Silvercrest SFW 350 C1 User manual

IAN 279085
MINCER SFW 350 C1
MINCER
Operating instructions KÖTTKVARN
Bruksanvisning
FLEISCHWOLF
Bedienungsanleitung
MĖSMALĖ
Naudojimo instrukcija
MASZYNKA DO MIELENIA MIĘSA
Instrukcja obsługi

GB Operating instructions Page 1
SE Bruksanvisning Sidan 19
PL Instrukcja obsługi Strona 37
LT Naudojimo instrukcija Puslapis 55
DE/AT/CH Bedienungsanleitung Seite 73
Before reading, unfold the page containing the illustrations and familiarise yourself with all functions of
the device.
Vik ut bildsidan och ha den till hands när du läser igenom anvisningarna och gör dig bekant med
apparatens/maskinens funktioner.
Przed przeczytaniem proszę rozłożyć stronę z ilustracjami, a następnie proszę zapoznać się z wszystkimi
funkcjami urządzenia.
Prieš skaitydami atsiverskite lapą su paveikslėliais ir susipažinkite su visomis prietaiso funkcijomis.
Klappen Sie vor dem Lesen die Seite mit den Abbildungen aus und machen Sie sich anschließend mit allen
Funktionen des Gerätes vertraut.

A
B


3
-
!




C0
1
6
.

GB │ 1 ■
SFW 350 C1
Index
Introduction...................................................2
Copyright .............................................................. 2
Limited liability ........................................................... 2
Intended use ..................................................2
Items supplied/ Component description............................3
Technical data .................................................3
Safety instructions .............................................4
Assembly /Disassembly.........................................6
Assembling the meat grinder ................................................ 6
Assembling the sausage stuffer attachment .................................... 7
Assembling the kubbe attachment............................................ 8
Assembling the biscuit attachments ........................................... 8
Operation ....................................................9
Operating the appliance ................................................... 9
Processing meat.........................................................10
Processing sausage meat.................................................. 10
Using the kubbe attachment ...............................................11
Making biscuits ......................................................... 11
Non-functionality .............................................12
Cleaning.....................................................12
Cleaning the motor block .................................................12
Cleaning the accessories..................................................13
Storage .....................................................13
Disposal .....................................................14
Kompernass Handels GmbH warranty............................14
Service................................................................15
Importer ...............................................................15
Recipes......................................................16
Kubbe ................................................................ 16
Fresh Grill Sausages .....................................................17
Biscuits ................................................................17

■ 2 │ GB SFW 350 C1
Introduction
Congratulations on the purchase of your new appliance.
You have clearly decided in favour of a quality product. These operating instructions
are a part of this product. They contain important information in regard to safety,
use and disposal. Before using the product, familiarise yourself with all of these
operating and safety instructions. Use the product only as described and only for
the specified areas of application. Retain these instructions for future reference. In
addition, pass these documents on, together with the product, to any future owner.
Copyright
This documentation is copyright protected.
Any copying or reproduction of it, including as extracts, as well as the reproduction
of images, also in an altered state, is only permitted with the written authorisation
of the manufacturer.
Limited liability
All technical information, data and instructions for the installation, connection
and operation contained in these operating instructions correspond to the latest
available at the time of printing and, to the best of our knowledge, take into
account our previous experience and know-how.
No claims can be derived from the details, illustrations and descriptions in these
instructions.
The manufacturer assumes no responsibility for damage caused by failure to ob-
serve these instructions, improper use, incompetent repairs, making unauthorised
modifications or for using unapproved replacement parts.
Intended use
This appliance is intended only for the preparation of food in quantities expected
in domestic households:
▯ Mincing fresh meat,
▯ Making sausages with natural or artificial sausage skin,
▯ Making biscuits
This appliance is not intended for the processing of frozen foods or other hard
foodstuffs, e.g. bones or nuts, or for use in commercial or industrial environments.

GB │ 3 ■
SFW 350 C1
Items supplied/ Component description
Figure A:
Biscuit attachment with pattern strips
Stodger
Feeding tray
Motor unit
Meat grinder casing made of metal
Transport screw
Spring
Cross blade
Cutting discs for coarse and fine mincing
Ring clamp
-Sausage stuffer attachment
3Sausage disc
!Kubbe attachment
Figure B:
.Locking button
Figure C:
0“I” button (On)
6“0” button (Off)
1“<” button (Reverse)
Technical data
Voltage 220 - 240 V ∼, 50Hz
Power consumption 250 - 350 W
Protection class II /
All of the parts of this appliance
that come into contact with food
are food-safe.
C.O. Time 15 minutes
C.O. Time
The C.O. Time (Continuous Operation) details how long an appliance may be
used without the motor overheating and being damaged. After the appliance has
run for this period it must be switched off until the motor has cooled itself down.

■ 4 │ GB SFW 350 C1
Safety instructions
RISK OF ELECTRIC SHOCK
► Ensure that the power cable does not become damaged. Pro-
tect the cable from heat and ensure that it cannot be trapped
or clamped.
► Arrange for damaged power cables and/or plugs to be
replaced as soon as possible by a qualified specialist or by
Customer Services.
► Use the appliance only in dry indoor areas, not outdoors.
Never immerse the motor block in water or any other
liquid! If you do, then you could receive a potentially
fatal electric shock.
WARNING!
► Never use the appliance for purposes other than those listed
here. There will be a major risk of serious accidents should
you try to neutralise the safety fitments on the appliance!
WARNING! RISK OF INJURY!
► Never put your hand into the openings of the appliance. Do
not insert any objects of any kind into the openings – except
for the appropriate stodger and the foodstuff to be processed.
If you do, there will be a serious risk of accidents!
► Unplug the appliance from the power source before attaching
or removing accessories.
► Do not leave the appliance unsupervised when it is ready
for use. To avoid it being switched on accidentally, always
unplug the appliance after use or during breaks.
► Only use the original accessory parts for this appliance.
Other accessories may not meet the safety requirements.

GB │ 5 ■
SFW 350 C1
WARNING! RISK OF INJURY!
► Never operate the appliance in a no-load condition. This
could irreparably damage the appliance.
► Before changing accessories or additional parts that are in
motion during operation, the appliance must be switched off
and disconnected from mains power.
► Never use the appliance for purposes other than those
described in these instructions.
► Warning – the cross blade is very sharp! Always take care
when handling and cleaning the appliance.
► The appliance should always be disconnected from the
mains when unattended and before assembly, disassembly
or cleaning.
► This appliance may not be used by children.
► The appliance and its connecting cable must be kept away
from children.
► This appliance may be used by persons with limited physical,
sensory or mental capabilities or lack of experience and
knowledge, provided that they are under supervision or
have been told how to use the appliance safely and are
aware of the potential risks.
► The appliance must not be used as a plaything by children.

■ 6 │ GB SFW 350 C1
Assembly /Disassembly
CAUTION - PROPERTY DAMAGE!
► All accessories are coated with a thin film of oil to protect them from corrosion.
Therefore, carefully clean all of the parts before using the appliance for the
first time, as described in detail in the chapter "Cleaning". After subsequent
usage, always apply a light coating of cooking oil to the metallic components.
NOTICE
► Before using for the first time, remove the protective foil from the control panel.
Assembling the meat grinder
Unfold the fold-out side. There you will find the step-by-step illustrations for as-
sembling the appliance.
1) Place the transport screw in the meat grinder casing .
2) Place the spring onto the transport screw .
3) Then fit the cross blade on so that the sharp side points away from the
spring . Ensure that the square opening in the cross blade is placed
correctly on the square axle.
WARNING! RISK OF INJURY!
► The cross blade is very sharp! Risk of injury!
CAUTION - PROPERTY DAMAGE!
► The appliance will be damaged if the cross blade is inserted the other
way around!
4) Select the appropriate cutting disc /sausage disc 3.

GB │ 7 ■
SFW 350 C1
5) Place your selected cutting disc into the meat grinder casing so that
the fixings on the cutting disc are located in the openings in the meat
grinder casing .
6) After everything has been correctly assembled, screw the ring clamp 
back on hand-tight.
7) The ready-assembled meat grinder casing is connected by a bayonet
connector to the motor unit :
– Insert the meat grinder casing into the motor unit such that the
arrow on the meat grinder casing lies against the symbol on the
motor unit . The locking button .presses itself in (Fig. B).
– Lightly press the meat grinder casing in and at the same time turn
the feeding shaft on the meat grinder casing into the middle position
(Fig. B) so that the arrow on the feeding shaft points to the symbol .
When the meat grinder casing engages, the locking button .
springs out.
– Finally, place the feeding tray on top of the feeding funnel.
– To dismantle it, press the locking button .and turn the feeding funnel
to the right (Fig. B) . You can now pull the meat grinder casing out.
Assembling the sausage stuffer attachment
Unfold the fold-out side - there you will find the step-by-step illustrations for as-
sembling the appliance.
1) Remove the meat grinder casing as described under “Assembling the
meat grinder”.
2) Dismantle all parts which are fitted to/in the meat grinder casing and
clean them.
3) Coat all metal parts with cooking oil.
4) Put the transport screw , the spring and the cross blade back into
the meat grinder casing .
5) Insert the sausage disc 3so that the fixings on the sausage disc 3are
located in the openings in the meat grinder casing .
6) Then place the sausage stuffer attachment -before the sausage disc 3.
7) Screw the ring clamp on hand-tight.
8) Assemble the meat grinder casing as described under “Assembling the
meat grinder”.