Silvercrest 366378 2101 User manual

IAN 366378_2101
MINCER / FLEISCHWOLF / HACHOIR À VIANDE
SFW 350 D5
HACHOIR À VIANDE
Mode d’emploi
MINCER
Operating instructions
VLEESMOLEN
Gebruiksaanwijzing
MLÝNEK NA MASO
Návod k obsluze
KØDHAKKER
Betjeningsvejledning
MLYNČEK NA MÄSO
Návod na obsluhu
FLEISCHWOLF
Bedienungsanleitung
MASZYNKA DO MIELENIA MIĘSA
Instrukcja obsługi
PICADORA DE CARNE
Instrucciones de uso

GB / IE Operating instructions Page 1
DE / AT / CH Bedienungsanleitung Seite 21
FR / BE Mode d’emploi Page 41
NL / BE Gebruiksaanwijzing Pagina 65
CZ Návod k obsluze Strana 85
PL Instrukcja obsługi Strona 105
SK Návod na obsluhu Strana 125
ES Instrucciones de uso Página 145
DK Betjeningsvejledning Side 165
Before reading, unfold the page containing the illustrations and familiarise yourself with all functions of the
device.
Klappen Sie vor dem Lesen die Seite mit den Abbildungen aus und machen Sie sich anschließend mit
allen Funktionen des Gerätes vertraut.
Avant de lire le mode d‘emploi, ouvrez la page contenant les illustrations et familiarisez-vous ensuite avec
toutes les fonctions de l‘appareil.
Vouw vóór het lezen de pagina met de afbeeldingen open en maak u vertrouwd met alle functies van het
apparaat.
Před čtením si otevřete stranu s obrázky a potom se seznamte se všemi funkcemi přístroje.
Przed przeczytaniem proszę rozłożyć stronę z ilustracjami, a następnie proszę zapoznać się z wszystkimi
funkcjami urządzenia.
Pred čítaním si odklopte stranu s obrázkami a potom sa oboznámte so všetkými funkciami prístroja.
Antes de empezar a leer abra la página que contiene las imágenes y, en seguida, familiarícese con todas
las funciones del dispositivo.
Før du læser, vend siden med billeder frem og bliv bekendt med alle apparatets funktioner.

A
B
0 9 7 6
5
8
w
q
e
1
2
3
C
t
u
i
z
r
4

GB│IE │ 1 ■SFW 350 D5
Index
Introduction...................................................2
Copyright .............................................................. 2
Limited liability ........................................................... 2
Intended use ..................................................2
Items supplied/Component description ............................3
Technical data .................................................3
Safety instructions .............................................4
Assembly/Disassembly .........................................6
Assembling the meat grinder ................................................ 6
Assembling the sausage stuffer attachment .................................... 7
Assembling the kubbe attachment............................................ 8
Assembling the biscuit attachments ........................................... 8
Operation ....................................................9
Operating the appliance ................................................... 9
Processing meat.........................................................10
Processing sausage meat.................................................. 10
Using the kubbe attachment ...............................................11
Making biscuits .........................................................11
Non-functionality .............................................12
Cleaning.....................................................12
Cleaning the motor block .................................................13
Cleaning the accessories.................................................. 13
Storage .....................................................14
Disposal .....................................................15
Kompernass Handels GmbH warranty............................16
Service................................................................ 17
Importer ............................................................... 17
Recipes......................................................18
Kibbeh ................................................................18
Meat rolls..............................................................19
Fresh Grill Sausages .....................................................20
Biscuits ................................................................20

■ 2 │ GB│IE SFW 350 D5
Introduction
Congratulations on the purchase of your new appliance.
You have clearly decided in favour of a quality product. These operating instructions
are a part of this product. They contain important information in regard to safety,
use and disposal. Before using the product, familiarise yourself with all of these
operating and safety instructions. Use the product only as described and only for
the specified areas of application. Retain these instructions for future reference. In
addition, pass these documents on, together with the product, to any future owner.
Copyright
This documentation is copyright protected.
Any copying or reproduction of it, including as extracts, as well as the reproduction
of images, also in an altered state, is only permitted with the written authorisation
of the manufacturer.
Limited liability
All technical information, data and instructions for the installation, connection
and operation contained in these operating instructions correspond to the latest
available at the time of printing and, to the best of our knowledge, take into
account our previous experience and know-how.
No claims can be derived from the details, illustrations and descriptions in these
instructions.
The manufacturer assumes no responsibility for damage caused by failure to
observe these instructions, improper use, incompetent repairs, making
unauthorised modifications or for using unapproved replacement parts.
Intended use
This appliance is intended only for the preparation of food in quantities expected
in domestic households:
▯ Mincing fresh meat,
▯ Making sausages with natural or artificial sausage skin,
▯ Making biscuits
This appliance is not intended for the processing of frozen foods or other hard
foodstuffs, e.g. bones or nuts, or for use in commercial or industrial environments.

GB│IE │ 3 ■SFW 350 D5
Items supplied/Component description
Figure A:
1Biscuit attachment with pattern strips
2Stodger
3Feeding tray
4Cable retainer
5Motor unit
6Meat grinder casing made of metal
7Transport screw
8Spring
9Cross blade
0Cutting discs for coarse and fine mincing
qRing clamp
wSausage stuffer attachment
eSausage disc
rKubbe attachment
Figure B:
tLocking button
Figure C:
z“I” button (On)
u“0” button (Off)
i“<” button (Reverse)
Technical data
Voltage 220–240 V ∼ (AC), 50Hz
Power consumption 250–350 W
Blocking power 1200 W
Protection class II / (Double insulation)
All of the parts of this appliance that come into
contact with food are food-safe.
C.O. Time 15 minutes
C.O. Time
The C.O. Time (Continuous Operation) details how long an appliance may be
used without the motor overheating and being damaged. After the appliance has
run for this period it must be switched off until the motor has cooled itself down.

■ 4 │ GB│IE SFW 350 D5
Safety instructions
RISK OF ELECTRIC SHOCK
► Ensure that the power cable does not become damaged.
Protect the cable from heat and ensure that it cannot be
trapped or clamped.
► To avoid potential risks, if the appliance power cable is
damaged, it must be replaced by the manufacturer, its
customer service or by a qualified technician.
► Use the appliance only in dry indoor areas, not outdoors.
Never immerse the motor block in water or any other
liquid! If you do, then you could receive a potentially
fatal electric shock.
WARNING!
► Never use the appliance for purposes other than those
listed here. There will be a major risk of serious accidents
should you try to neutralise the safety fitments on the
appliance!
WARNING! RISK OF INJURY!
► Never put your hand into the openings of the appliance.
Do not insert any objects of any kind into the openings –
except for the appropriate stodger and the foodstuff to be
processed. If you do, there will be a serious risk of accidents!
► Unplug the appliance from the power source before
attaching or removing accessories.
► Do not leave the appliance unsupervised when it is ready
for use. To avoid it being switched on accidentally, always
unplug the appliance after use or during breaks.

GB│IE │ 5 ■SFW 350 D5
WARNING! RISK OF INJURY!
► Only use the original accessory parts for this appliance.
Other accessories may not meet the safety requirements.
► Never operate the appliance in a no-load condition. This
could irreparably damage the appliance.
► Before changing accessories or additional parts that are
in motion during operation, the appliance must be
switched off and disconnected from mains power.
► Never use the appliance for purposes other than those
described in these instructions.
► Warning – the cross blade is very sharp! Always take care
when handling and cleaning the appliance.
► The appliance should always be disconnected from the
mains when unattended and before assembly, disassembly
or cleaning.
► This appliance may not be used by children.
► The appliance and its connecting cable must be kept away
from children.
► This appliance may be used by persons with limited
physical, sensory or mental capabilities or lack of
experience and knowledge, provided that they are under
supervision or have been told how to use the appliance
safely and are aware of the potential risks.
► The appliance must not be used as a plaything by children.

■ 6 │ GB│IE SFW 350 D5
Assembly/Disassembly
CAUTION! PROPERTY DAMAGE!
► All accessories are coated with a thin film of oil to protect them from
corrosion. Therefore, carefully clean all of the parts before using the
appliance for the first time, as described in detail in the chapter "Cleaning".
After subsequent usage, always apply a light coating of cooking oil to the
metallic components.
NOTICE
► Before using for the first time, remove the protective foil from the control panel.
Assembling the meat grinder
Unfold the fold-out side. There you will find the step-by-step illustrations for
assembling the appliance.
1) Coat all metal parts with cooking oil.
2) Place the transport screw 7in the meat grinder casing 6.
3) Place the spring 8onto the transport screw 7.
4) Then fit the cross blade 9on so that the sharp side points away from the
spring 8. Ensure that the square opening in the cross blade 9is placed
correctly on the square axle.
WARNING! RISK OF INJURY!
► The cross blade 9is very sharp! Risk of injury!
CAUTION! PROPERTY DAMAGE!
► The appliance will be damaged if the cross blade 9is inserted the other
way around!
5) Select the appropriate cutting disc 0/sausage disc e.

GB│IE │ 7 ■SFW 350 D5
6) Place your selected cutting disc 0into the meat grinder casing 6so that
the fixings on the cutting disc 0 are located in the openings in the meat
grinder casing 6.
7) After everything has been correctly assembled, screw the ring clamp q
back on hand-tight.
8) The ready-assembled meat grinder casing 6is connected by a bayonet
connector to the motor unit 5:
– Insert the meat grinder casing 6into the motor unit 5such that the
arrow on the meat grinder casing 6 lies against the symbol on the
motor unit 5. The locking button t presses itself in (Fig. B).
– Lightly press the meat grinder casing 6in and at the same time turn
the feeding shaft on the meat grinder casing 6into the middle position
(Fig. B) so that the arrow on the feeding shaft points to the symbol .
When the meat grinder casing 6engages, the locking button t
springs out.
– Finally, place the feeding tray 3on top of the feeding funnel.
– To dismantle it, press the locking button t and turn the feeding funnel to
the right (Fig. B) . You can now pull the meat grinder casing 6out.
Assembling the sausage stuffer attachment
Unfold the fold-out side - there you will find the step-by-step illustrations for
assembling the appliance.
1) Remove the meat grinder casing 6as described under “Assembling the
meat grinder”.
2) Dismantle all parts which are fitted to/in the meat grinder casing 6and
clean them.
3) Coat all metal parts with cooking oil.
4) Put the transport screw 7, the spring 8and the cross blade 9back into
the meat grinder casing 6.
5) Insert the sausage disc eso that the fixings on the sausage disc eare
located in the openings in the meat grinder casing 6.
6) Then place the sausage stuffer attachment wbefore the sausage disc e.
7) Screw the ring clamp qon hand-tight.
8) Assemble the meat grinder casing 6as described under “Assembling the
meat grinder”.