Safety Information
It is important that you read the following safety information prior to us-
ing your Skiva PowerSkin IP5S.
• To charge your IP5S, use the manufacturer’s USB
charger. Using alternate chargers may damage
the device.
• Do not attempt to charge the IP5S0 with a defective
charger.
• KeeptheIP5Sawayfromwater,re,extremecoldor
extremeheat.
• Donotuseexcessiveforcewhenapplyingthecaseto
your mobile device.
www.skivatech.com
Skiva PowerSkin IP5S 2000mAh
Battery Case with lightning port
3
(c) 2014 Skiva Technologies, Inc. All rights reserved. All trade names
are registered trademarks of respective manufacturers listed.
Getting started
1) Connect the IP5S to your computer with the USB connector pro
vided. When connected properly, the LED lamp will illuminate.
2) Observe the charging progress in the capacity indicator.
The capacity indicator light will turn green when charging is
complete.
3) Disconnect the IP5S from your computer after the case is fully
charged. Leaving the device connected after the battery is
fully charged might reduce the battery’s capacity in future
charges.