SMART-AVI AR-100S User manual

© Copyright 2017 Smart-AVI, All Rights Reserved
Notice
The information contained in this document is
subject to change without notice. Smart-AVI makes
no warranty of any kind with regard to this material,
including but not limited to, implied warranties of
merchantability and fitness for any particular
purpose.
Smart-AVI will not be liable for errors contained herein
or for incidental or consequential damages in
connection with the furnishing, performance or use
of this material.
No part of this document may be photocopied,
reproduced or translated into another language with
out prior written consent from Smart-AVI.
For the complete manual, visit www.smartavi.com.
Extend any RS232 and stereo device up
to 3000ft using a single Cat5 cable.
AR100
www.smartavi.com
User Manual
11651 Vanowen St.
North Hollywood, CA 91605
Phone: [phone]
Facsimile: [phone]
Technical Specifications
SNOITACIFICEPS001R SA NOITACIFICEPS001RA SNOITACIFICEPS001RA SNOITACIFICEPS001R SA NOITACIFICEPS001RA
232S )R elaM9BD-XR()elameF9BD-XT(
locotorP duabllaottnerapsnart,xelpudlluF
etar
oiduA
oiduAoeretSepyTlangiS
Bd0,zHM51htdiwdnaB
mhO001ecnadepmI
elameF,kcajinimmm5.3rotcennoC
5ta tC f0033otpu,5taCPTU
rewoP CDV5
snoisnemi ”D 528.)H(x”57.2)W(x”5.3)L(
thgieW sbl02.0

Introduction
The AR100 RS232 - Sound Cat5 extender allows
you to extend any full Duplex RS232 with any
Stereo sound up to 3000ft using a single
unshielded Cat5 cable.
Features
Unbalanced stereo line level analogue audio to
be transmitted via UTP Cat5 Hi-fidelity audio
frequency response.
Extend any touch screen up to 3000ft.
Extend any sound system up 3000ft.
Supports all protocol and baud rates.
Uses easy to install inexpensive CAT5.
Output reaches up to 3000 feet.
Compatible with line level stereo audio signals.
High ground loop immunity.
Built-in lightning, power surge and transient
protection.
Remote units come with buffered outputs.
Compact enclosure.
Optional power supply for remote unit.
Fully transparent path for all protocols and data
transfers.
ApplicationsApplications
ApplicationsApplications
Applications
Hotel
Cable TV remote control
Control rooms
Remote On-Digital set-top control
Sky box control extension and switcher output
Dealer rooms
Point of Sale
Remote VCR control
What’s in the box?
Installation Diagram
Connecting The TransmitterConnecting The Transmitter
Connecting The TransmitterConnecting The Transmitter
Connecting The Transmitter
1. Connect an RS232 cable and/or audio cable to the
souce unit.
2. Connect power supply to the unit. Observe LED
lighting up indicating power present
Connecting The ReceiverConnecting The Receiver
Connecting The ReceiverConnecting The Receiver
Connecting The Receiver
1. Connect an RS232 cable and/or audio cable to the
reveiver unit.
2. Observe LED lighting up indicating power present
Preparing & Connecting System CAT5 CablePreparing & Connecting System CAT5 Cable
Preparing & Connecting System CAT5 CablePreparing & Connecting System CAT5 Cable
Preparing & Connecting System CAT5 Cable
Following is the wiring standard for terminating CAT 5
cable using RJ-45 connector:
Pair 1 Pins 1 & 2
Pair 2 Pins 3 & 6
Pair 3 Pins 4 & 5
Pair 4 Pins 7 & 8
Connectors:Connectors:
Connectors:Connectors:
Connectors:RJ-45
Capacitance:Capacitance:
Capacitance:Capacitance:
Capacitance: 14 pf/ft (46.2 pf/m)
Conductor Gauge:Conductor Gauge:
Conductor Gauge:Conductor Gauge:
Conductor Gauge:24 AWG
Impedance:Impedance:
Impedance:Impedance:
Impedance: 100 +/- 15 ohms
4 - Pair
tnetnoCegakcaP001R tA netnoCegakcaP001RA tnetnoCegakcaP001RA tnetnoCegakcaP001R tA netnoCegakcaP001RA
ytQ ytQ ytQ ytQ yt sQ metI smetI smetI smetI smet .I oNtraP .oNtraP .oNtraP .oNtraP .oNtraP
t1 inurettimsnarT001R 0A 01XT-RA
t1 inurevieceR001R 0A 01XR-RA
y2 lppusrewopcdtlov5 VDC 2A5SP
Amplifier
ARTX100
ARTX100
ARRX100
AR RX100
CAT5Cable
CAT5Cable
SoundSource
Speaker
Speaker
Server Dump Terminal
5V 5V
5V5V