Form
#
Z366A
Model 5054N5054AM6
Date2-O~/A
u
Medium Die Grinder
Operator
Instructions
Includes
-
Foreseen Use,Work Stations, Putting Into Service,
Operating,Dismantling,Assembly and Safety Rules.
Manufacturer/Supplier
SiouxTools, Inc.
RecommendedWorking
Maximum
117LeviDrive
Murphy, NC28906
U.S.A.
Tel No. 828-835-9765
Fax
No. 828-835-9685
6.2 bar 90 PSI
6.2 bar 90 PSI
Product NetWeight
1.34
Ibs
0.61 Kg
SAFETY MESSAGES
Personal
SafetyEquipment
Use
-
Safety Glasses YES
Use
-
Safety Gloves YES
Use
-
Safety Boots
Use
-
BreathingMasks YES
Use
-
Ear Protectors YES
RecommendedUseOf
BalancerOrSupport
NO
A
WARNING
Always
Read
Instructions
Before
UsingPowerTools
Air Pressure
@
Always
Wear
Safety
Goggles
@
Wear
HearingProtection
Avoid
Prolonged
Exposure
To
Vibration
Safety rules when using
5054Al
5054AM6
Die Grinders
-Use accessories rated at least 22,000RPM.
-
Prolonged exposure to vibration may cause injury.
-Read all instructions before using this tool. All
operators must be fully trained inits use and aware of
these safety rules.
-
Do not exceedthe maximumworking air pressure.
-
Use personal protection equipmentas recommended.
-
Some dust created by power sanding, sawing, grinding,
drilling, and other construction activities contains
chemicalsknownto causecancer,birthdefectsandother
reproductiveharm.
-Use only compressed air at the recommended
conditions.
-If the tool appears to malfunction,
,
remove from use immediately and
arrange for service and repair. If it is
not practical to remove tool from
service, then shut off the air supply
tothetool andwrite or havewritten a
warning noteandattach itto the tool.
-
Iftool isto be usedwitha balancer or
other suspension device, ensure that
the tool is firmly attached to the
suspension/support device.
-When operatingthetool, always keep
the body and particularly the hands
away from the working attachment
Important
Read these instructions carefully beforeinstalling,operating,
servicingor repairingthis tool. Keepthese instructionsinasafe
accessibleplace.
ProductType
RPM
22,000
Medium DieGrinders
per
Noise Level: Sound PressureLevel 91.0 dB(A)
SoundPowerLevel 102.0 dB(A)
-
-
--
Recommended HoseBore
Size
-
Minimum
114 ins 8 mm
Test Method: Tested
in
accordance
with
Pneurop
test codePN8NTC1
and
IS0Standard 3744
RecommendedMax.
HoseLength
30Ft 10M
Vibration Level Lessthan 2.5 Meters
/
Sec2
Test Method: Tested
in
accordance with
IS0
standards8662 Parts
1
&
13
fixed to the tool.
-The tool isnotelectrically insulated. Neveruse the tool
if there is any chance of coming into contact with live
electricity.
-Always when usingthe tool, adopt a firm footing and/or
position and grip the tool sufficiently only to overcome
any reaction forces that may result from the tool doing
work. Do not overgrip.
-Use only correct spare parts for maintenance and
repair. Do not improvise or make temporary repairs.
Major servicing and repairs should only be carried out
by persons trained to do so.
-Do not lock, tape, wire, etc. the 'On/Off valve in 'On'
position.The triggedlever, etc. must always be free to
returntothe 'Off' positionwhen released.
All
Pipe
And Fittings
Should
Be
112'
Or
Large
with
Sufficient
Capacity
To
Maintain
Recommended
Working Pressure
At
Easy
To
Reach
And
Air
Tool
Operate
Shut
Off
Valve
RecommendedAir Supply System Figure
1
PageNo
1
