fantastic furniture Sofasaurus Chair 1 Seater + Foot Stool... User manual

Sofasaurus
Chair 1 Seater + Foot Stool Natural
fantasticfurniture.com.au
Version 1.0

Page 2
Looks like you’ve found
your Fantastic!
Love it? Share it!
Fantastic buy! Share how it looks at home on Instagram for
your chance to win a $250 Fantastic Furniture Gift Card!
@fantasticfurniture
We’re thrilled you’ve chosen Fantastic Furniture
to help create a home you’ll love!
fantasticfurniture.com.au

Assembly checklist
Useful information
Read through the instructionscarefully
before you begin.
Identify and lay out all of the components
before you begin assembly.
! Never use power tools unless specifically instructed. They can damage your components or
hardware if used incorrectly.
components please visit our website Help Centre for further assistance.
! Periodically check and re-tighten all fasteners. Check the product care label or website for
product care instructions.
! Never use any glue until you are certain that the parts belong together.
! Bulky items such as wardrobes and bunk beds should be assembled in the room they will be
used as they may not fit through a door once assembled.
! Always use a soft surface (such as carpet or cardboard) when assembling your product to
avoid scratching or damaging the surface of the product.
! The most common mistakes made during assembly are using the wrong hardware or getting
components back to front.
Unless instructed, do not fully tighten screws
until the item is fully assembled.
Make sure you have all the required tools.
Never use power tools unless instructed.
! Please see page 2 for any safety requirements or weight restrictions.
Page 3fantasticfurniture.com.au

Parts list
Armchair (P1);
What you need
to assemble the product
Foot Stool (P2);
8
x Wooden Legs (P3);
Hardware pack
8 x Bolts
(H1)
8 x
Flat Washers 1 x Allen Key
(H2) (H3)
Page 4fantasticfurniture.com.au

Step 1
Step 2
You will need
4 x
Flat
Washers
(H2)
1 x
Allen
(H3)
4 x Wooden
Legs
(P3)
4 x Bolts
(H1)
If the bolt can’t be fitted into the hole
well, please slope the leg until the bolt
can be inserted into the hole completely
as shown, then screw
the bolt to the bottom.
(P3)
(H3)
(H1)
(H2)
(P1)
side hole
(P3)
(H3)
(H1)
(H2)
(P2)
side hole
To attach a leg to the armchair, first fix
the dowel in the leg into the side hole
on the underside of the armchair.
Then screw 1
x bolt (H1) and 1 x washer
(H2) by using the allen key as shown.
Repeat this for the remaining legs.
Ensure to tighten bolts fully.
Page 5fantasticfurniture.com.au
4 x Wooden
Legs
(P3)
You will need
4 x
Flat
Washers
(H2)
1 x
Allen Key
(H3)
4 x
Bolts
(H1)
If the bolt can’t be fitted into the hole well,
please slope the leg until the bolt can be inserted into the hole completely
as shown, then screw the bolt to the bottom.
To attach a leg to the foot stool, first fix the dowel
in the leg into the side hole on the underside of
the foot stool.
Then screw 1
x bolt (H1) and 1 x washer (H2) by
using the allen key as shown.
Repeat this for the remaining legs. Ensure to
tighten bolts fully.
(P1)
dowel
dowel
(P2)

Page 6fantasticfurniture.com.au
Step 3
Job complete!
In the interest of our environment please dispose
of all packaging thoughtfully.