Obtain medical assistance
immediately if batteries are swallowed.
4.7 Handling batteries
Warning!
To prevent a risk of explosion,
normal batteries must not be
charged, heated or disposed of by
burning.
If battery acid has leaked, avoid
contact with skin, eyes and mucous
membranes to prevent injury. In the
event of contact with the acid, rinse
the affected areas immediately
with plenty of clean water and
contact a doctor at once.
Caution! To avoid damaging the product
and ensure it functions correctly, please
note:
• Always replace all batteries at the same
time.
• Do not use different battery types or a
mixture of new and old batteries at the
same time.
• Do not short circuit the batteries.
• Remove the batteries if the device is not
used for a long time. Leaking batteries
could damage the device.
4.8 Material damage
Caution! To avoid material damage,
please observe the following conditions.
• Remove the batteries from the remote
control if you are not using it for a
prolonged period of time. Leaking
batteries could damage the remote
control.
• Ensure that the feet are fitted correctly
(see “5.2 Setting up the appliance” on
page 6), otherwise the floor might be
scratched or scorched.
5. Unpacking, setting up and inserting the batteries
5.1 Mounting the appliance
Before the appliance can be used, the feet 7
must be screwed on as follows:
1. Unpack the appliance from the
packaging.
2. Remove the transport packaging.
3. Check that the appliance shows no signs
of damage.
4. Slide the feet 7from the outside into the
corresponding supports on the
underside of the convector.
5. Secure the feet 7firmly using the screws
supplied.
5.2 Setting up the appliance
Note: As the appliance and heating
elements are supplied with a thin film of
grease, there might be a small amount of
smoke and odour the first time the appliance
is used. This is not harmful and will stop after
a short while. Please ensure meanwhile that
there is sufficient ventilation.
Warning! Ensure that there is
sufficient distance from the wall,
fixtures and other appliances. The
distance must be at least 1 m to
exclude the risk of fire.
RP90866 Konvektor LB7 Seite 6 Montag, 22. Juli 2013 3:23 15

SKD2300A1 7
1. Select a location in compliance with the
safety information (see “4. Safety
information” on page 3).
2. Plug the mains plug into a wall socket
that complies with the technical data.
Note:If you have plugged other power
consumers into the same circuit, check
that the maximum load for the installed
fuse is not exceeded, as otherwise the
fuse will trip.
5.3 Inserting the batteries
If the appliance is new or the batteries in the
remote control are flat, new type AAA/
LR03 batteries must be inserted.
1. Push off the battery compartment cover
on the underside of the remote control.
2. Remove the old batteries if present.
Note: Please observe the instructions
for disposal (see “9.2 Disposable/
rechargeable batteries” on page 10).
3. Insert new batteries.
Note: Ensure the correct polarity (+/
–). The correct polarity is shown on the
bottom of the battery compartment.
4. Close the battery compartment again.
6. Operating
6.1 Using the appliance for the first time
1. Plug the mains plug into a wall socket
that complies with the technical data
(see “3. Technical data” on page 3).
2. Switch the mains switch 9to "I" to
switch on the power supply.
The lamp in the main switch 9lights up
and you hear a beep.
3. Press the On/Off button 22 to switch
the appliance on.
The display 5lights up.
The appliance is now ready for use and can
be operated by means of the remote control
or control panel 2.
6.2 Selecting the temperature
Notes:
• Temperature display 20:
– set specified temperature
• Temperature display 21:
– measured actual temperature
• Temperature is measured directly at the
appliance using temperature sensor 8. It
may be some time before the entire
room has also reached this temperature.
1. To choose whether you wish the
temperature to be displayed in °C or °F,
press button 24.
Selected unit of measurement 14 is
shown in the display 5.
2. Press the “Increase temperature”
button 16 to increase the desired
temperature up to a maximum of 37 °C
(99 °F).
Selected specified temperature 20 is
shown in display 5.
RP90866 Konvektor LB7 Seite 7 Montag, 22. Juli 2013 3:23 15

8
3. Press the “Reduce temperature”
button 17 to lower the desired
temperature to a minimum of 5 °C
(41 °F).
Selected specified temperature 20 is
shown in display 5.
6.3 Setting the heat setting
The appliance has three heat settings:
– 1,000 watts
– 1,300 watts
– 2,300 watts
1. Press button 25 repeatedly until the
desired heat setting is set.
Selected heating level 11 is shown in
display 5.
2. Press the fan button 15 to switch the fan
on or off.
If the fan is switched on, "Fan"
symbol 12 is shown in display 5.
Note: The fan might make a slight
noise, but it does ensure better
circulation of the heated air.
6.4 Setting the heating time
The appliance has a timer for setting the
heating time to between 1 and 15 hours.
The appliance switches off automatically
once the heating time has expired.
1. Press timer button 18 repeatedly until
desired running time 19 is shown in
display 5.
2. To switch off the timer, press timer
button 18 repeatedly until running
time 19 is no longer displayed.
6.5 Thermal cut-out
For your safety the appliance has a thermal
cut-out.
If the temperature inside the appliance
becomes too high, the appliance switches
off automatically:
1. Switch the mains switch 9to "0" to
switch off the appliance.
2. Check whether the air inlet 6or outlet 4
is obstructed and remove the cause.
If you cannot establish a cause and the
fault occurs repeatedly, have the
appliance repaired or else take it out of
use.
3. Wait for the appliance to cool down.
4. You can then continue to operate it
normally.
6.6 Frost protection
To prevent the temperature in a room falling
below 0 °C (32 °F), proceed as follows:
1. Press the button for selecting heating
level 25 repeatedly until "Frost
protection" symbol 13 appears in
display 5.
As soon as the temperature in the immediate
vicinity of the appliance drops significantly
below 7°C (44°F), the heating
automatically switches on.
As soon as the temperature rises to above
9 °C (48 °F), the heating switches off and
display 5shows room temperature again.
2. To switch off frost protection, press the
button for selecting heating level 25
repeatedly until "Frost protection"
symbol 13 in display 5disappears.
RP90866 Konvektor LB7 Seite 8 Montag, 22. Juli 2013 3:23 15