Form
#
Z367A
Model
5055N5055AM6
Date
2-02/A
Mini DieGrinders
-
Right Angle Head
lmpofiant
Read these instructionscarefully before installing, operating,
servicingor repairingthis tool. Keeptheseinstructionsinasafe
accessible place.
Operator Instructions
fncludes
-
ForeseenUse,
Work
Stations, PuttingInto Se,wice,
Operatina Disrnantlin~,Assembly
and
Safety Rules.
SiouxTools, lnc.
11
7
Levi Drive
Murphy,NC28906
U.S.A.
Tel No. 828-835-9765 Fax
No.
828-835-9685
Personal
Safety
Equtpment
a
Always
Read
tnstruct+ons
Before
Us~ng
Power
Twis
Use
-
SafetyGfasses YES
1
@
Always
Wear
Safety
Use
-
Safety Gloves
YES
Goggles
Product NetWeight
1-10
lbs
0.50
Kg
Recommended Use
Of
Balancer
Or
Support
NO
arrange for service and repair. If it is
not practical to remove tool from
service, then shut off the air supply
tothetoot andwrite or havewritten a
warning noteandattachitto thetool.
-
Iftool isto be usedwith abalanceror
othersuspensiondevice,ensurethat
the tool is firmly attached to the
Air
Pressure
Recommendedworking
6.2
bar
90
PSI
Maximum
6.2
bar
90
PSI
Use
-
Safety Boots
Use
-
BreathingMasks YES
Use
-
Ear Protectors YES
suspension/supportdevice.
-
When operatingthetool,alwayskeep
the body and particularlythe hands
@
Wear
Hearlng
Protect~on
A
~~~~~~ged
Ewsufe
away from the working attachment
fixed to the tool.
Safety rules when using 5055Al
5055AM6 Die Grinders
-
Useaccessoriesratedat least20,OOORPM.
-
Prolongedexposure to vibration may cause injury.
-Read all instructions before using this tool. All
operatorsmust be fully trained in its use and aware of
these safety rules.
-
Do not exceed the maximumworking air pressure.
-
Use persona[ protectionequipmentas recommended.
-
Some dust createdby power sanding,sawing, grinding,
drilling, and other construction activities contains
chemicalsknownto causecancer,birthdefects and other
reproductiveharm.
-Use only compressed air at the recommended
conditions.
-If the tool appears to malfunction,
remove from use immediatelv and
7
ProductType
RPM
MiniDieGrinders
-
Cvcies
I%{
MI^
Right Angle Head
5055A
-
1/4"
5055AM6
a
6
mm
Test Method:
Tested
in
accordance with Pneurop
test code PN8NTCl and
IS0
Standard 3744
Recommended Hose Bore
Size
-
Minimbm
I14
ins
8
rnm
Vibration Level
2.5
Meters
i
See2
RecommendedMax.
Hose Length
30
Ft
10
M
Test Method:
Tested inaccordance with IS0
standards8662 Parts 1
&
17
NoiseLevel:
Sound Pressure Level 93.0 dB(A)
Sound Power Level 104.0 dB(A)
-
The toolisnotelectricallyinsulated.Never usethe tool
if there is any chance of coming into contact with live
electricity.
-
Always when usingthetoot, adoptafirmfooting and/or
positionand grip the tool sufficiently onlyto overcome
any reactionforcesthatmay result from the tool doing
work. Do not overgrip.
-Use only correct spare parts for maintenance and
repair. Do not improvise or make temporary repairs.
Major servicingand repairsshould only be carriedout
by personstrain~dtodo so.
-
Do not lock, tape, wire, etc. the 'On/OfY valve in 'On'
position.The triggerllever, etc. must always be free to
returnto the 'Off' positionwhen released.
-Always shut off the air supply to the tooland press the
All Pipe
And
Fittings
Should
Be
11T
Or
Large
with
Suflicient
Capacity
To
Maintain
Recommended
Working
Pressure
At
Recommended Air Supply System Figure
1
PageNo
1
