SMART-AVI HDX-W100 User manual

USER MANUAL
HDX-W100
Wall Plate HDMI Extender over Single
VIDEO
Resolution Full HD
(1920x1080 @ 60 Hz)
Color Depth Deep Color 36/30/24 it
at 1080p and 3D
Video andwidth 4.95 Gbps
Input Video Signal 1.2 Volts P-P
Input DDC Signal 5 Volts (TTL)
TECHNICAL SPECIFICATIONS
8 .AVI.2131
Tel: [phone] Fax: [phone]
11651 Vanowen St. North Hollywood CA 91605
SmartAVI.com
Designed and Manufactured in the USA
Extend HDMI signals up to 15 feet using slim,
space-saving wall plates
SYSTEM
Interface RJ-45
Cable
Requirements
CAT5/5e/6
Maximum Length 150 ft.
Input • HDMI-A 19PIN Socket
• 12VDC Jack
• Internal 12VDC Input
• 3.5mm Jack for IR
Receiver
Output • RJ45 Jack
• 3.5mm Jack for IR
Emitter
I/O CONNECTOR (Transmitter)
AUDIO
Format Up to PCM 8 channel,
Dolby Digital TrueHD,
and DTS-HD Master Audio
Input Interface HDMI (Integrated)
Output Interface HDMI (Integrated)
IR
Signal Type 38kHz
Interface 3.5 mm Jack Socket
(Female)
Input • RJ45 Jack
• 3.5mm Jack for IR
Receiver
• 12VDC Jack
• Internal 12VDC Input
Output • 3.5mm Jack for IR
Emitter
• HDMI-A 19PIN Socket
I/O CONNECTOR (Receiver)
OTHER
Max Power 12VDC2A @24W
Approvals UL, CE, ROHS Compliant
Operating Temp. 32-131°F (0-55 °C)
Storage Temp. -4-185 °F (-20-85 °C)
Humidity Up to 95%

INTRODUCTION
The HDX-W100 is an HDMI over Cat5e/6 extender
that utilizes slim wall plates to keep the wires as
concealed as possible while providing 150ft high-
quality HD video extension. The device supports high
-resolution video up to 1080p (@60Hz). The unit
makes controlling the attached video source easy
with its bi-directional IR communication, so users
can adjust the source while at the screen’s location,
hundreds of feet away. For corporate, academic,
industrial and home applications, the HDX-W100
provides a fully-integrated solution for HDMI exten-
sion. oth the transmitter and receiver can be pow-
ered through a single 12V power adapter connected
to the transmitter.
CONNECTING THE HDX-LX
1. Power off the HDMI source and display.
2. Connect an HDMI cable from the HDMI source to the HDMI IN port of the HDX-W100 trans-
mitter.
3. Connect an IR emitter (optional) to the IR OUT port on the transmitter.
4. Connect the HDX-W100 transmitter to the HDX-W100 receiver using a CAT5e/6 cable (up to
150ft).
5. Connect an IR receiver (optional) to the IR IN port on the receiver.
6. Connect an HDMI cable from the HDMI OUT port on the HDX-W100 receiver to the HDMI Dis-
play.
7. Connect the power on the HDX-W100 transmitter plugging in their power adapters
(12VDC2A) or provide 12VDC input from the rear DC input port.
NOTE: If the RX side has connected DC adapter, TX can get the DC power over the CAT5e/
CAT cable, so leave DC input port empty. Only 1 power supply is required for both units.
8. Power on the HDMI source, displays and speakers. The RX will read the EDID from the moni-
tor, and then pass the date into the TX automatically.
WHAT’S IN THE BOX?
PART NO. DESCRIPTION
HDX-W100S HDMI + IR Over a Single Cat5e/6 Wall
Plate Extender. Includes: [HDX-
W100TX, HDX-W100RX, PS12V2A]
APPLICATION DIAGRAM
FEATURES
• Extends HDMI Output over a Single Cat5e/6 Cable
• Extends IR Control Signals for Remote Control
• Supports uncompressed HD video up to 1080p
(@60Hz)
• HDMI 1.3 and HDCP Compliant
• Supports i-Directional IR Communication
• Transmits high-quality Dolby TrueHD and DTS-HD
Audio Signals
• Supports Automatic EDID Callback
• Compatible with DVI-D with Converter
• Cascadable for Additional Extensions
• VESA DDC and Hot Swap Technology (HPD)
• Receiver Features POE