SilverStar LT-215 User manual

LT-215
RGB LASER LIGHT
USER MANUAL
www.yagang.conm Version 1.0
Professional LightingProfessional Lighting
SILVER STARSILVER STAR
2005.11.17

1
Open box to check
ØWhen you receive the product, take it gently check if there is problem which cause
in transportation. At the same time please pay attention to see if there are some
parts enclosed:
INSTALLATION
ØPlease confirm whether the voltage you have is same as signed on the light before
install.
ØInstalled by technician. It muse be placed safety and best light angle.
ØMust keep space between light equipments and combustibles more than half a
meter. Keep space between light equipments and wall more than 0.15 meter.
ØThe fans and vent-pipes should not be jammed by other equipment and decorate
materials.
ØThe light must be fixture installed.
ØIn safety view please put ground wire into the ground.
ATTENTION
ØPlease do not open the bottom cover yourself without permission. Operate it
accord the user manual. Please call the technician in case the machine broken
down.
ØDo not use it under the damp and rain.
ØPay attention to prevent the light from strong bump.
ØPrevent the dust into the product
ØKeep the vent-pipe well while working.
ØKeep the plug insert well before put into power.
ØDon't look the light directly to prevent make some destroy with eyes.
ØDon't light or extinguish frequently, otherwise the life span of the light tube will be
shortened.
ØIn view of the special characters, after operated the light an hour the product shall
be paused about 15 minutes before be used next time.
ØKeep the space between light equipments and the lighted things more than one
meter.
ØDon't touch the product and draw the power line if you hand wet.
ØDon't open the cover for there have no parts the user can repair.
1. 1unit laser light 2. 1pc power cable
3.1pc Pin3 signal cable 4. 1pc user manual

Technology paramters
Cooling mode Air cooling (DPSS)
Input voltage AC220~240V 50/60Hz
Total power 50W
Colour Red Yellow Green Cyan Blue Purple White
DMX Channel 13
Scanner Simple scan motor
Scan angle 0~ 30
Control mode Music mode, Auto-mode, Master/slave, DMX512
ØDon't operate the light without lamps.
ØIf the semiconductor laser doesn't as light as before or there have some destroy
with lens or other parts, please contact the distributor in time.
ØWhen you want to retransfer the products, you'd better use the original package
to shockproof.
Maintain
Please use cotton stick dipped alcohol to wipe the mirrors at regular. Do
not use the wet cloth or chemical impregnant to clean the mirrors.
Please use the soft cloth to clean the surface of product.
ATTENTION:Disconnect input power before maintain.
NOTE: Don't seperate laser machine from laser power and repaire them by
yourself otherwise no good repair service will be supplied.i
Don't look straightly at the light sources.
2

Function code setting
DMX address code setting
Binary code
Address switch
Alogorism
Switch for DMX control mode.
The setting in the picture is signal
acceptable.
Address switch
Function
Music-mode
Audo-mode
Slave mode
Panel operation
POWER
SWITCH
DMX
OUTPUT DMX INPUT
Front panel
Back panel
2
1
3
4
6
57
8
9
POWER Power LED
Beam out: Inset mirror
POWER In fuse inside
POWER ON/OFF Power switch
DMX IN/OUT DMX512 signal
Security key switch Switch on/off power
MIN MAX Potentiometer
MIC: Music receiver
1
2
3
4
5
6
7
8
9ADDRESS: Address code switch. The 10th code is switch code. If the 10th code is
OFF, the 1-9 codes are function code. If the 10th code is ON, the fixture can be
controlled by DMX512 signal and other codes are DMX address codes.
3

4
LT-215 RGB LASER LIGHT
LT-215 DMX Channel List
cu
Automaticacceleratedmanualmode
MusicActive,Channel5~13outoffunction
Auto-mode,Channel5~13outoffunction
Soundacceleratedmanualmode
Fntion
1ControlMode
Channel Value
0~63
64~127
128~191
192~255
127Patterns
42Class speed (0~255)/6=(0~42)
No function
Horizontal rotating (Around Y axis)
Vertical rotating
Horizontal & Vertical rotating
No function
Rotating
Dotting(Only dot, noline)
Dotrotating
Nofunction
Horizontalmovement
Verticalmovement
Sidelongmovement
Nofunction
ExtendinVertical
ExtendinHorizontal
ExtendinHorizontal&Vertical
(0~255)/6=(0~42) 0 no function
255 class speed(From slow to fast)
42 class size (1~255)/6=(0~42)
1~19 smaller 20 Original size 21~42 Enlarge
Nofunction
Fromsmall tolarge
Fromlargetosmall
Fromsmall tolargeandthentosmall
255class speed (From fast to slow)
Original size
White
Blue
Cyan
Green
Yellow
Red
Close
Basic colours
0~255
3 Pattern
0~255
4 Speed
0~63
64~127
128~191
192~255
5Main Pattern
Rotating
6Dot Rotating
0~63
64~127
128~191
192~255
0~63
64~127
128~191
192~255
7 Move
0~63
64~127
128~191
192~255
0~63
64~127
128~191
192~255
8Extend
0~255
0~255
0~255
9
10
11
12
13
Zoom
Pattern Size 0
Drawing speed
Scan speed
Colour speed
2Colourof
mainpattern
0~22
23~45
46~68
69~91
92~114
115~137
138~160
161~183
184~206
207~229
230~252
253~255
Single Colour change
Stochastic colour change(Basic colour + one new colour)
Rainbow colour flow
1~255
Purple
(Around X axis)
(Around Z axis)

Problem andAnswer
Problem Causation Replace part Serries number
No Power Fuse broken Fuse
Scanner broken Scanner
Power supply broken 15V
No response to
Music or it is
difficult be actived
by music
MIC Broken
Code control board
Potentionmeter broken
MIC
Code control board
Potentionmeter
78E58BIC broken
Code control board broken
X,Yscanner no
strength or no
patternor scanner
shaking
78E58BIC
78E58BIC Broken 78E58BIC
Code control board
09-00-3001-01
16-03-0001-00
16-03-0001-00
26-2A-LT6V20-00
04-03-0105-03
00-78E58B-00
15-01-0002-00
00-78E58B-00
26-2A-LT6V20-00
Can not control
other function
OK,Such as laser
diode and fans
Code board broken
Control mode
incorrect Refer to manual
Super speed code control board
Power supply broken 12V
Address code board broken L 6Address code board
26-2A-LT6V20-00
16-03-0019-00
26-2A-LT6SW-00
No beam or beam
dim or beam can't
close, but other
functions OK
Power supply broken
15V
Scan board broken Scan board
16-03-0001-00
26-2A-FASTSCAN-00
Code board broke Super speed code control board
Operation mode
incorrect Refer to manual
26-2A-LT6V20-00
Scan mirror dirty
Laser diode broken
Clean with alchole
Green laser diode
Red laser diode
Blue laser diode
07-01-0005-00
07-03-0080-00
07-02-0020-01
Power supply broken 15V 16-03-0001-00
5