Sloan TRUFLUSH TRF 8036 User manual

Code No. 08160054
Rev. 1(11/21)
INSTALLATION INSTRUCTIONS FOR
TRUFLUSH ELECTRONIC DUAL FLUSH FLUSHOMETERS
LIMITED WARRANTY
Unless otherwise noted, Sloan India Pvt. Ltd warrants this product,
manufactured and sold for commercial or industrial uses, to be free
from defects in material and workmanship for a period of five (5)
years and 1 Year- All Electronic & battery not covered in warranty
from date of first purchase. During this period, Sloan India Pvt. Ltd
will, at its option, repair, replace, or refund the purchase price of any
product which fails to conform with this warranty under normal use
and service. This shall be the sole and exclusive remedy under this
warranty. Products must be returned to Sloan India Pvt. Ltd, at
customer’s cost. No claims will be allowed for labor, transportation or
other costs. This warranty extends only
to persons or organizations who purchase Sloan India Pvt. Ltd
products directly from Sloan India Pvt. Ltd for purpose of resale. This
warranty does not cover the life of the batteries.
THERE ARE NO WARRANTIES WHICH EXTEND
BEYOND THE DESCRIPTION ON THE FACE
HEREOF. IN NO EVENT IS SLOAN INDIA PVT. LTD
RESPONSIBLE FOR ANY CONSEQUENTIAL
DAMAGES OF ANY MEASURE WHATSOEVER.
TruFlush Model:
TRF 8036
PRIOR TO INSTALLATION
TOOLS REQUIRED FOR INSTALLATION
• Phillips screwdriver
This valve is designed for new construction or where there is easily
accessed plumbing for the xture and the valve.
This valve is designed for minimum six inch (152 mm) wall space
depth. Distance from center of the valve (inlet or outlet pipe) to the
nished surface of the wall can vary from 2”-3” (51-76 mm).
Wall plate opening must be of 5.6” x 5.6” (142 x 142 mm). Mud plate
is provided and must accompany valve for proper installation. Mud
plate is removed after wall is nished.
ITEMS INCLUDED WITH THE PRODUCT
1. Wall Box and Electronic Valve Assembly
2. Mud Guard
3. Adjustment Tool
4. (2) #8-32 x 2” screws to secure mud guard
5. (2) 1/4”-20 x 2” screws to remove activation
assembly
6. Installation instructions
ITEM #1: WALL BOX AND
ELECTRONIC VALVE
ASSEMBLY
ITEM #2: MUD GUARD
ITEM #3: ACTIVATION
ASSEMBLY TOOL
ITEM #4: #8-32 X 2" TRUSS
HEAD SCREWS
ITEM #5: 1/4-20 X 2"
SCREWS
SENSOR VALVE BOX
ITEM #1: WALL BOX ITEM #2: WALL PLATE ITEM #3: SENSOR ASSEMBLY ITEM #4: ACTIVATION BUTTON ITEM #5: BATTERY PACK ITEM #6: 4X BATTERIES ITEM #7: 4X #8-32 X 2"
TRUSS HEAD SCREWS
ITEM #7: 5/64" HEX KEY
WALL PLATE BOX
2. Mud Guard
1. Wall box and electronic
Valve Asembly
4. Mud Guard Screws
3. Adjustment Tool
VALVE BOX
ITEM #1: WALL BOX AND
ELECTRONIC VALVE
ASSEMBLY
ITEM #2: MUD GUARD
ITEM #3: ACTIVATION
ASSEMBLY TOOL
ITEM #4: #8-32 X 2" TRUSS
HEAD SCREWS
ITEM #5: 1/4-20 X 2"
SCREWS
SENSOR VALVE BOX
ITEM #1: WALL BOX ITEM #2: WALL PLATE ITEM #3: SENSOR ASSEMBLY ITEM #4: ACTIVATION BUTTON ITEM #5: BATTERY PACK ITEM #6: 4X BATTERIES ITEM #7: 4X #8-32 X 2"
TRUSS HEAD SCREWS
ITEM #7: 5/64" HEX KEY
WALL PLATE BOX
5. Activation Assembly
Screws
6. Instructions
• Adjusting tool (supplied) •Water Level

Finished Wall Finished Floor
1 1/2” NPT
INLET
1 1/2”
OUTLET
NPSM
2” (51 mm) MINIMUM
3” (76 mm) MAXIMUM
C.L. TO FINISHED WALL
2.0” - 4.0”
(50 mm - 100 mm)
Toilet Seat
(not supplied)
4.5”-6.5”
(114 mm-165 mm)
2” (51 mm) NOTE : Flush Connections shown in dotted lines
not included.
ROUGH-IN
WITH THE EXCEPTION OF INLET,
DO NOT USE PIPE SEALANT. DO NOT
USE PLUMBING GREASE ON VALVE
COMPONENTS OR COUPLINGS!
!!! IMPORTANT !!!
1. CONNECT FLUSHOMETER
SLOAN’S FLUSHOMETERS ARE DESIGNED TO OPERATE WITH 20 TO 80
PSI (138 TO 552 KPA) OF WATER PRESSURE. THE MINIMUM PRESSURE
REQUIRED TO THE VALVE IS DETERMINED BY THE TYPE OF FIXTURE
SELECTED. CONSULT FIXTURE MANUFACTURER FOR MINIMUM PRESSURE
REQUIREMENTS. MOST HIGH EFFICIENCY WATER CLOSETS REQUIRE
A MINIMUM FLOWING PRESSURE OF 25 PSI (172 KPA). MANY BUILDING
CODES AND THE ASME A112.19.2 FIXTURE STANDARD LIST MAXIMUM
STATIC WATER PRESSURE AS 80 PSI (552 KPA).
CLOSET
40”
(1016 mm)
2. Connect the inlet pipe to top (“IN”)
and fixture flush connection
to bottom (“OUT”) of
flushometer.
3. Reinstall mud guard to valve. Use the mudguard
1. Remove the mudguard and save it for
later use- DO NOT DISCARD. screws (supplied).
MAKE SURE SUPPLY LINES ARE FLUSHED OUT. DEBRIS CAN DAMAGE
THE VALVE OR CAUSE VALVE TO MALFUNCTION. DO NOT CONTINUE THE
INSTALLATION UNTIL SUPPLY LINES ARE CLEAR.
!!! IMPORTANT !!!
!!! IMPORTANT !!!
2

Finished Wall
4. Use the Water Level to make sure the Valve is level. Finish the wall. Use
marks on mudguard to make sure finished wall is in between 2” (51 mm)
and 3” (76 mm) from centerline of the inlet pipe.
5. Only Remove the mudguard when installing Wall Plate. For more information
Refer Wall Plate Installation Manual (08160044).
Note: Removing the Mudguard beforehand might result in damge to the solenoid
from debris.
2. CONNECT FLUSHOMETER (HARDWIRE CONNECTION)
TRANSFORMER NOT PROVIDED. IT IS VERY IMPORTANT THAT THE
OUTPUT VOLTAGE OF THE TRANSFORMER MUST BE 6VAC FOR THE UNIT
TO FUNCTION PROPERLY. SLOAN EL-386 OR EL-451 IS RECOMMENDED
(120 VAC/6VAC) OR ELG-220 (220VAC/6VAC).
1. Remove one of the knockout caps and route the transformer wire trough it inside
wall box.
NOTE: Use a conduit pipe to protect the transformer wire from damage during
installation.
2.Finish the wall as instructed above.
!!! IMPORTANT !!!
3

4
Item Description
No.
1 Valve Assembly Less Plate
2 Piston Assembly
3 Activation Assembly
PARTS LIST
2
3
1
For complete listing of items available for repair, please consult Maintenance and Repair Guide.
available on www.sloan.in
2.. INSTALL WALL PLATE ASSEMBLY
Refer Wall Plate Installation Manual (08160044).
© 2021 SLOAN
Code No. 08160054
Rev. 1(11/21)
Manufactured by Sloan India Pvt. Ltd, patents pending.
SLOAN INDIA PRIVATE LIMITED
344, PHASE-II UDYOG VIHAR, GURGAON 122015 Phone: [phone]
Toll Free: 1800.123.3080 | [e-mail] | sloan.in | copyright © 2021 Sloan All rights reserved
Wall Plate Assembly Installation Manual (08160044), available on www.sloan.in