SMART-AVI DVX-ULTRA User manual

DVI-D and USB 2.0 Extender up to
250 feet over STP Cable
DVX-Ultra
DVI-D and USB 2.0 Extender
over STP
www.smartavi.com
Installation
Manual
Technical Specications
What’s in the Box?
PART NO. QTY DESCRIPTION
DVX-UTTXS 1 DVI-D+USB 2.0 Extender Transmitter
DVX-UTRXS 1 DVI-D+USB 2.0 Extender Receiver
Power Supply 2 PS5VDC4A
VIDEO
Format DVI-D Single Line
Maximum Pixel Clock 165 MHz
Input Interface (TX) DVI-D 29-pin female
Output Interface (RX) DVI-D 29-pin female
Resolution Up to 1920 x 1200 @60Hz
DDC 5 volts p-p(TTL)
Input Equalization Automatic
Input Cable Length Up to 20 ft.
Output Cable Length Up to 20 ft.
USB
Signal Type USB 2.0 (Fully Transparent)
Input Interface (TX) (1) USB Type B (Female)
Output Interface (RX) (4) USB Type A (Female)
OTHER
Power External 100-240 VAC/5VDC4A @20W
Dimensions 6.25 in W x 1 in H x 3.5 in D
Weight 1 lb
Operating Temp. 0-55 °C (32-131°F)
Storage Temp. -20-85 °C (-4-185 °F)
Humidity Up to 95%
© Copyright 2011 Smart-AVI, All Rights Reserved
NOTICE
The information contained in this document
is subject to change without notice. Smart-AVI makes
no warranty of any kind with regard to this material,
including but not limited to, implied warranties of
merchantability and fitness for any particular purpose.
Smart-AVI will not be liable for errors contained herein or for
incidental or consequential damages in connection with the
furnishing, performance or use of this material.
No part of this document may be photocopied, reproduced or
translated into another language without prior written consent
from Smart-AVI.
For more information, visit www.smartavi.com.
SmartAVI, Inc. / Twitter: smartavi
11651 Vanowen St., North Hollywood, CA 91605
Tel: [phone] Fax: [phone]
http://www.SmartAVI.com
DVX-UltraRX Rear
DVX-UltraTX Rear
DVX-UltraRX Front
DVX-UltraTX Front

DVX-Ultra-TX DVX-Ultra-RX
250 ft over 2 CAT6 STP
KEYBOARD
USB 2.0 FLASH DRIVE MOUSE
DVI
USB 2.0
COMPUTER
Introduction
The DVX-Ultra extends DVI-D Video and USB 2.0 up to
250 feet over 2 CAT6 STP Cables.
Connecting the DVX-Ultra
1. Power o all devices.
2. Connect a DVI-D source (computer) to the DVI-D
port of the DVX-Ultra-TX labeled .
3. Connect a USB source to the USB port of the the
DVX-Ultra-TX labeled .
4. Connect the DVX-Ultra-TX to the the DVX-Ultra-RX
with two STP (Sheilded Twisted Pair) cables using
the ports labeled and .
5. Connect a DVI monitor to the port of the DVX-
Ultra-RX labeled .
6. Connect up to 4 USB 2.0 devices to the ports on
the DVX-Ultra-RX labeled .
7. Connect the power supply to the ports labeled
on the DVX-Ultra-TX and DVX-Ultra-RX.
8. Power on the computer, displays and USB 2.0
devices.
Applications
• Medical Applications
• Industrial Work Areas
• Home Theater Integration
• Digital Signage Deployment
• Information Kiosks/Displays
• Film/Recording Studios
Features
• Extends USB 2.0 and DVI-D signals up to 250 feet
from the computer
• Data recovery for digital video
• Supports 1920x1200 digital video resolution
• Fully compliant with USB 1.1 and 2.0 specications
• Supports USB 1.1 (12 Mbps) and USB 2.0 (480
Mbps) data rates
• Integrated Four-Port Hub in the receiver
• Compatible with all operating systems
• External power adapter for transmitter and re-
ceiver unit
• Fully transparent USB (does not use any emula-
tion)
• Plug and play
Product - Installation Diagram
12