Silvercrest SGP 28 A1 User manual

IAN 100631
ELECTRIC PASTRY PRESS SGP 28 A1
ELECTRIC PASTRY PRESS
Operating instructions
ELEKTRISCHE GEBÄCKPRESSE
Bedienungsanleitung
ELEKTRIČNA TLAČILKA ZA PECIVO
Navodila za uporabo
CV_100631_SGP28A1_LB4.indd 2CV_100631_SGP28A1_LB4.indd 2 25.07.14 08:1225.07.14 08:12

GB Operating instructions Page 1
SI Navodila za uporabo Stran 19
DE/AT / CH Bedienungsanleitung Seite 37
Before reading, unfold the page containing the illustrations and familiarise yourself with all functions of
the device.
Pred branjem odprite stran s slikami in se nato seznanite z vsemi funkcijami naprave.
Klappen Sie vor dem Lesen die Seite mit den Abbildungen aus und machen Sie sich anschließend mit allen
Funktionen des Gerätes vertraut.
CV_100631_SGP28A1_LB4.indd 3CV_100631_SGP28A1_LB4.indd 3 25.07.14 08:1225.07.14 08:12

B
A
CV_100631_SGP28A1_LB4.indd 4CV_100631_SGP28A1_LB4.indd 4 25.07.14 08:1225.07.14 08:12

1
SGP 28 A1
GB
Contents
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
Information concerning these operating instructions . . . . . . . . . . . . . . . . . . . . . . . .2
Copyright . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
Intended use. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
Warnings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
Safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
Basic safety guidelines . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
Controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
Unpacking and assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
Safety guidelines . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
Package contents and transport inspection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
Unpacking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
Disposal of packaging materials . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
Before first use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
Assembling/dismantling the appliance . . . . . . . . . . . . . . . . . . . . . . .8
Using the appliance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Filling the container . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Shaping biscuits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Adding decorations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Refilling with dough or decoration substance. . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Tips . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Cleaning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Storage/disposal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Storage. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Disposal of the appliance. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Appendix . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Notes on the Declaration of Conformity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Technical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Importer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Recipes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Spritzgebäck cookies 1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Spritzgebäck cookies 2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
IB_100631_SGP28A1_LB4.indb 1IB_100631_SGP28A1_LB4.indb 1 25.07.14 08:0825.07.14 08:08

2SGP 28 A1
GB Introduction
Information concerning these operating instructions
Congratulations on the purchase of your new appliance.
You have selected a high-quality product. The operating instructions are part of
this product. They contain important information on safety, usage and disposal.
Before using the product, familiarise yourself with all handling and safety guide-
lines. Use the product only as described and for the range of applications speci-
fied. Please also pass these operating instructions on to any future owner(s).
Copyright
This documentation is subject to copyright protection.
Any copying or reproduction, including in the form of extracts, or any reproduc-
tion of images (even in a modified state), is permitted only with the written
authorisation of the manufacturer.
Intended use
This appliance is designed for the shaping of pastries and for the decorating
of cakes or similar. It is not intended for any other use. This appliance is not
intended for use in commercial or industrial environments.
The manufacturer accepts no responsibility for damage caused by failure to
observe these instructions, improper use or repairs, unauthorised modifications
or the use of unapproved replacement parts. The operator bears sole liability.
Warnings
The following warnings are used in these operating instructions:
DANGER
A warning at this hazard level indicates an imminently
hazardous situation.
If the hazardous situation is not avoided, it could result in death or serious
physical injury.
► Follow the instructions in this warning to prevent a fatality or serious per-
sonal injury.
IB_100631_SGP28A1_LB4.indb 2IB_100631_SGP28A1_LB4.indb 2 25.07.14 08:0825.07.14 08:08

3
SGP 28 A1
GB
WARNING
A warning at this hazard level indicates a potentially hazard-
ous situation.
Failure to avoid this hazardous situation could result in physical injury.
► Follow the instructions in this warning to prevent physical injury.
CAUTION
A warning at this hazard level indicates potential material
damage.
Failure to avoid this situation could result in material damage.
► Follow the instructions in this warning to prevent material damage.
NOTE
► A note indicates additional information that will assist you in using the
appliance.
Safety
In this section, you will receive important safety advice relating to using the ap-
pliance.
The appliance complies with the statutory safety regulations. Improper use may
result in personal injury and material damage.
Basic safety guidelines
■ Prior to use, check the appliance for visible external dam-
age. Do not operate an appliance that has been damaged
or dropped.
■ To avoid potential risks, if the appliance power cable is
damaged, it must be replaced by the manufacturer, its
customer service or by a qualified technician.
■ All repairs must be carried out by authorised special-
ist companies or by the Customer Service department.
Failure to make proper repairs can put the user at risk.
Warranty entitlement will also lapse.
IB_100631_SGP28A1_LB4.indb 3IB_100631_SGP28A1_LB4.indb 3 25.07.14 08:0825.07.14 08:08

4SGP 28 A1
GB
■ This appliance may be used by people with reduced physical,
sensory or mental capabilities or lack of experience and/or know-
ledge if they are supervised and have been instructed in how to use
the appliance safely and have understood the potential risks.
■ Children must not use the appliance as a plaything.
■ The appliance should always be disconnected from the mains when
unattended and before assembly, disassembly or cleaning.
■ Before changing any accessories or additional parts that move
during operation, the appliance must be switched off and discon-
nected from mains power.
■ This appliance may be used by children aged 8 years or over if they
are supervised or have been told how to use the appliance safely
and are aware of the potential risks.
■ Cleaning and user maintenance tasks must not be carried out by
children unless they are aged 8 years or more and are supervised.
■ The appliance and its connecting cable must be kept away from
children younger than 8 years old.
■ Children should be supervised to ensure that they do not play with
the appliance.
■ Repairs to the appliance during the warranty period may only be
carried out by a customer service department authorised by the
manufacturer. Otherwise no additional warranty claims can be
considered for subsequent damage.
■ Defective components must always be replaced with original re-
placement parts. Compliance with safety requirements can only be
guaranteed if original replacement parts are used.
■ Do not operate or place the appliance close to an open flame
(e.g. candles).
IB_100631_SGP28A1_LB4.indb 4IB_100631_SGP28A1_LB4.indb 4 25.07.14 08:0825.07.14 08:08

5
SGP 28 A1
GB
RISK OF ELECTRIC SHOCK!
► The appliance should only be connected to correctly installed and
earthed mains power sockets. Ensure that the rating for your local
power supply corresponds with the details on the rating plate of
the appliance.
► Arrange for Customer Services to repair or replace connecting ca-
bles and/or appliances that are not functioning properly or have
been damaged.
► Keep the power cord and appliance away from children. Chil-
dren frequently underestimate the dangers of electrical appli-
ances.
► Never submerse the motor unit in water. Wipe it only with a
slightly damp cloth.
► Do not expose the appliance to rain, and never use it in a humid
or wet environment.
► Always take hold of the plug when handling the power cable. Do
not pull on the cable itself and never touch the power cable with
wet hands, this could result in either a short circuit or an electric
shock.
► Do not place the appliance itself, furniture items or similar objects
on the power cable, and take steps to ensure it cannot become
jammed or trapped in any way.
► Take steps to ensure the power cable never becomes wet or moist
during use.
► You are not permitted to open the appliance housing or to repair or
modify the appliance. If the housing is opened or improper modi-
fications are made, you run the risk of receiving a potentially fatal
electric shock and the warranty will be void.
► Protect the appliance from drips or splashes of water. Do not place
any water-filled vessels (e.g. flower vases) on or near the appli-
ance.
► Always pull out the plug from the wall socket after every use and
before each cleaning.
IB_100631_SGP28A1_LB4.indb 5IB_100631_SGP28A1_LB4.indb 5 25.07.14 08:0825.07.14 08:08

6SGP 28 A1
GB Controls
Figure A:
1 Start button
2 Handle
3 Power cable with mains plug
4 Motor unit
5Threaded rod
6Pusher
7Container
8Nozzle adapter
9Nozzle
0Adapter lock
qLocking ring
wPattern disc
Figure B:
Pattern discs and nozzles
Unpacking and assembly
Safety guidelines
WARNING
During the first use of the appliance there is a risk of injury
and/or damage to property!
To avoid risks, observe the following safety instructions:
► Packaging material may not be used as a plaything.
Risk of suffocation.
► Please follow the instructions regarding the electrical connection of the
appliance to avoid damage to property.
IB_100631_SGP28A1_LB4.indb 6IB_100631_SGP28A1_LB4.indb 6 25.07.14 08:0825.07.14 08:08

7
SGP 28 A1
GB
Package contents and transport inspection
This appliance is supplied with the following components as standard
(see fold-out page):
● Electric Pastry Press SGP 28 A1
● 12 pattern discs w
● 3 nozzles with adapter 9/8
● Operating instructions
NOTE
► Check the consignment for completeness and for signs of visible damage.
► If the consignment is incomplete or damaged due to defective packaging
or carriage, contact the Service hotline (see the chapter Service).
Unpacking
♦ Remove all parts of the appliance and the operating instructions from the
box.
♦ Remove all packaging material.
Disposal of packaging materials
The packaging protects the appliance from damage during shipment. The pack-
aging materials have been selected for their environmental friendliness and ease
of disposal, and are therefore recyclable.
Returning the packaging to the materials cycle conserves raw materials and
reduces the amount of waste that is generated. Dispose of packaging materials
which are no longer needed in accordance with applicable local regulations.
NOTE
► If possible, keep the original packaging of the appliance during the war-
ranty period so that the appliance can be packed properly for returning in
the event of a warranty claim.
IB_100631_SGP28A1_LB4.indb 7IB_100631_SGP28A1_LB4.indb 7 25.07.14 08:0825.07.14 08:08

8SGP 28 A1
GB Before first use
♦ Clean all accessories as described in the chapter "Cleaning" to remove any
possible production residues.
Assembling/dismantling the appliance
DANGER
Remove the plug of the power cord 3from the mains socket before assembling
the appliance components.
♦ Flip the handle 290° from the motor unit 4until it clicks into place.
Inserting the threaded rod with pusher
1) Place the end of the threaded rod 5into the motor unit 4. Ensure that
the pins on the inside of the motor unit 4grip into the guide rail of the
threaded rod 5.
2) Push the threaded rod 5with the pusher 6as far as it will go into the
motor unit 4.
Attaching/removing the container
NOTE
The container 7must be attached otherwise the biscuit shaper will not function!
1) Push the container 7over the pusher 6such that the guide rails inside
the container 7engage in the in notches on the pusher 6.
2) Place the container 7on the motor unit 4so that the arrow on the con-
tainer 7points to the marking on the motor unit 4.
3) Turn the container 7until this arrow points to the marking on the motor
unit 4.
To remove the container 7, turn it until the arrow on the container 7points
to the mark on the motor unit 4. Now you can remove the container 7.
IB_100631_SGP28A1_LB4.indb 8IB_100631_SGP28A1_LB4.indb 8 25.07.14 08:0825.07.14 08:08

9
SGP 28 A1
GB
Fitting/removing the pattern discs
NOTE
You can use the pattern discs wto form the dough into different shapes which
can then be baked into cookies with varying appearances.
When the pusher 6and container 7are assembled:
1) Select the desired pattern disc w.
2) Place the pattern disc winto the locking ring qso that the smooth, un-
labelled side of the pattern disc is facing outward.
3) Place the locking ring qwith the pattern disc wonto the container 7.
4) Hold the container 7firmly and turn the locking ring quntil it is firmly
seated.
To remove the pattern disc, unscrew the locking ring qand remove it and the
pattern disc wfrom the container.
Fitting/removing the nozzles
NOTE
You can use the nozzles 9to shape the decoration substance into various
forms.
When the pusher 6and container 7are assembled:
1) Place the nozzle adapter 8into the locking ring q. The thread must be
facing outwards.
2) Place the locking ring qwith the nozzle adaptor 8onto the container 7.
3) Hold the container 7firmly and turn the locking ring qclockwise until it is
firmly seated.
4) Select a nozzle 9.
5) Place the nozzle 9onto the nozzle adapter 8.
6) Screw the adapter lock 0over the nozzle 9on the nozzle adapter 8.
To remove the nozzle 9, unscrew the adapter lock 0and remove it and the
nozzle 9from the container. Unscrew the locking ring qand remove this and
the nozzle adapter 8from the container.
IB_100631_SGP28A1_LB4.indb 9IB_100631_SGP28A1_LB4.indb 9 25.07.14 08:0825.07.14 08:08

10 SGP 28 A1
GB Using the appliance
Filling the container
The dough must be at room temperature so that it has the right consistency.
If it is too soft, place it in the refrigerator for a short time.
1) Turn the container 7, so that the arrow on the container 7points to the
marking on the motor unit 4.
2) Remove the container 7from the motor unit 4. Leave the threaded rod 5
with the pusher 6in the motor unit 4.
TIP
If required, moisten the inner surface of the container 7with water before
filling it with dough. This helps to prevent the dough from sticking to the inner
surfaces of the container 7.
3) To ease filling of the container 7, form the dough or the decoration sub-
stance into a roll. Fill the container 7with this roll.
NOTE
If you fill the container with cream or any other foamy decoration substance,
ensure that no large air pockets form in the container. Otherwise, the decora-
tion cannot be applied evenly. If required, push the mass carefully together
using the pusher 6during filling as soon as any air pocket has formed. While
doing this, close the nozzle 9with a finger so that the mass is not pressed out
of the container 7.
NOTE
Fill the container 7at the most to the MAX marking . Process the pastry
straight away.
IB_100631_SGP28A1_LB4.indb 10IB_100631_SGP28A1_LB4.indb 10 25.07.14 08:0825.07.14 08:08

11
SGP 28 A1
GB
4) Place the container 7onto the motor unit 4as described in the chapter
"Attaching the container". Ensure that the pusher does not fall out of the
motor unit and that none of the mass/dough escapes from the container.
LOCK
5) Insert the plug into a mains power socket.
You can now form pastries/add decorations.
Shaping biscuits
NOTES
Use only the pattern discs wfor shaping biscuits.
Do not line the baking tray with Teflon, fats or oil paper, as the biscuits then do
not keep their shape.
Ensure that the locking ring qsits firmly on the container 7and that the
container 7is correctly mounted on the motor unit 4before you switch the
appliance on.
1) Hold the biscuit shaper a little way above the baking tray.
2) Press on the start button 1until the first biscuit has been formed. The length
of time you need to press the start button 1is dependent on the desired
shape and size of the biscuit. If you press the start button 1for just a short
time, you will form a small biscuit. The longer you press the start button 1,
the larger the biscuit will be.
3) Release the start button 1and move the biscuit shaper to another position.
4) Repeat the steps until you have shaped a sufficient number of biscuits.
NOTE
If the dough is too sticky, place it in the refrigerator for 15 minutes.
IB_100631_SGP28A1_LB4.indb 11IB_100631_SGP28A1_LB4.indb 11 25.07.14 08:0825.07.14 08:08

12 SGP 28 A1
GB Adding decorations
NOTE
Use the nozzles 9exclusively for shaping creamy substances, such as
whipped cream.
The decoration substance must have a soft and creamy consistency, otherwise
it will block the nozzle 9.
Press the start button 1only shortly to start with, to see how the substance
responds. It is possible that the substance may continue to flow out for a short
time.
1) Hold the biscuit shaper at a slight angle.
2) Press the start button 1.
3) As soon as the decoration substance starts to flow from the nozzle 9, move
the biscuit shaper in accordance with the decorative design you wish to create.
NOTE
If the pusher 6blocks during use, it may be that the substance or the dough
is too firm. Remove all of the substance/dough and, if necessary, mix a little
liquid into it.
Refilling with dough or decoration substance
DANGER
Remove the plug of the power cord 3from the mains socket before refilling
the dough or decoration substance.
1) Turn the container 7so that the arrow on the container 7moves from the
marking to the marking on the motor unit 4.
2) Remove the container 7from the motor unit 4. Push the threaded rod 5
with the pusher 6back into the motor unit 4.
NOTE
The mechanical propulsion between motor and pusher 6is only engaged if
the container 7is engaged in the motor unit 4. Thus if the container 7is
removed, you can simply push the pusher 6into the motor unit 4.
If necessary, also remove any dough residue that may have collected behind
the pusher 6.
DANGER
The motor unit 4may NOT be submerged in water. If necessary, it can be
wiped clean with a moist cloth.
IB_100631_SGP28A1_LB4.indb 12IB_100631_SGP28A1_LB4.indb 12 25.07.14 08:0825.07.14 08:08

13
SGP 28 A1
GB
3) Clean any parts that may be covered with dough and dry them well.
(See chapter "Cleaning").
4) Add dough or decoration substance to the biscuit shaper. Then reassemble
the biscuit shaper and resume your work.
Dismantling the biscuit shaper
DANGER
Remove the mains cable plug 3from the mains socket before taking the
appliance apart.
1) Unscrew the locking ring q.
2) Turn the container 7, so that the arrow on the container 7moves from the
marking to the marking on the motor unit 4.
3) Remove the container 7from the motor unit 4. The threaded rod 5and
the pusher 6can now also be removed.
Tips
■ If required, remove residues from the biscuit shaper with a knife, pastry
scraper or similar.
■ The consistency of the pastry or the decoration substance should be such
that it flows easily through the openings in the pattern discs wor nozzles 9
and remains affixed onto the baking paper or the item being decorated.
■ If the appliance does not start, it may be because the dough or the decora-
tion substance is too firm or that the container 7is not correctly attached to
the motor unit 4.
■ If the dough is too firm to be processed, knead in some egg yolk or add a
little liquid.
■ Biscuit dough that has been kept in the refrigerator can be too firm for
processing.
■ If the dough to be processed is too soft, place it in the refrigerator for about
15 minutes or knead in a little flour.
■ If the biscuit dough contains finely ground constituents (e.g. nuts or almonds),
select a pattern disc wwith larger openings.
■ With some doughs and pattern discs wit is better to work quickly, with
others, better to work slowly.
■ Simply use trial and error until you can produce biscuits that match your
expectations.
■ If you want to use various pattern discs wor nozzles 9, first of all use all
of the currently filled pastry or decoration substance.
Do not change the pattern discs w/nozzles 9until you refill the biscuit shaper.
IB_100631_SGP28A1_LB4.indb 13IB_100631_SGP28A1_LB4.indb 13 25.07.14 08:0825.07.14 08:08

14 SGP 28 A1
GB Cleaning
WARNING! DANGER TO LIFE DUE TO ELECTRIC SHOCK!
Risk of injury when cleaning the appliance!
To avoid risks, observe the following safety instructions:
► Remove the mains cable plug 3from the mains socket before cleaning the
appliance.
The motor unit 4should not be submerged in liquid.
CAUTION
Damage to the appliance!
► To avoid irreparable damage, ensure that no moisture can get into the mo-
tor unit 4when you are cleaning the appliance.
► When cleaning the surfaces use neither abrasive or chemical cleaners, nor
sharp or scratchy objects.
■ As it is difficult to remove dried-on dough residue, always clean the biscuit
shaper and the pattern discs wused directly after use.
■ Dismantle the Biscuit Shaper completely.
■ With the exception of the motor unit 4, all of the components can be
cleaned in the dishwasher or mild soapy water. All parts except the motor
unit 4are dishwasher-proof.
■ Clean the motor unit 4with a damp cloth. For stubborn soiling use a mild
detergent on the cloth. Afterwards, wipe off with a cloth moistened only with
water to ensure that no detergent remains on the appliance. Remove any
dough residue from the joint of the handle.
IB_100631_SGP28A1_LB4.indb 14IB_100631_SGP28A1_LB4.indb 14 25.07.14 08:0825.07.14 08:08

15
SGP 28 A1
GB
Storage/disposal
Storage
If you plan not to use the appliance for a long period, store it in a clean, dry
place away from direct sunlight.
To return the appliance to its packaging, you can fold the handle 290 degrees
in the direction of the motor unit 4.
Disposal of the appliance
Under no circumstances should you dispose of the appliance in
normal household waste. This product is subject to the provisions
of European Directive 2012/19/EU-WEEE (Waste Electrical and
Electronic Equipment).
Dispose of the appliance via an approved waste disposal company or your
municipal waste disposal facility. Please observe applicable regulations. Please
contact your waste disposal facility if you are in any doubt.
Appendix
Notes on the Declaration of Conformity
This appliance complies with the essential requirements and
other relevant provisions of the European Electromagnetic
Compatibility Directive 2004/108/EC, the Low Voltage
Directive 2006/95/EC and the Ecodesign Directive
2009/125/EC (Ordinance 1275/2008 Annex II, No. 1)
as well as the RoHS directive 2011/65/EU.
The complete Declaration of Conformity, in its original form, is
available from the importer.
Technical data
Electric biscuit shaper
Voltage supply 230 V ~ | 50Hz
Power consumption 28 W
Protection class II
CO time 2 minutes
CO time
The CO time (continuous operation time) is the amount of time an appliance can
be operated without the motor overheating and becoming damaged. After the
appliance has been operated for this duration of time, switch it off until the motor
has cooled down.
IB_100631_SGP28A1_LB4.indb 15IB_100631_SGP28A1_LB4.indb 15 25.07.14 08:0825.07.14 08:08

16 SGP 28 A1
GB Warranty
You are provided a 3-year warranty on this appliance, valid from the date
of purchase. This appliance has been manufactured with care and inspected
meticulously prior to delivery.
Please retain your receipt as proof of purchase. In the event of a warranty claim,
please contact your Customer Service unit by telephone. This is the only way to
guarantee free return of your goods.
NOTE
► The warranty only covers claims for material and manufacturing defects,
not for damage sustained during carriage, components subject to wear
and tear or damage to fragile components such as switches or batteries.
This appliance is intended solely for private use and not for commercial pur-
poses. The warranty shall be deemed void in the case of misuse or improper
handling, use of force and interventions which have not been carried out by one
of our authorised Service centres.
Your statutory rights are not restricted by this warranty. The warranty period
is not prolonged by repairs effected under the warranty. This also applies to
replaced and repaired components.
Any damage and defects present at the time of purchase must be reported im-
mediately after unpacking, but no later than two days after the date of purchase.
Repairs effected after expiry of the warranty period shall be subject to charge.
Service
Service Great Britain
Tel.: [phone] (£ 0.10/Min.)
E-Mail: [email protected]
IAN 100631
Hotline availability: Monday to Friday 08:00 - 20:00 (CET)
Importer
KOMPERNASS HANDELS GMBH
BURGSTRASSE 21
44867 BOCHUM
GERMANY
www.kompernass.com
IB_100631_SGP28A1_LB4.indb 16IB_100631_SGP28A1_LB4.indb 16 25.07.14 08:0825.07.14 08:08

17
SGP 28 A1
GB
Recipes
You can process commercially available ready-made pastry with the biscuit shaper.
Spritzgebäck cookies 1
♦ 150 g butter
♦ 100 g powdered sugar
♦ 1 sachet of vanilla sugar
♦ 1 egg white
♦ 200 g flour (type 405)
♦ 1 pinch salt
1) Whip the butter until frothy, blend in the sugar, vanilla sugar and the unbeaten
egg white; then stir the mixture with a hand mixer for about 8 minutes.
2) Blend in the flour, then fill the dough into the biscuit shaper.
3) Make small biscuits on the tray with the biscuit shaper.
4) Bake in a convection oven for 12–15 minutes at 175–190°C.
The edges should be golden brown. Allow the biscuits to cool on the baking tray.
TIP
► Melt some plain cooking chocolate in a water bath. Trickle 1 teaspoon of
chocolate onto each cooled cookie and garnish with a walnut.
NOTE
► Depending on the size of the biscuits, the baking times can vary.
IB_100631_SGP28A1_LB4.indb 17IB_100631_SGP28A1_LB4.indb 17 25.07.14 08:0825.07.14 08:08